DNS configuration support to ProxyClass, allowing users to customize DNS resolution for Tailscale proxy pods.
Fixes#16886
Signed-off-by: Raj Singh <raj@tailscale.com>
This commit modifies the `DNSConfig` custom resource to allow specifying
a replica count when deploying a nameserver. This allows deploying
nameservers in a HA configuration.
Updates https://github.com/tailscale/corp/issues/32589
Signed-off-by: David Bond <davidsbond93@gmail.com>
This change adds full IPv6 support to the Kubernetes operator's DNS functionality,
enabling dual-stack and IPv6-only cluster support.
Fixes#16633
Signed-off-by: Raj Singh <raj@tailscale.com>
This commit adds a `replicas` field to the `Connector` custom resource that
allows users to specify the number of desired replicas deployed for their
connectors.
This allows users to deploy exit nodes, subnet routers and app connectors
in a highly available fashion.
Fixes#14020
Signed-off-by: David Bond <davidsbond93@gmail.com>
* cmd/k8s-operator,k8s-operator: allow setting a `priorityClassName`
Fixes#16682
Signed-off-by: Lee Briggs <lee@leebriggs.co.uk>
* Update k8s-operator/apis/v1alpha1/types_proxyclass.go
Co-authored-by: Tom Proctor <tomhjp@users.noreply.github.com>
Signed-off-by: Lee Briggs <jaxxstorm@users.noreply.github.com>
* run make kube-generate-all
Change-Id: I5f8f16694fdc181b048217b9f05ec2ee2aa04def
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
---------
Signed-off-by: Lee Briggs <lee@leebriggs.co.uk>
Signed-off-by: Lee Briggs <jaxxstorm@users.noreply.github.com>
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Co-authored-by: Tom Proctor <tomhjp@users.noreply.github.com>
This commit modifies the kubernetes operator's `DNSConfig` resource
with the addition of a new field at `nameserver.service.clusterIP`.
This field allows users to specify a static in-cluster IP address of
the nameserver when deployed.
Fixes#14305
Signed-off-by: David Bond <davidsbond93@gmail.com>
Adds a new reconciler for ProxyGroups of type kube-apiserver that will
provision a Tailscale Service for each replica to advertise. Adds two
new condition types to the ProxyGroup, TailscaleServiceValid and
TailscaleServiceConfigured, to post updates on the state of that
reconciler in a way that's consistent with the service-pg reconciler.
The created Tailscale Service name is configurable via a new ProxyGroup
field spec.kubeAPISserver.ServiceName, which expects a string of the
form "svc:<dns-label>".
Lots of supporting changes were needed to implement this in a way that's
consistent with other operator workflows, including:
* Pulled containerboot's ensureServicesUnadvertised and certManager into
kube/ libraries to be shared with k8s-proxy. Use those in k8s-proxy to
aid Service cert sharing between replicas and graceful Service shutdown.
* For certManager, add an initial wait to the cert loop to wait until
the domain appears in the devices's netmap to avoid a guaranteed error
on the first issue attempt when it's quick to start.
* Made several methods in ingress-for-pg.go and svc-for-pg.go into
functions to share with the new reconciler
* Added a Resource struct to the owner refs stored in Tailscale Service
annotations to be able to distinguish between Ingress- and ProxyGroup-
based Services that need cleaning up in the Tailscale API.
* Added a ListVIPServices method to the internal tailscale client to aid
cleaning up orphaned Services
* Support for reading config from a kube Secret, and partial support for
config reloading, to prevent us having to force Pod restarts when
config changes.
* Fixed up the zap logger so it's possible to set debug log level.
Updates #13358
Change-Id: Ia9607441157dd91fb9b6ecbc318eecbef446e116
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Adds a new k8s-proxy command to convert operator's in-process proxy to
a separately deployable type of ProxyGroup: kube-apiserver. k8s-proxy
reads in a new config file written by the operator, modelled on tailscaled's
conffile but with some modifications to ensure multiple versions of the
config can co-exist within a file. This should make it much easier to
support reading that config file from a Kube Secret with a stable file name.
To avoid needing to give the operator ClusterRole{,Binding} permissions,
the helm chart now optionally deploys a new static ServiceAccount for
the API Server proxy to use if in auth mode.
Proxies deployed by kube-apiserver ProxyGroups currently work the same as
the operator's in-process proxy. They do not yet leverage Tailscale Services
for presenting a single HA DNS name.
