Previously tstun.Wrapper.SetWGConfig walked wgcfg.Config.Peers on every
netmap to rebuild its own IP-to-peer table for masquerade NAT rewrites
and jailed-peer classification. Now the tun layer instead consumes the
route manager's shared immutable outbound snapshot directly, via a new
Engine.SetPeerRoutes method: LocalBackend pushes the snapshot (plus this
node's native Tailscale addresses) after every route manager commit that
can change it, and per-packet lookups read the interned PeerRoute
attributes from that table.
When no current peer is jailed or masqueraded, LocalBackend installs a
nil table (gated on RouteManager.HasDataPlaneAttrs), preserving the
per-packet nil-check fast path. The exitNodeRequiresMasq machinery is
deleted: its purpose was populating the table with all peers so that
more-specific entries shadow an exit node's /0, and the always-full
route manager table gives that shadowing inherently.
This is the last step before removing the Peers field from wgcfg.Config.
Updates #12542
Change-Id: Ifce09ca929a3f2511303ca1d6efdd583739494ce
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This reverts commit 468a7f4973 on request to @ChaosInTheCRD
Although passing all our CI checks, @ChaosInTheCRD would like to plan manual testing as part of incorporating these updates.
Updates #cleanup
Change-Id: I3f007b571b884c9538a97ac5d3ded782bcba2347
Signed-off-by: Mike Jensen <mikej@tailscale.com>
Give nodeBackend a RouteManager and keep it in sync as routing
inputs change: full netmaps resync the whole peer set (removals plus
no-op-cheap upserts), incremental netmap deltas mirror their peer
upserts and removes into the same mutation batch, and
authReconfigLocked pushes the routing-relevant prefs (exit node,
subnet route acceptance, OneCGNAT) after resolving the exit node's
stable ID to its current numeric node ID.
A selected exit node that doesn't resolve to a current peer (a
nonexistent node, or MDM's "auto:any" placeholder awaiting
resolution) is not the same as no exit node: per the long-standing
ipn.Prefs.ExitNodeID contract, it blackholes internet traffic rather
than letting it escape to the local network. RouteManager's Prefs
gains an ExitNodeSelected bit so its OS route set keeps the default
routes in that case, with no outbound peer to carry them, matching
what routerConfigLocked does today, as pinned by TestRouterConfigExitNodeBlackhole in the previous commit.
All mutations happen with nodeBackend.mu held, satisfying the
RouteManager's serialized Begin/Commit contract.
Nothing consumes its snapshots yet; the wgengine data plane and OS
router wiring come next.
Updates #12542
Change-Id: I677b6b2c9efb8e41b3d27071bd9db73e01640d3b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This reverts commit ca9f6971e5.
The dependency updates broke the K8s E2E tests. Reverting so the
updates can be re-landed with the tests passing.
flake.nix, shell.nix, and flakehashes.json were regenerated with
tool/updateflakes rather than reverted, since a later commit
(6fdffd9e5) also updated them for the gowebdav bump.
Change-Id: Id4afd7788d305a674841168e2a66a0009212ffd3
Signed-off-by: Fernando Serboncini <fserb@tailscale.com>
wgcfg.Config.NetworkLogging carried the network flow logging identity
inside the WireGuard config, where it was unrelated to WireGuard; it
lived there mainly so that identity changes would defeat Reconfig's
ErrNoChanges check and reach the netlog startup/shutdown logic.
Remove the field and move the whole netlog lifecycle into a new
feature/netlog package, installed on the engine via the new
wgengine.HookNewNetLogger hook, like other feature/* packages. The
logging identity now comes from LocalBackend's current netmap via the
widened NetLogSource interface (replacing Engine.SetNetLogNodeSource),
so nmcfg no longer parses audit log IDs into the config. The engine
still calls the hook before its ErrNoChanges return and before
router.Set (to capture initial packets), and again after router.Set
(to capture final packets), preserving the previous ordering.
Core wgengine no longer imports wgengine/netlog, so minimal builds
drop it entirely. tailscaled keeps netlog via feature/condregister,
and tsnet imports feature/condregister/netlog explicitly to keep
netlog enabled by default in tsnet-based binaries (tsidp,
k8s-operator).
This is pulled out of a future change that removes wgcfg.Config.Peers,
to make that PR smaller.
Updates #12542
Updates #12614
Change-Id: I41ca7dfe43c51e977c41b5f8e934bd1f0e6e6e24
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Now that the routecheck subsystem is continuously collecting
reachability reports in the background, we can add a hook to
LocalBackend for fetching its report. That allows
suggestExitNodeUsingTrafficSteering to consult that report when
disqualifying candidates, instead of blocking on an immediate probe.
