A filesystem was plumbed into netstack in 993acf4475
but hasn't been used since 2d5d6f5403. Remove it.
Noticed while rebasing a Tailscale fork elsewhere.
Updates tailscale/corp#16827
Change-Id: Ib76deeda205ffe912b77a59b9d22853ebff42813
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This required sharing the dropped packet metric between two packages
(tstun and magicsock), so I've moved its definition to util/usermetric.
Updates tailscale/corp#22075
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
The user-facing metrics are intended to track data transmitted at
the overlay network level.
Updates tailscale/corp#22075
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
This adds additional logging on DERP home changes to allow
better troubleshooting.
Updates tailscale/corp#18095
Signed-off-by: Tim Walters <tim@tailscale.com>
While looking at deflaking TestTwoDevicePing/ping_1.0.0.2_via_SendPacket,
there were a bunch of distracting:
WARNING: (non-fatal) nil health.Tracker (being strict in CI): ...
This pacifies those so it's easier to work on actually deflaking the test.
Updates #11762
Updates #11874
Change-Id: I08dcb44511d4996b68d5f1ce5a2619b555a2a773
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
connstats currently increments the packet counter whenever it is called
to store a length of data, however when udp batch sending was introduced
we pass the length for a series of packages, and it is only incremented
ones, making it count wrongly if we are on a platform supporting udp
batches.
Updates tailscale/corp#22075
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
Like we do for the ones on iOS.
As a bonus, this removes a caller of tsaddr.IsTailscaleIP which we
want to revamp/remove soonish.
Updates #13687
Change-Id: Iab576a0c48e9005c7844ab52a0aba5ba343b750e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The AddSNATRuleForDst rule was adding a new rule each time it was called including:
- if a rule already existed
- if a rule matching the destination, but with different desired source already existed
This was causing issues especially for the in-progress egress HA proxies work,
where the rules are now refreshed more frequently, so more redundant rules
were being created.
This change:
- only creates the rule if it doesn't already exist
- if a rule for the same dst, but different source is found, delete it
- also ensures that egress proxies refresh firewall rules
if the node's tailnet IP changes
Updates tailscale/tailscale#13406
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
The new logging in 2dd71e64ac is spammy at shutdown:
Receive func ReceiveIPv6 exiting with error: *net.OpError, read udp [::]:38869: raw-read udp6 [::]:38869: use of closed network connection
Receive func ReceiveIPv4 exiting with error: *net.OpError, read udp 0.0.0.0:36123: raw-read udp4 0.0.0.0:36123: use of closed network connection
Skip it if we're in the process of shutting down.
Updates #10976
Change-Id: I4f6d1c68465557eb9ffe335d43d740e499ba9786
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
* cmd/containerboot,kube,util/linuxfw: configure kube egress proxies to route to 1+ tailnet targets
This commit is first part of the work to allow running multiple
replicas of the Kubernetes operator egress proxies per tailnet service +
to allow exposing multiple tailnet services via each proxy replica.
This expands the existing iptables/nftables-based proxy configuration
mechanism.
A proxy can now be configured to route to one or more tailnet targets
via a (mounted) config file that, for each tailnet target, specifies:
- the target's tailnet IP or FQDN
- mappings of container ports to which cluster workloads will send traffic to
tailnet target ports where the traffic should be forwarded.
Example configfile contents:
{
"some-svc": {"tailnetTarget":{"fqdn":"foo.tailnetxyz.ts.net","ports"{"tcp:4006:80":{"protocol":"tcp","matchPort":4006,"targetPort":80},"tcp:4007:443":{"protocol":"tcp","matchPort":4007,"targetPort":443}}}}
}
A proxy that is configured with this config file will configure firewall rules
to route cluster traffic to the tailnet targets. It will then watch the config file
for updates as well as monitor relevant netmap updates and reconfigure firewall
as needed.