Updates #13358
Change-Id: Ib6ead69b2173c5e1929f3c13fb48a9a5362195d8
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Refactors setting status into its own top-level function to make it
easier to ensure we _always_ set the status if it's changed on every
reconcile. Previously, it was possible to have stale status if some
earlier part of the provision logic failed.
Updates #16327
Change-Id: Idab0cfc15ae426cf6914a82f0d37a5cc7845236b
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Adds Recorder fields to configure the name and annotations of the ServiceAccount
created for and used by its associated StatefulSet. This allows the created Pod
to authenticate with AWS without requiring a Secret with static credentials,
using AWS' IAM Roles for Service Accounts feature, documented here:
https://docs.aws.amazon.com/eks/latest/userguide/iam-roles-for-service-accounts.htmlFixes#15875
Change-Id: Ib0e15c0dbc357efa4be260e9ae5077bacdcb264f
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
This change introduces an Age column in the output for all custom
resources to enhance visibility into their lifecycle status.
Fixes#15499
Signed-off-by: satyampsoni <satyampsoni@gmail.com>
Re-enable HA Ingress again that was disabled for 1.82 release.
This reverts commit fea74a60d5.
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Temporarily make sure that the HA Ingress reconciler does not run,
as we do not want to release this to stable just yet.
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
cmd/k8s-operator,k8s-operator: allow using LE staging endpoint for Ingress
Allow to optionally use LetsEncrypt staging endpoint to issue
certs for Ingress/HA Ingress, so that it is easier to
experiment with initial Ingress setup without hiting rate limits.
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
This change:
- reinstates the HA Ingress controller that was disabled for 1.80 release
- fixes the API calls to manage VIPServices as the API was changed
- triggers the HA Ingress reconciler on ProxyGroup changes
Updates tailscale/tailscale#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
The HA Ingress functionality is not actually doing anything
valuable yet, so don't run the controller in 1.80 release yet.
Updates tailscale/tailscale#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/k8s-operator,k8s-operator: allow users to set custom labels for the optional ServiceMonitor
Updates tailscale/tailscale#14381
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Currently this does not yet do anything apart from creating
the ProxyGroup resources like StatefulSet.
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/k8s-operator,k8s-operator,go.mod: optionally create ServiceMonitor
Adds a new spec.metrics.serviceMonitor field to ProxyClass.
If that's set to true (and metrics are enabled), the operator
will create a Prometheus ServiceMonitor for each proxy to which
the ProxyClass applies.
Additionally, create a metrics Service for each proxy that has
metrics enabled.
Updates tailscale/tailscale#11292
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
We were previously relying on unintended behaviour by runc where
all containers where by default given read/write/mknod permissions
for tun devices.
This behaviour was removed in https://github.com/opencontainers/runc/pull/3468
and released in runc 1.2.
Containerd container runtime, used by Docker and majority of Kubernetes distributions
bumped runc to 1.2 in 1.7.24 https://github.com/containerd/containerd/releases/tag/v1.7.24
thus breaking our reference tun mode Tailscale Kubernetes manifests and Kubernetes
operator proxies.
This PR changes the all Kubernetes container configs that run Tailscale in tun mode
to privileged. This should not be a breaking change because all these containers would
run in a Pod that already has a privileged init container.
Updates tailscale/tailscale#14256
Updates tailscale/tailscale#10814
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
containerboot:
Adds 3 new environment variables for containerboot, `TS_LOCAL_ADDR_PORT` (default
`"${POD_IP}:9002"`), `TS_METRICS_ENABLED` (default `false`), and `TS_DEBUG_ADDR_PORT`
(default `""`), to configure metrics and debug endpoints. In a follow-up PR, the
health check endpoint will be updated to use the `TS_LOCAL_ADDR_PORT` if
`TS_HEALTHCHECK_ADDR_PORT` hasn't been set.
Users previously only had access to internal debug metrics (which are unstable
and not recommended) via passing the `--debug` flag to tailscaled, but can now
set `TS_METRICS_ENABLED=true` to expose the stable metrics documented at
https://tailscale.com/kb/1482/client-metrics at `/metrics` on the addr/port
specified by `TS_LOCAL_ADDR_PORT`.
