A recent change (009d702adf) introduced a deadlock where the
/machine/update-health network request to report the client's health
status update to the control plane was moved to being synchronous
within the eventbus's pump machinery.
I started to instead make the health reporting be async, but then we
realized in the three years since we added that, it's barely been used
and doesn't pay for itself, for how many HTTP requests it makes.
Instead, delete it all and replace it with a c2n handler, which
provides much more helpful information.
Fixestailscale/corp#32952
Change-Id: I9e8a5458269ebfdda1c752d7bbb8af2780d71b04
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Saves 262 KB so far. I'm sure I missed some places, but shotizam says
these were the low hanging fruit.
Updates #12614
Change-Id: Ia31c01b454f627e6d0470229aae4e19d615e45e3
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
For debugging purposes, add a new C2N endpoint returning the current
netmap. Optionally, coordination server can send a new "candidate" map
response, which the client will generate a separate netmap for.
Coordination server can later compare two netmaps, detecting unexpected
changes to the client state.
Updates tailscale/corp#32095
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
I'd started to do this in the earlier ts_omit_server PR but
decided to split it into this separate PR.
Updates #17128
Change-Id: Ief8823a78d1f7bbb79e64a5cab30a7d0a5d6ff4b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This is step 4 of making syspolicy a build-time feature.
This adds a policyclient.Get() accessor to return the correct
implementation to use: either the real one, or the no-op one. (A third
type, a static one for testing, also exists, so in general a
policyclient.Client should be plumbed around and not always fetched
via policyclient.Get whenever possible, especially if tests need to use
alternate syspolicy)
Updates #16998
Updates #12614
Change-Id: Iaf19670744a596d5918acfa744f5db4564272978
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Step 4 of N. See earlier commits in the series (via the issue) for the
plan.
This adds the missing methods to policyclient.Client and then uses it
everywhere in ipn/ipnlocal and locks it in with a new dep test.
Still plenty of users of the global syspolicy elsewhere in the tree,
but this is a lot of them.
Updates #16998
Updates #12614
Change-Id: I25b136539ae1eedbcba80124de842970db0ca314
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This is step 2 of ~4, breaking up #14720 into reviewable chunks, with
the aim to make syspolicy be a build-time configurable feature.
Step 1 was #16984.
In this second step, the util/syspolicy/policyclient package is added
with the policyclient.Client interface. This is the interface that's
always present (regardless of build tags), and is what code around the
tree uses to ask syspolicy/MDM questions.
There are two implementations of policyclient.Client for now:
1) NoPolicyClient, which only returns default values.
2) the unexported, temporary 'globalSyspolicy', which is implemented
in terms of the global functions we wish to later eliminate.
This then starts to plumb around the policyclient.Client to most callers.
Future changes will plumb it more. When the last of the global func
callers are gone, then we can unexport the global functions and make a
proper policyclient.Client type and constructor in the syspolicy
package, removing the globalSyspolicy impl out of tsd.
The final change will sprinkle build tags in a few more places and
lock it in with dependency tests to make sure the dependencies don't
later creep back in.
Updates #16998
Updates #12614
Change-Id: Ib2c93d15c15c1f2b981464099177cd492d50391c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This is step 1 of ~3, breaking up #14720 into reviewable chunks, with
the aim to make syspolicy be a build-time configurable feature.
In this first (very noisy) step, all the syspolicy string key
constants move to a new constant-only (code-free) package. This will
make future steps more reviewable, without this movement noise.
There are no code or behavior changes here.
The future steps of this series can be seen in #14720: removing global
funcs from syspolicy resolution and using an interface that's plumbed
around instead. Then adding build tags.
Updates #12614
Change-Id: If73bf2c28b9c9b1a408fe868b0b6a25b03eeabd1
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The field must only be accessed while holding LocalBackend's mutex,
but there are two places where it's accessed without the mutex:
- (LocalBackend).MaybeClearAppConnector()
- handleC2NAppConnectorDomainRoutesGet()
Fixes#16123
Signed-off-by: Nick Khyl <nickk@tailscale.com>
If we previously knew of macaddresses of a node, and they
suddenly goes to zero, ignore them and return the previous
hardware addresses.
