The netcheck client, when no UDP is available, probes distance using
HTTPS.
Several problems:
* It probes using /derp/latency-check.
* But cmd/derper serves the handler at /derp/probe
* Despite the difference, it work by accident until c8f4dfc8c0
which made netcheck's probe require a 2xx status code.
* in tests, we only use derphttp.Handler, so the cmd/derper-installed
mux routes aren't preesnt, so there's no probe. That breaks
tests in airplane mode. netcheck.Client then reports "unexpected
HTTP status 426" (Upgrade Required)
This makes derp handle both /derp/probe and /derp/latency-check
equivalently, and in both cmd/derper and derphttp.Handler standalone
modes.
I notice this when wgengine/magicsock TestActiveDiscovery was failing
in airplane mode (no wifi). It still doesn't pass, but it gets
further.
Fixes#11989
Change-Id: I45213d4bd137e0f29aac8bd4a9ac92091065113f
So we can use it in trunkd to quiet down the logs there.
Updates #5563
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ie3177dc33f5ad103db832aab5a3e0e4f128f973f
I missed a case in the earlier patch, and so we're still sending 15s TCP
keepalive for TLS connections, now adjusted there too.
Updates tailscale/corp#17587
Updates #3363
Signed-off-by: James Tucker <james@tailscale.com>
The derper sends an in-protocol keepalive every 60-65s, so frequent TCP
keepalives are unnecessary. In this tuning TCP keepalives should never
occur for a DERP client connection, as they will send an L7 keepalive
often enough to always reset the TCP keepalive timer. If however a
connection does not receive an ACK promptly it will now be shutdown,
which happens sooner than it would with a normal TCP keepalive tuning.
This re-tuning reduces the frequency of network traffic from derp to
client, reducing battery cost.
Updates tailscale/corp#17587
Updates #3363
Signed-off-by: James Tucker <james@tailscale.com>
So derpers can check an external URL for whether to permit access
to a certain public key.
Updates tailscale/corp#17693
Change-Id: I8594de58f54a08be3e2dbef8bcd1ff9b728ab297
Co-authored-by: Maisem Ali <maisem@tailscale.com>
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Add a standalone server for STUN that can be hosted independently of the
derper, and factor that back into the derper.
Fixes#8434Closes#8435Closes#10745
Signed-off-by: James Tucker <james@tailscale.com>
Add a few helper functions in tsweb to add common security headers to handlers. Use those functions for all non-tailscaled-facing endpoints in derper.
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Make developing derp easier by:
1. Creating an envknob telling clients to use HTTP to connect to derp
servers, so devs don't have to acquire a valid TLS cert.
2. Creating an envknob telling clients which derp server to connect
to, so devs don't have to edit the ACLs in the admin console to add a
custom DERP map.
3. Explaining how the -dev and -a command lines args to derper
interact.
To use this:
1. Run derper with -dev.
2. Run tailscaled with TS_DEBUG_USE_DERP_HTTP=1 and
TS_DEBUG_USE_DERP_ADDR=localhost
This will result in the client connecting to derp via HTTP on port
3340.
Fixes#7700
Signed-off-by: Val <valerie@tailscale.com>
This updates all source files to use a new standard header for copyright
and license declaration. Notably, copyright no longer includes a date,
and we now use the standard SPDX-License-Identifier header.
This commit was done almost entirely mechanically with perl, and then
some minimal manual fixes.
Updates #6865
Signed-off-by: Will Norris <will@tailscale.com>
The Lufthansa in-flight wifi generates a synthetic 204 response to the
DERP server's /generate_204 endpoint. This PR adds a basic
challenge/response to the endpoint; something sufficiently complicated
that it's unlikely to be implemented by a captive portal. We can then
check for the expected response to verify whether we're being MITM'd.
Follow-up to #5601
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I94a68c9a16a7be7290200eea6a549b64f02ff48f
The io/ioutil package has been deprecated as of Go 1.16 [1]. This commit
replaces the existing io/ioutil functions with their new definitions in
io and os packages.