Users can also now configure a debug endpoint more directly via the
`TS_DEBUG_ADDR_PORT` environment variable. This is not recommended for production
use, but exposes an internal set of debug metrics and pprof endpoints.
operator:
The `ProxyClass` CRD's `.spec.metrics.enable` field now enables serving the
stable user metrics documented at https://tailscale.com/kb/1482/client-metrics
at `/metrics` on the same "metrics" container port that debug metrics were
previously served on. To smooth the transition for anyone relying on the way the
operator previously consumed this field, we also _temporarily_ serve tailscaled's
internal debug metrics on the same `/debug/metrics` path as before, until 1.82.0
when debug metrics will be turned off by default even if `.spec.metrics.enable`
is set. At that point, anyone who wishes to continue using the internal debug
metrics (not recommended) will need to set the new `ProxyClass` field
`.spec.statefulSet.pod.tailscaleContainer.debug.enable`.
Users who wish to opt out of the transitional behaviour, where enabling
`.spec.metrics.enable` also enables debug metrics, can set
`.spec.statefulSet.pod.tailscaleContainer.debug.enable` to false (recommended).
Separately but related, the operator will no longer specify a host port for the
"metrics" container port definition. This caused scheduling conflicts when k8s
needs to schedule more than one proxy per node, and was not necessary for allowing
the pod's port to be exposed to prometheus scrapers.
Updates #11292
---------
Co-authored-by: Kristoffer Dalby <kristoffer@tailscale.com>
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Now when we have HA for egress proxies, it makes sense to support topology
spread constraints that would allow users to define more complex
topologies of how proxy Pods need to be deployed in relation with other
Pods/across regions etc.
Updates tailscale/tailscale#13406
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
The default ProxyClass can be set via helm chart or env var, and applies
to all proxies that do not otherwise have an explicit ProxyClass set.
This ensures proxies created by the new ProxyGroup CRD are consistent
with the behaviour of existing proxies
Nearby but unrelated changes:
* Fix up double error logs (controller runtime logs returned errors)
* Fix a couple of variable names
Updates #13406
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Implements the controller for the new ProxyGroup CRD, designed for
running proxies in a high availability configuration. Each proxy gets
its own config and state Secret, and its own tailscale node ID.
We are currently mounting all of the config secrets into the container,
but will stop mounting them and instead read them directly from the kube
API once #13578 is implemented.
Updates #13406
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
The ProxyGroup CRD specifies a set of N pods which will each be a
tailnet device, and will have M different ingress or egress services
mapped onto them. It is the mechanism for specifying how highly
available proxies need to be. This commit only adds the definition, no
controller loop, and so it is not currently functional.
This commit also splits out TailnetDevice and RecorderTailnetDevice
into separate structs because the URL field is specific to recorders,
but we want a more generic struct for use in the ProxyGroup status field.
Updates #13406
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
cmd/k8s-operator,k8s-operator,kube: Add TSRecorder CRD + controller
Deploys tsrecorder images to the operator's cluster. S3 storage is
configured via environment variables from a k8s Secret. Currently
only supports a single tsrecorder replica, but I've tried to take early
steps towards supporting multiple replicas by e.g. having a separate
secret for auth and state storage.
Example CR:
```yaml
apiVersion: tailscale.com/v1alpha1
kind: Recorder
metadata:
name: rec
spec:
enableUI: true
```
Updates #13298
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Adds a new TailscaleProxyReady condition type for use in corev1.Service
conditions.
Also switch our CRDs to use metav1.Condition instead of
ConnectorCondition. The Go structs are seralized identically, but it
updates some descriptions and validation rules. Update k8s
controller-tools and controller-runtime deps to fix the documentation
generation for metav1.Condition so that it excludes comments and
TODOs.
Stop expecting the fake client to populate TypeMeta in tests. See
kubernetes-sigs/controller-runtime#2633 for details of the change.
Finally, make some minor improvements to validation for service hostnames.
Fixes#12216
Co-authored-by: Irbe Krumina <irbe@tailscale.com>
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Add a new .spec.tailscale.acceptRoutes field to ProxyClass,
that can be optionally set to true for the proxies to
accept routes advertized by other nodes on tailnet (equivalent of
setting --accept-routes to true).
Updates tailscale/tailscale#12322,tailscale/tailscale#10684
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Also removes hardcoded image repo/tag from example DNSConfig resource
as the operator now knows how to default those.
Updates tailscale/tailscale#11019
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Add new fields TailnetIPs and Hostname to Connector Status. These
contain the addresses of the Tailscale node that the operator created
for the Connector to aid debugging.