Exit node suggestions will only consult the report when the
`client-side-reachability` and `client-side-reachability-routecheck`
node attributes are both set on the current node.
Updates #17366
Updates tailscale/corp#33033
Signed-off-by: Simon Law <sfllaw@tailscale.com>
f5eac39ea ("feature/acme, ipn/ipnlocal: start moving ACME/cert state
into an extension") started to move the cert code into feature/acme
but was meant as a baby step.
This goes further, moving almost everything, leaving only some hooks
in ipnlocal.
When we later move "serve" support out to feature/serve, this will
look a bit different in that the hooks currently in ipnlocal will move
to feature/serve (cert support already depends on serve).
As part of this, cert-related tests move to feaure/acme too, which
means some test infra from ipnlocal now moves to shared ipnlocaltest.
(it's not big at the moment, but I imagine it growing)
Updates #12614
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I9ea89aa9754f12d54b81751b6bd830f2664241ff
This was missing in the earlier f5eac39ea7 and meant that tsnet users weren't
getting (all of) acme support.
Thanks to @ChaosInTheCRD and @BeckyPauley for debugging.
Updates #12614
Updates #20252
Change-Id: I176a7b179b2ad3726aca484057f0aae7cc3561c8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
tsdial.Dialer.SetNetMap rebuilt an O(n peers) map of MagicDNS names on
every netmap change. As we move toward per-peer incremental deltas,
this becomes quadratic. This removes it and replaces it with
SetResolveMagicDNS, a callback into LocalBackend that looks up
hostnames from nodeBackend's new nodeByName index (populated alongside
nodeByAddr/nodeByKey on both full and delta paths). The index stores
both FQDNs and short names as keys.
This is the same treatment applied to netlog (8f210454d), wglog
(988b0905b), and drive (1d6989408): stop pushing *netmap.NetworkMap
into subsystems and instead have them pull from LocalBackend's live
data via callbacks.
Updates #12542
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I24557ab0c8a27636e08e4779bcfd3ec633db0a78
When recommending an exit node, suggestExitNodeLocked ranks candidates by
the latency to their home DERP region, taken from the most recent netcheck
report. But netcheck alternates between full reports, which probe every
region, and incremental reports, which only re-probe the home region and a
handful of the fastest regions. When the most recent report is incremental,
the suggestion fell back to a random for exit nodes that are far away.
Now we rank candidates against the best recent latency, tracked by the
`netcheck.Client` - the same data that is used to pick the preferred
DERP. It uses a history of measurements which includes a full netcheck
report, so should cover all DERP regions.
Updates tailscale/corp#17516
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
The Logger previously took a *netmap.NetworkMap at Startup and on every
ReconfigNetworkMap call, denormalizing it into per-IP and self lookup
maps. That denormalization is O(n) over all peers and ran on every
netmap update, contributing to the broader quadratic behavior we want
to eliminate when a single peer is added or removed.
Instead, this makes netlog ask LocalBackend (well, nodeBackend) for
the info it needs, letting us remove the netmap.NetworkMap type
entirely from the netlog package.
This is a dependency to removing the netmap.NetworkMap type from
upstream callers, like wgengine.Engine in general.
Updates #12542
Change-Id: Ib5f2de96e788a667332c0a6f7ac833b3d0053b5c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
util/def: add def.Bool and def.Duration default parse helpers
Replace multiple instances of def.Bool and def.Duration with a new util/def
package.
Updates #20018
Co-authored-by: Bobby <boby@codelabs.co.id>
Co-authored-by: Simon Law <sfllaw@tailscale.com>
Signed-off-by: Bobby <boby@codelabs.co.id>
Signed-off-by: Simon Law <sfllaw@tailscale.com>
tsnet depends on logpolicy, which in turn depended on util/syspolicy
because of a single LogTarget policy setting it uses.
In this commit, we replace that dependency with a feature.Hook,
which only tailscaled or its platform-specific alternatives should set.
Updates #20031
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Introduce a new `tailscale routecheck` command which prints a report
of high-availability routers that are reachable.
This command rhymes with the `tailscale netcheck` command and but
instead of reporting on local network conditions, `routecheck` reports
on remote connectivity.
Updates #17366
Updates tailscale/corp#33033
Signed-off-by: Simon Law <sfllaw@tailscale.com>
In order to support a `tailscale routecheck` command, we introduce the
`/localapi/v0/routecheck` endpoint to the local API. This endpoint
returns the most recent report collected by the routecheck client.