Updates tailscale/corp#25168
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
This pulls out the Wake-on-LAN (WoL) code out into its own package
(feature/wakeonlan) that registers itself with various new hooks
around tailscaled.
Then a new build tag (ts_omit_wakeonlan) causes the package to not
even be linked in the binary.
Ohter new packages include:
* feature: to just record which features are loaded. Future:
dependencies between features.
* feature/condregister: the package with all the build tags
that tailscaled, tsnet, and the Tailscale Xcode project
extension can empty (underscore) import to load features
as a function of the defined build tags.
Future commits will move of our "ts_omit_foo" build tags into this
style.
Updates #12614
Change-Id: I9c5378dafb1113b62b816aabef02714db3fc9c4a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This commit updates the return body of c2n endpoint /vip-services to keep hash generation logic on client side.
Updates tailscale/corp#24510
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* ipn,tailcfg: add VIPService struct and c2n to fetch them from client
Updates tailscale/corp#22743, tailscale/corp#22955
Signed-off-by: Naman Sood <mail@nsood.in>
* more review fixes
Signed-off-by: Naman Sood <mail@nsood.in>
* don't mention PeerCapabilityServicesDestination since it's currently unused
Signed-off-by: Naman Sood <mail@nsood.in>
---------
Signed-off-by: Naman Sood <mail@nsood.in>
Perhaps I was too opimistic in #13323 thinking we won't need logs for
this. Let's log a summary of the response without logging specific
identifiers.
Updates tailscale/corp#24437
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
If the client cannot fetch a serial number, write a log message helping
the user understand what happened. Also, don't just return the error
immediately, since we still have a chance to collect network interface
addresses.
Updates #5902
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
If an optional `hwaddrs` URL parameter is present, add network interface
hardware addresses to the posture identity response.
Just like with serial numbers, this requires client opt-in via MDM or
`tailscale set --posture-checking=true`
(https://tailscale.com/kb/1326/device-identity)
Updates tailscale/corp#21371
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
We added a workaround for --wait, but didn't confirm the other flags,
which were added in systemd 235 and 236. Check systemd version for
deciding when to set all 3 flags.
Fixes#12136
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
While `clientupdate.Updater` won't be able to apply updates on macsys,
we use `clientupdate.CanAutoUpdate` to gate the EditPrefs endpoint in
localAPI. We should allow the GUI client to set AutoUpdate.Apply on
macsys for it to properly get reported to the control plane. This also
allows the tailnet-wide default for auto-updates to propagate to macsys
clients.
Updates https://github.com/tailscale/corp/issues/21339
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
When the client is disconnected from control for any reason (typically
just turned off), we should still attempt to update if auto-updates are
enabled. This may help users who turn tailscale on infrequently for
accessing resources.
RELNOTE: Apply auto-updates even if the node is down or disconnected
from the coordination server.
Updates #12117
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
The `--wait` flag for `systemd-run` was added in systemd 232. While it
is quite old, it doesn't hurt to special-case them and skip the `--wait`
flag. The consequence is that we lose the update command output in logs,
but at least auto-updates will work.
Fixes#12136
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Since we already track active SSH connections, it's not hard to
proactively reject updates until those finish. We attempt to do the same
on the control side, but the detection latency for new connections is in
the minutes, which is not fast enough for common short sessions.
Handle a `force=true` query parameter to override this behavior, so that
control can still trigger an update on a server where some long-running
abandoned SSH session is open.
Updates https://github.com/tailscale/corp/issues/18556
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
When auto-update setting in local Prefs is unset, apply the tailnet
default value from control. This only happens once, when we apply the
default (or when the user manually overrides it), tailnet default no
longer affects the node.
Updates #16244
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
So the control plane can delete TXT records more aggressively
after client's done with ACME fetch.