Fixes#12214
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
cmd/k8s-operator,k8s-operator,go.{mod,sum}: make individual proxy images/image pull policies configurable
Allow to configure images and image pull policies for individual proxies
via ProxyClass.Spec.StatefulSet.Pod.{TailscaleContainer,TailscaleInitContainer}.Image,
and ProxyClass.Spec.StatefulSet.Pod.{TailscaleContainer,TailscaleInitContainer}.ImagePullPolicy
fields.
Document that we have images in ghcr.io on the relevant Helm chart fields.
Updates tailscale/tailscale#11675
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
cmd/k8s-operator: optionally update dnsrecords Configmap with DNS records for proxies.
This commit adds functionality to automatically populate
DNS records for the in-cluster ts.net nameserver
to allow cluster workloads to resolve MagicDNS names
associated with operator's proxies.
The records are created as follows:
* For tailscale Ingress proxies there will be
a record mapping the MagicDNS name of the Ingress
device and each proxy Pod's IP address.
* For cluster egress proxies, configured via
tailscale.com/tailnet-fqdn annotation, there will be
a record for each proxy Pod, mapping
the MagicDNS name of the exposed
tailnet workload to the proxy Pod's IP.
No records will be created for any other proxy types.
Records will only be created if users have configured
the operator to deploy an in-cluster ts.net nameserver
by applying tailscale.com/v1alpha1.DNSConfig.
It is user's responsibility to add the ts.net nameserver
as a stub nameserver for ts.net DNS names.
https://kubernetes.io/docs/tasks/administer-cluster/dns-custom-nameservers/#configuration-of-stub-domain-and-upstream-nameserver-using-corednshttps://cloud.google.com/kubernetes-engine/docs/how-to/kube-dns#upstream_nameservers
See also https://github.com/tailscale/tailscale/pull/11017
Updates tailscale/tailscale#10499
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/k8s-nameserver,k8s-operator: add a nameserver that can resolve ts.net DNS names in cluster.
Adds a simple nameserver that can respond to A record queries for ts.net DNS names.
It can respond to queries from in-memory records, populated from a ConfigMap
mounted at /config. It dynamically updates its records as the ConfigMap
contents changes.
It will respond with NXDOMAIN to queries for any other record types
(AAAA to be implemented in the future).
It can respond to queries over UDP or TCP. It runs a miekg/dns
DNS server with a single registered handler for ts.net domain names.
Queries for other domain names will be refused.
The intended use of this is:
1) to allow non-tailnet cluster workloads to talk to HTTPS tailnet
services exposed via Tailscale operator egress over HTTPS
2) to allow non-tailnet cluster workloads to talk to workloads in
the same cluster that have been exposed to tailnet over their
MagicDNS names but on their cluster IPs.
DNSConfig CRD can be used to configure
the operator to deploy kube nameserver (./cmd/k8s-nameserver) to cluster.
Updates tailscale/tailscale#10499
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Adds a new .spec.metrics field to ProxyClass to allow users to optionally serve
client metrics (tailscaled --debug) on <Pod-IP>:9001.
Metrics cannot currently be enabled for proxies that egress traffic to tailnet
and for Ingress proxies with tailscale.com/experimental-forward-cluster-traffic-via-ingress annotation
(because they currently forward all cluster traffic to their respective backends).
The assumption is that users will want to have these metrics enabled
continuously to be able to monitor proxy behaviour (as opposed to enabling
them temporarily for debugging). Hence we expose them on Pod IP to make it
easier to consume them i.e via Prometheus PodMonitor.
Updates tailscale/tailscale#11292
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Adds new ProxyClass.spec.statefulSet.pod.{tailscaleContainer,tailscaleInitContainer}.Env field
that allow users to provide key, value pairs that will be set as env vars for the respective containers.
Allow overriding all containerboot env vars,
but warn that this is not supported and might break (in docs + a warning when validating ProxyClass).
Updates tailscale/tailscale#10709
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/k8s-nameserver,k8s-operator: add a nameserver that can resolve ts.net DNS names in cluster.
Adds a simple nameserver that can respond to A record queries for ts.net DNS names.
It can respond to queries from in-memory records, populated from a ConfigMap
mounted at /config. It dynamically updates its records as the ConfigMap
contents changes.
It will respond with NXDOMAIN to queries for any other record types
(AAAA to be implemented in the future).
