Due to iOS memory limitations in 2020 (see
https://tailscale.com/blog/go-linker, etc) and wireguard-go using
multiple goroutines per peer, commit 16a9cfe2f4 introduced some
convoluted pathsways through Tailscale to look at packets before
they're delivered to wireguard-go and lazily reconfigure wireguard on
the fly before delivering a packet, only telling wireguard about peers
that are active.
We eventually want to remove that code and integrate wireguard-go's
configuration with Tailscale's existing netmap tracking.
To make it easier to find that code later, this makes it modular. It
saves 12 KB (of disk) to turn it off (at the expense of lots of RAM),
but that's not really the point. The point is rather making it obvious
(via the new constants) where this code even is.
Updates #12614
Change-Id: I113b040f3e35f7d861c457eaa710d35f47cee1cb
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Switching to a Geneve-encapsulated (peer relay) path in
endpoint.handlePongConnLocked is expected around port rebinds, which end
up clearing endpoint.bestAddr.
Fixestailscale/corp#33036
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Saves only 12 KB, but notably removes some deps on packages that future
changes can then eliminate entirely.
Updates #12614
Change-Id: Ibf830d3ee08f621d0a2011b1d4cd175427ef50df
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Saves 86 KB.
And stop depending on expvar and usermetrics when disabled,
in prep to removing all the expvar/metrics/tsweb stuff.
Updates #12614
Change-Id: I35d2479ddd1d39b615bab32b1fa940ae8cbf9b11
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It has nothing to do with logtail and is confusing named like that.
Updates #cleanup
Updates #17323
Change-Id: Idd34587ba186a2416725f72ffc4c5778b0b9db4a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
On platforms that are causing EPIPE at a high frequency this is
resulting in non-working connections, for example when Apple decides to
forcefully close UDP sockets due to an unsoliced packet rejection in the
firewall.
Too frequent rebinds cause a failure to solicit the endpoints triggering
the rebinds, that would normally happen via CallMeMaybe.
Updates #14551
Updates tailscale/corp#25648
Signed-off-by: James Tucker <james@tailscale.com>
PR #17258 extracted `derp.Server` into `derp/derpserver.Server`.
This followup patch adds the following cleanups:
1. Rename `derp_server*.go` files to `derpserver*.go` to match
the package name.
2. Rename the `derpserver.NewServer` constructor to `derpserver.New`
to reduce stuttering.
3. Remove the unnecessary `derpserver.Conn` type alias.
Updates #17257
Updates #cleanup
Signed-off-by: Simon Law <sfllaw@tailscale.com>
This exports a number of things from the derp (generic + client) package
to be used by the new derpserver package, as now used by cmd/derper.
And then enough other misc changes to lock in that cmd/tailscaled can
be configured to not bring in tailscale.com/client/local. (The webclient
in particular, even when disabled, was bringing it in, so that's now fixed)
Fixes#17257
Change-Id: I88b6c7958643fb54f386dd900bddf73d2d4d96d5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Help out the linker's dead code elimination.
Updates #12614
Change-Id: I6c13cb44d3250bf1e3a01ad393c637da4613affb
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
updates tailscale/corp#32600
A localAPI/cli call to reload-config can end up leaving magicsock's mutex
locked. We were missing an unlock for the early exit where there's no change in
the static endpoints when the disk-based config is loaded. This is not likely
the root cause of the linked issue - just noted during investigation.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
This commit does not change the order or meaning of any eventbus activity, it
only updates the way the plumbing is set up.
Updates #15160
Change-Id: I40c23b183c2a6a6ea3feec7767c8e5417019fc07
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
Instead of waiting for a designated subscription to close as a canary for the
bus being stopped, use the bus Client's own signal for closure added in #17118.
Updates #cleanup
Change-Id: I384ea39f3f1f6a030a6282356f7b5bdcdf8d7102
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
The Tracker was using direct callbacks to ipnlocal. This PR moves those
to be triggered via the eventbus.
Additionally, the eventbus is now closed on exit from tailscaled
explicitly, and health is now a SubSystem in tsd.