If `force=true` is an argument in the query string, then this endpoint
will actively probe before returning the report.
Updates #17366
Updates tailscale/corp#33033
Signed-off-by: Simon Law <sfllaw@tailscale.com>
tailscale-client-go-v2 natively supports identity federation authentication,
and in #19010 the required authentication provider is used, but the manual
token exchange was never removed, so we were exchanging JWT token to an auth
token, and then were trying to use that auth token for exchange once again.
This commit removes the legacy mechanism, fully relying on
tailscale-client-go-v2 to handle authentication.
Fixes#19844
Signed-off-by: Artem Leshchev <matshch@avride.ai>
In PR tailscale/corp#30448, we originally decided to break ties using
SHA256 for our rendezvous hashing algorithm. Now that we’ve had some
experience with it, we think that FNV-1a is a better choice. It
distributes bits evenly, it’s much faster, and it doesn’t need to be
cryptographically secure. The FNV designers recommend FNV-1a over the
deprecated FNV-1.
This PR makes the switch and updates the related tests, since changing
the algorithm changes which stable pick gets selected. As of 2026-05,
this is the best time to make this change, since there are almost no
clients in the wild with traffic steering enabled.
Updates #17366
Updates tailscale/corp#29964
Updates tailscale/corp#29966
Updates tailscale/corp#33033
Signed-off-by: Simon Law <sfllaw@tailscale.com>
The traffic package contains helpers for evaluating traffic steering
scores and picking appropriate nodes. These were extracted from
ipnlocal.suggestExitNodeUsingTrafficSteering so they can be reused by
the new routecheck package to probe exit nodes in priority order.
Updates #17366
Updates tailscale/corp#33033
Signed-off-by: Simon Law <sfllaw@tailscale.com>
The tailscale.com/wif package brings in the AWS SDK
(github.com/aws/aws-sdk-go-v2/{config,sts,...} and github.com/aws/smithy-go)
to support fetching ID tokens from AWS IMDS for workload identity
federation. Until now, tsnet pulled this in unconditionally via
feature/condregister/identityfederation, costing ~70 unwanted deps for
every tsnet program whether or not it uses workload identity federation.
These AWS SDK deps were originally removed from tsnet on 2025-09-29 by
commit 69c79cb9f ("ipn/store, feature/condregister: move AWS + Kube
store registration to condregister"). They were then accidentally added
back on 2026-01-14 by commit 6a6aa805d ("cmd,feature: add identity
token auto generation for workload identity", PR #18373) when the new
wif package was wired into tsnet via feature/identityfederation.
Drop the blanket import. tsnet programs that want workload identity
federation now opt in with:
import _ "tailscale.com/feature/identityfederation"
The hook lookup in resolveAuthKey already uses GetOk and degrades
gracefully when the feature isn't linked, so existing programs that
don't use workload identity federation see no behavior change. The
tailscale CLI still imports the condregister wrapper directly, so its
behavior is also unchanged.
Lock this in with TestDeps additions: tailscale.com/wif as a BadDep,
plus substring checks in OnDep that fail on any github.com/aws/ or
k8s.io/ dependency creeping back in.
Also, switch cmd/gitops-pusher from the condregister wrapper to a
direct import of feature/identityfederation: gitops-pusher's auth flow
calls HookExchangeJWTForTokenViaWIF directly, so it shouldn't be
subject to the ts_omit_identityfederation build tag.
Updates #12614
Change-Id: I70599f2bdd4d3666b26a859d5b76caa5d6b94507
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
There are only a couple endpoints that check peer capabilities. Keeping
permission checks with the code that assumes they were performed, rather
than with the routing layer, feels easier to reason about.
Check that the caller is actually a peer and pass their capabilities via
a context value for handlers that want to check them.
Along with this, simplify the helper handler wrappers that are not
needed for most of the endpoints.
Updates #40851
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This drops an indirect dependency on the old github.com/docker/docker
(which was replaced with github.com/moby/moby) and fixes a couple recent
CVEs.
Updates #cleanup
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
fixestailscale/corp#39422
Updates tailscale/certstore for properly macOS support and
builds the request signing support into macOS builds. iOS and builds
that do not use cGo are omitted.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
This commit modifies the kubernetes operator to use the `tailscale-client-go-v2`
package instead of the internal tailscale client it was previously using. This
now gives us the ability to expand out custom resources and features as they
become available via the API module.
The tailnet reconciler has also been modified to manage clients as tailnets
are created and removed, providing each subsequent reconciler with a single
`ClientProvider` that obtains a tailscale client for the respective tailnet
by name, or the operator's default when presented with a blank string.