Reference: https://golang.org/doc/go1.16#ioutil
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
These errors aren't actionable and just fill up logs with useless data.
See the following Go issue for more details:
https://golang.org/issue/26918
Signed-off-by: Andrew Dunham <andrew@tailscale.com>
Convert ParseResponse and Response to use netip.AddrPort instead of
net.IP and separate port.
Fixes#5281
Signed-off-by: Kris Brandow <kris.brandow@gmail.com>
And flesh out docs on the --http-port flag.
Change-Id: If9d42665f67409082081cb9a25ad74e98869337b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
A large influx of new connections can bring down DERP
since it spins off a new goroutine for each connection,
where each routine may do significant amount of work
(e.g., allocating memory and crunching numbers for TLS crypto).
The momentary spike can cause the process to OOM.
This commit sets the groundwork for limiting connections,
but leaves the limit at infinite by default.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Surveying the fleet prior to turning off old/unused/insecure
TLS versions.
Updates tailscale/corp#3615
Signed-off-by: David Anderson <danderson@tailscale.com>
It's a basic "deny everything" policy, since DERP's HTTP
server is very uninteresting from a browser POV. But it
stops every security scanner under the sun from reporting
"dangerously configured" HTTP servers.
Updates tailscale/corp#3119
Signed-off-by: David Anderson <danderson@tailscale.com>
And the derper change to add a CORS endpoint for latency measurement.
And a little magicsock change to cut down some log spam on js/wasm.
Updates #3157
Change-Id: I5fd9e6f5098c815116ddc8ac90cbcd0602098a48
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Real goal is to eliminate some allocs in the STUN path, but that requires
work in the standard library.
See comments in #2783.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Add a mode control for derp server, and add a "manual" mode
to get derp server certificate. Under manual mode, certificate
is searched in the directory given by "--cert-dir". Certificate
should in PEM format, and use "hostname.{key,crt}" as filename.
If no hostname is used, search by the hostname given for listen.
Fixes#2794
Signed-off-by: SilverBut <SilverBut@users.noreply.github.com>
cmd/derper: listen on host of flag server addr for port 80 and 3478
When using custom derp on the server with multiple IP addresses,
we would like to bind derp 80, 443 and stun 3478 to a certain IP.
derp command provides flag `-a` to customize which address to bind
for port 443. But port :80 and :3478 were hard-coded.
Fixes#2767
Signed-off-by: Li Chuangbo <im@chuangbo.li>
This adds some convenient defaults for -c, so that user-provided DERPs require less command line
flags.
Signed-off-by: julianknodt <julianknodt@gmail.com>
This adds a flag to the DERP server which specifies to verify clients through a local
tailscaled. It is opt-in, so should not affect existing clients, and is mainly intended for
users who want to run their own DERP servers. It assumes there is a local tailscaled running and
will attempt to hit it for peer status information.
Updates #1264
Signed-off-by: julianknodt <julianknodt@gmail.com>
This adds a handler on the DERP server for logging bytes send and received by clients of the
server, by holding open a connection and recording if there is a difference between the number
of bytes sent and received. It sends a JSON marshalled object if there is an increase in the
number of bytes.
Signed-off-by: julianknodt <julianknodt@gmail.com>
For option (d) of #1405.
For an HTTPS request of /bootstrap-dns, this returns e.g.:
{
"log.tailscale.io": [
"2600:1f14:436:d603:342:4c0d:2df9:191b",
"34.210.105.16"
],
"login.tailscale.com": [
"2a05:d014:386:203:f8b4:1d5a:f163:e187",
"3.121.18.47"
]
}
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Brad Fitzpatrick
Andrew Dunham
James Tucker
Andrew Lytvynov
valscale
Will Norris
Eng Zer Jun
Andrew Dunham
Kris Brandow
Joe Tsai
David Anderson
Arnaud Dezandee
oocococo
Silver Bullet
Chuangbo Li
julianknodt