Updates tailscale/corp#15848
Change-Id: I4f1140305bee11ee3eee93d4fec3aef2bd6c5a7e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
When we run tailscled under systemd, restarting the unit kills all child
processes, including "tailscale update". And during update, the package
manager will restart the tailscaled unit. Specifically on Debian-based
distros, interrupting `apt-get install` can get the system into a wedged
state which requires the user to manually run `dpkg --configure` to
recover.
To avoid all this, use `systemd-run` where available to run the
`tailscale update` process. This launches it in a separate temporary
unit and doesn't kill it when parent unit is restarted.
Also, detect when `apt-get install` complains about aborted update and
try to restore the system by running `dpkg --configure tailscale`. This
could help if the system unexpectedly shuts down during our auto-update.
Fixes https://github.com/tailscale/corp/issues/15771
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Use the `qpkg_cli` to check for updates and install them. There are a
couple special things about this compare to other updaters:
* qpkg_cli can tell you when upgrade is available, but not what the
version is
* qpkg_cli --add Tailscale works for new installs, upgrades and
reinstalling existing version; even reinstall of existing version
takes a while
Updates #10178
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
The c2n part was broken because we were not looking up the tailscale
binary for that GOOS. The rest of the update was failing at the `pkg
upgrade` confirmation prompt. We also need to manually restart
tailscaled after update.
Updates #cleanup
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This change introduces a c2n endpoint that returns a map of domains to a
slice of resolved IP addresses for the domain.
Fixestailscale/corp#15657
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
clientupdate.Updater will have a non-nil Update func in a few cases
where it doesn't actually perform an update:
* on Arch-like distros, where it prints instructions on how to update
* on macOS app store version, where it opens the app store page
Add a new clientupdate.Arguments field to cause NewUpdater to fail when
we hit one of these cases. This results in c2n updates being "not
supported" and `tailscale set --auto-update` returning an error.
Updates #755
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Two bug fixes:
1. when tailscale update is executed as root, `os.UserCacheDir` may
return an error because `$XDG_CACHE_HOME` and `$HOME` are not set;
fallback to `os.TempDir` in those cases
2. on some weird distros (like my EndeavourOS), `/usr/sbin` is just a
symlink to `/usr/bin`; when we resolve `tailscale` binary path from
`tailscaled`, allow `tailscaled` to be in either directory
Updates #755
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
The Sparkle-based update is not quite working yet. Make `NewUpdater`
return `ErrUnsupported` for it to avoid the proliferation of exceptions
up the stack.
Updates #755
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This commit changes the PostureChecking syspolicy key to be a
PreferenceOption(user-defined, always, never) instead of Bool.
This aligns better with the defaults implementation on macOS allowing
CLI arguments to be read when user-defined or no defaults is set.
Updates #tailscale/tailscale/5902
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
This commit adds support for getting serial numbers from SMBIOS
on Windows/Linux (and BSD) using go-smbios.
Updates #5902
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
This optionally uploads MAC address(es) to control, then adds a
c2n handler so control can ask a node to send a WoL packet.
Updates #306
RELNOTE=now supports waking up peer nodes on your LAN via Wake-on-LAN packets
Change-Id: Ibea1275fcd2048dc61d7059039abfbaf1ad4f465
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Log some progress info to make updates more debuggable. Also, track
whether an active update is already started and return an error if
a concurrent update is attempted.
Some planned future PRs:
* add JSON output to `tailscale update`
* use JSON output from `tailscale update` to provide a more detailed
status of in-progress update (stage, download progress, etc)
Updates #6907
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
The flags are hidden for now. Adding propagation to tailscaled and
persistence only. The prefs field is wrapped in a struct to allow for
future expansion (like update schedule).
Updates #6907
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Brad Fitzpatrick
Anton Tolchanov
Juan Francisco Cantero Hurtado
Nick Khyl
Kristoffer Dalby
KevinLiang10
Naman Sood
Andrew Lytvynov
Percy Wegmann
Sonia Appasamy
Charlotte Brandhorst-Satzkorn