It can respond to queries over UDP or TCP. It runs a miekg/dns
DNS server with a single registered handler for ts.net domain names.
Queries for other domain names will be refused.
The intended use of this is:
1) to allow non-tailnet cluster workloads to talk to HTTPS tailnet
services exposed via Tailscale operator egress over HTTPS
2) to allow non-tailnet cluster workloads to talk to workloads in
the same cluster that have been exposed to tailnet over their
MagicDNS names but on their cluster IPs.
Updates tailscale/tailscale#10499
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/k8s-operator/deploy/crds,k8s-operator: add DNSConfig CustomResource Definition
DNSConfig CRD can be used to configure
the operator to deploy kube nameserver (./cmd/k8s-nameserver) to cluster.
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/k8s-operator,k8s-operator: optionally reconcile nameserver resources
Adds a new reconciler that reconciles DNSConfig resources.
If a DNSConfig is deployed to cluster,
the reconciler creates kube nameserver resources.
This reconciler is only responsible for creating
nameserver resources and not for populating nameserver's records.
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/{k8s-operator,k8s-nameserver}: generate DNSConfig CRD for charts, append to static manifests
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
---------
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/k8s-operator,k8s-operator: introduce proxy configuration mechanism via ProxyClass custom resource.
ProxyClass custom resource can be used to specify customizations
for the proxy resources created by the operator.
Add a reconciler that validates ProxyClass resources
and sets a Ready condition to True or False with a corresponding reason and message.
This is required because some fields (labels and annotations)
require complex validations that cannot be performed at custom resource apply time.
Reconcilers that use the ProxyClass to configure proxy resources are expected to
verify that the ProxyClass is Ready and not proceed with resource creation
if configuration from a ProxyClass that is not yet Ready is required.
If a tailscale ingress/egress Service is annotated with a tailscale.com/proxy-class annotation, look up the corresponding ProxyClass and, if it is Ready, apply the configuration from the ProxyClass to the proxy's StatefulSet.
If a tailscale Ingress has a tailscale.com/proxy-class annotation
and the referenced ProxyClass custom resource is available and Ready,
apply configuration from the ProxyClass to the proxy resources
that will be created for the Ingress.
Add a new .proxyClass field to the Connector spec.
If connector.spec.proxyClass is set to a ProxyClass that is available and Ready,
apply configuration from the ProxyClass to the proxy resources created for the Connector.
Ensure that when Helm chart is packaged, the ProxyClass yaml is added to chart templates. Ensure that static manifest generator adds ProxyClass yaml to operator.yaml. Regenerate operator.yaml
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
cmd/k8s-operator/deploy/crds,k8s-operator/apis/v1alpha1: allow to define an exit node via Connector CR.
Make it possible to define an exit node to be deployed to a Kubernetes cluster
via Connector Custom resource.
Also changes to Connector API so that one Connector corresponds
to one Tailnet node that can be either a subnet router or an exit
node or both.
The Kubernetes operator parses Connector custom resource and,
if .spec.isExitNode is set, configures that Tailscale node deployed
for that connector as an exit node.
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Co-authored-by: Anton Tolchanov <anton@tailscale.com>
* k8s-operator,cmd/k8s-operator,Makefile,scripts,.github/workflows: add Connector kube CRD.
Connector CRD allows users to configure the Tailscale Kubernetes operator
to deploy a subnet router to expose cluster CIDRs or
other CIDRs available from within the cluster
to their tailnet.
Also adds various CRD related machinery to
generate CRD YAML, deep copy implementations etc.
Engineers will now have to run
'make kube-generate-all` after changing kube files
to ensure that all generated files are up to date.
* cmd/k8s-operator,k8s-operator: reconcile Connector resources
Reconcile Connector resources, create/delete subnetrouter resources in response to changes to Connector(s).
Connector reconciler will not be started unless
ENABLE_CONNECTOR env var is set to true.
This means that users who don't want to use the alpha
Connector custom resource don't have to install the Connector
CRD to their cluster.
For users who do want to use it the flow is:
- install the CRD
- install the operator (via Helm chart or using static manifests).
For Helm users set .values.enableConnector to true, for static
manifest users, set ENABLE_CONNECTOR to true in the static manifest.
Updates tailscale/tailscale#502
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Raj Singh
David Bond
Lee Briggs
Tom Proctor
Tom Meadows
Satyam Soni
Irbe Krumina
Cameron Stokes