Fixes: https://github.com/tailscale/corp/issues/38418
Signed-off-by: David Bond <davidsbond93@gmail.com>
Replace byte-at-a-time ReadByte loops with Peek+Discard in the DERP
read path. Peek returns a slice into bufio's internal buffer without
allocating, and Discard advances the read pointer without copying.
Introduce util/bufiox with a BufferedReader interface and ReadFull
helper that uses Peek+copy+Discard as an allocation-free alternative
to io.ReadFull.
- derp.ReadFrameHeader: replace 5× ReadByte with Peek(5)+Discard(5),
reading the frame type and length directly from the peeked slice.
Remove now-unused readUint32 helper.
name old ns/op new ns/op speedup
ReadFrameHeader-8 24.2 12.4 ~2x
(0 allocs/op in both)
- key.NodePublic.ReadRawWithoutAllocating: replace 32× ReadByte with
bufiox.ReadFull. Addresses the "Dear future" comment about switching
away from byte-at-a-time reads once a non-escaping alternative exists.
name old ns/op new ns/op speedup
NodeReadRawWithoutAllocating-8 140 43.6 ~3.2x
(0 allocs/op in both)
- derpserver.handleFramePing: replace io.ReadFull with bufiox.ReadFull.
Updates tailscale/corp#38509
Signed-off-by: Mike O'Driscoll <mikeo@tailscale.com>
When a client starts up without being able to connect to control, it
sends its discoKey to other nodes it wants to communicate with over
TSMP. This disco key will be a newer key than the one control knows
about.
If the client that can connect to control gets a full netmap, ensure
that the disco key for the node not connected to control is not
overwritten with the stale key control knows about.
This is implemented through keeping track of mapSession and use that for
the discokey injection if it is available. This ensures that we are not
constantly resetting the wireguard connection when getting the wrong
keys from control.
This is implemented as:
- If the key is received via TSMP:
- Set lastSeen for the peer to now()
- Set online for the peer to false
- When processing new keys, only accept keys where either:
- Peer is online
- lastSeen is newer than existing last seen
If mapSession is not available, as in we are not yet connected to
control, punt down the disco key injection to magicsock.
Ideally, we will want to have mapSession be long lived at some point in
the near future so we only need to inject keys in one location and then
also use that for testing and loading the cache, but that is a yak for
another PR.
Updates #12639
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
This makes tsnet apps not depend on x/crypto/ssh and locks that in with a test.
It also paves the wave for tsnet apps to opt-in to SSH support via a
blank feature import in the future.
Updates #12614
Change-Id: Ica85628f89c8f015413b074f5001b82b27c953a9
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
After we intercept a DNS response and assign magic and transit addresses
we must communicate the assignment to our connector so that it can
direct traffic when it arrives.
Use the recently added peerapi endpoint to send the addresses.
Updates tailscale/corp#34258
Signed-off-by: Fran Bull <fran@tailscale.com>
considerable latency was seen when using k8s-proxy with ProxyGroup
in the kubernetes operator. Switching to L4 TCPForward solves this.
Fixes tailscale#18171
Signed-off-by: chaosinthecrd <tom@tmlabs.co.uk>
Co-authored-by: chaosinthecrd <tom@tmlabs.co.uk>
PR #18860 adds firewall rules in the mangle table to save outbound packet
marks to conntrack and restore them on reply packets before the routing
decision. When reply packets have their marks restored, the kernel uses
the correct routing table (based on the mark) and the packets pass the
rp_filter check.
This makes the risk check and reverse path filtering warnings unnecessary.
Updates #3310Fixestailscale/corp#37846
Signed-off-by: Mike O'Driscoll <mikeo@tailscale.com>
This commit implements a reconciler for the new `ProxyGroupPolicy`
custom resource. When created, all `ProxyGroupPolicy` resources
within the same namespace are merged into two `ValidatingAdmissionPolicy`
resources, one for egress and one for ingress.
These policies use CEL expressions to limit the usage of the
"tailscale.com/proxy-group" annotation on `Service` and `Ingress`
resources on create & update.
Included here is also a new e2e test that ensures that resources that
violate the policy return an error on creation, and that once the
policy is changed to allow them they can be created.
Closes: https://github.com/tailscale/corp/issues/36830
Signed-off-by: David Bond <davidsbond93@gmail.com>
This commit is based on ff0978ab, and extends #18497 to connect network map
caching to the LocalBackend. As implemented, only "whole" netmap values are
stored, and we do not yet handle incremental updates. As-written, the feature must
be explicitly enabled via the TS_USE_CACHED_NETMAP envknob, and must be
considered experimental.