Updates #15160
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
Remove the need for the caller to hold on to and call an unregister
function. Both two callers (one real, one test) already have a context
they can use. Use context.AfterFunc instead. There are no observable
side effects from scheduling too late if the goroutine doesn't run sync.
Updates #17148
Change-Id: Ie697dae0e797494fa8ef27fbafa193bfe5ceb307
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This test ostensibly checks whether we record an error metric if a packet
is dropped because the network is down, but the network connectivity is
irrelevant -- the send error is actually because the arguments to Send()
are invalid:
RebindingUDPConn.WriteWireGuardBatchTo:
[unexpected] offset (0) != Geneve header length (8)
This patch changes the test so we try to send a valid packet, and we
verify this by sending it once before taking the network down. The new
error is:
magicsock: network down
which is what we're trying to test.
We then test sending an invalid payload as a separate test case.
Updates tailscale/corp#22075
Signed-off-by: Alex Chan <alexc@tailscale.com>
endpointState is used for tracking UDP direct connection candidate
addresses. If it contains a DERP addr, then direct connection path
discovery will always send a wasteful disco ping over it. Additionally,
CLI "tailscale ping" via peer relay will race over DERP, leading to a
misleading result if pong arrives via DERP first.
Disco pongs arriving via DERP never influence path selection. Disco
ping/pong via DERP only serves "tailscale ping" reporting.
Updates #17121
Signed-off-by: Jordan Whited <jordan@tailscale.com>
If the DERP queue is full, drop the oldest item first, rather than the
youngest, on the assumption that older data is more likely to be
unanswerable.
Updates tailscale/corp#31762
Signed-off-by: James Tucker <james@tailscale.com>
DERP writes go via TCP and the host OS will have plenty of buffer space.
We've observed in the wild with a backed up TCP socket kernel side
buffers of >2.4MB. The DERP internal queue being larger causes an
increase in the probability that the contents of the backbuffer are
"dead letters" - packets that were assumed to be lost.
A first step to improvement is to size this queue only large enough to
avoid some of the initial connect stall problem, but not large enough
that it is contributing in a substantial way to buffer bloat /
dead-letter retention.
Updates tailscale/corp#31762
Signed-off-by: James Tucker <james@tailscale.com>
I need a ringbuffer in the more traditional sense, one that has a notion
of item removal as well as tail loss on overrun. This implementation is
really a clearable log window, and is used as such where it is used.
Updates #cleanup
Updates tailscale/corp#31762
Signed-off-by: James Tucker <james@tailscale.com>
Expected when Peer Relay'ing via self. These disco messages never get
sealed, and never leave the process.
Updates tailscale/corp#30527
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Peer Relay is dependent on crypto routing, therefore crypto routing is
now mandatory.
Updates tailscale/corp#20732
Updates tailscale/corp#31083
Signed-off-by: Jordan Whited <jordan@tailscale.com>
This commit also extends the updateRelayServersSet unit tests to cover
onNodeViewsUpdate.
Fixestailscale/corp#31080
Signed-off-by: Jordan Whited <jordan@tailscale.com>
One of these tests highlighted a Geneve encap bug, which is also fixed
in this commit.
looksLikeInitMsg was passed a packet post Geneve header stripping with
slice offsets that had not been updated to account for the stripping.
Updates tailscale/corp#30903
Signed-off-by: Jordan Whited <jordan@tailscale.com>
In the components where an event bus is already plumbed through, remove the
exceptions that allow it to be omitted, and update all the tests that relied on
those workarounds execute properly.
This change applies only to the places where we're already using the bus; it
does not enforce the existence of a bus in other components (yet),
Updates #15160
Change-Id: Iebb92243caba82b5eb420c49fc3e089a77454f65
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
A trusted peer relay path is always better than an untrusted direct or
peer relay path.
Updates tailscale/corp#30412
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Brad Fitzpatrick
Jordan Whited
Alex Chan
James Tucker
Simon Law
Jonathan Nobels
M. J. Fromberger
Claus Lensbøl