Updates #12639
Co-Authored-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I48a1e92facfbf7fb3a8e67cff7f2c9ab4ed62c83
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
bart has gained a bunch of purported performance and usability
improvements since the current version we are using (0.18.0,
from 1y ago)
Updates tailscale/corp#36982
Signed-off-by: Amal Bansode <amal@tailscale.com>
This commit contains the implementation of multi-tailnet support within the Kubernetes Operator
Each of our custom resources now expose the `spec.tailnet` field. This field is a string that must match the name of an existing `Tailnet` resource. A `Tailnet` resource looks like this:
```yaml
apiVersion: tailscale.com/v1alpha1
kind: Tailnet
metadata:
name: example # This is the name that must be referenced by other resources
spec:
credentials:
secretName: example-oauth
```
Each `Tailnet` references a `Secret` resource that contains a set of oauth credentials. This secret must be created in the same namespace as the operator:
```yaml
apiVersion: v1
kind: Secret
metadata:
name: example-oauth # This is the name that's referenced by the Tailnet resource.
namespace: tailscale
stringData:
client_id: "client-id"
client_secret: "client-secret"
```
When created, the operator performs a basic check that the oauth client has access to all required scopes. This is done using read actions on devices, keys & services. While this doesn't capture a missing "write" permission, it catches completely missing permissions. Once this check passes, the `Tailnet` moves into a ready state and can be referenced. Attempting to use a `Tailnet` in a non-ready state will stall the deployment of `Connector`s, `ProxyGroup`s and `Recorder`s until the `Tailnet` becomes ready.
The `spec.tailnet` field informs the operator that a `Connector`, `ProxyGroup`, or `Recorder` must be given an auth key generated using the specified oauth client. For backwards compatibility, the set of credentials the operator is configured with are considered the default. That is, where `spec.tailnet` is not set, the resource will be deployed in the same tailnet as the operator.
Updates https://github.com/tailscale/corp/issues/34561
* cmd/k8s-operator/e2e: run self-contained e2e tests with devcontrol
Adds orchestration for more of the e2e testing setup requirements to
make it easier to run them in CI, but also run them locally in a way
that's consistent with CI. Requires running devcontrol, but otherwise
supports creating all the scaffolding required to exercise the operator
and proxies.
Updates tailscale/corp#32085
Change-Id: Ia7bff38af3801fd141ad17452aa5a68b7e724ca6
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
* cmd/k8s-operator/e2e: being more specific on tmp dir cleanup
Signed-off-by: chaosinthecrd <tom@tmlabs.co.uk>
---------
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Signed-off-by: chaosinthecrd <tom@tmlabs.co.uk>
Co-authored-by: chaosinthecrd <tom@tmlabs.co.uk>
Moves magicksock.cloudInfo into util/cloudinfo with minimal changes.
Updates #17796
Change-Id: I83f32473b9180074d5cdbf00fa31e5b3f579f189
Signed-off-by: Alex Valiushko <alexvaliushko@tailscale.com>
Adds cmd/cigocacher as the client to cigocached for Go caching over
HTTP. The HTTP cache is best-effort only, and builds will fall back to
disk-only cache if it's not available, much like regular builds.
Not yet used in CI; that will follow in another PR once we have runners
available in this repo with the right network setup for reaching
cigocached.
Updates tailscale/corp#10808
Change-Id: I13ae1a12450eb2a05bd9843f358474243989e967
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
This adds the --proxy-protocol flag to 'tailscale serve' and
'tailscale funnel', which tells the Tailscale client to prepend a PROXY
protocol[1] header when making connections to the proxied-to backend.
I've verified that this works with our existing funnel servers without
additional work, since they pass along source address information via
PeerAPI already.
Updates #7747
[1]: https://www.haproxy.org/download/1.8/doc/proxy-protocol.txt
Change-Id: I647c24d319375c1b33e995555a541b7615d2d203
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Brad FitzpatrickandBrad Fitzpatrick
Mike JensenandGitHub
Fernando SerbonciniandGitHub
Simon LawandSimon Law
Anton TolchanovandAnton Tolchanov
Nick KhylandNick Khyl
Artem LeshchevandGitHub
Andrew LytvynovandGitHub
Jonathan NobelsandGitHub
David BondandGitHub
Mike O'DriscollandGitHub
Claus LensbølandGitHub
Fran Bull
Amal BansodeandGitHub
Danni PopovaandGitHub
Patrick O'DohertyandGitHub
Andrew DunhamandAndrew Dunham
Alex ValiushkoandGitHub
Gesa StupperichandGesa Stupperich