This adds a bunch of new iptables/nftables functionality to make it easier to dynamically update
the firewall rules without needing to restart the proxy Pod as well as to make
it easier to debug/understand the rules:
- for iptables, each portmapping is a DNAT rule with a comment pointing
at the 'service',i.e:
-A PREROUTING ! -i tailscale0 -p tcp -m tcp --dport 4006 -m comment --comment "some-svc:tcp:4006 -> tcp:80" -j DNAT --to-destination 100.64.1.18:80
Additionally there is a SNAT rule for each tailnet target, to mask the source address.
- for nftables, a separate prerouting chain is created for each tailnet target
and all the portmapping rules are placed in that chain. This makes it easier
to look up rules and delete services when no longer needed.
(nftables allows hooking a custom chain to a prerouting hook, so no extra work
is needed to ensure that the rules in the service chains are evaluated).
The next steps will be to get the Kubernetes Operator to generate
the configfile and ensure it is mounted to the relevant proxy nodes.
Updates tailscale/tailscale#13406
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Like Linux, macOS will reply to sendto(2) with EPERM if the firewall is
currently blocking writes, though this behavior is like Linux
undocumented. This is often caused by a faulting network extension or
content filter from EDR software.
Updates #11710
Updates #12891
Updates #13511
Signed-off-by: James Tucker <james@tailscale.com>
When querying for an exit node suggestion, occasionally it triggers a
new report concurrently with an existing report in progress. Generally,
there should always be a recent report or one in progress, so it is
redundant to start one there, and it causes concurrency issues.
Fixes#12643
Change-Id: I66ab9003972f673e5d4416f40eccd7c6676272a5
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
this commit changes usermetrics to be non-global, this is a building
block for correct metrics if a go process runs multiple tsnets or
in tests.
Updates #13420
Updates tailscale/corp#22075
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
netcheck.Client.GetReport() applies its own deadlines. This 2s deadline
was causing GetReport() to never fall back to HTTPS/ICMP measurements
as it was shorter than netcheck.stunProbeTimeout, leaving no time
for fallbacks.
Updates #13394
Updates #6187
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Disable TCP & UDP GRO if the probe fails.
torvalds/linux@e269d79c7d35aa3808b1f3c1737d63dab504ddc8 broke virtio_net
TCP & UDP GRO causing GRO writes to return EINVAL. The bug was then
resolved later in
torvalds/linux@89add40066f9ed9abe5f7f886fe5789ff7e0c50e. The offending
commit was pulled into various LTS releases.
Updates #13041
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Previously, despite what the commit said, we were using a raw IP socket
that was *not* an AF_PACKET socket, and thus was subject to the host
firewall rules. Switch to using a real AF_PACKET socket to actually get
the functionality we want.
Updates #13140
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: If657daeeda9ab8d967e75a4f049c66e2bca54b78
When the TS_DEBUG_NETSTACK_LOOPBACK_PORT environment variable is set,
netstack will loop back (dnat to addressFamilyLoopback:loopbackPort)
TCP & UDP flows originally destined to localServicesIP:loopbackPort.
localServicesIP is quad-100 or the IPv6 equivalent.
Updates tailscale/corp#22713
Signed-off-by: Jordan Whited <jordan@tailscale.com>
This was previously disabled in 8e42510 due to missing GSO-awareness in
tstun, which was resolved in d097096.
Updates tailscale/corp#22511
Signed-off-by: Jordan Whited <jordan@tailscale.com>
After the upstream PR is merged, we can point directly at github.com/vishvananda/netlink
and retire github.com/tailscale/netlink.
See https://github.com/vishvananda/netlink/pull/1006
Updates #12298
Signed-off-by: Percy Wegmann <percy@tailscale.com>
net/tstun.Wrapper.InjectInboundPacketBuffer is not GSO-aware, which can
break quad-100 TCP streams as a result. Linux is the only platform where
gVisor GSO was previously enabled.
Updates tailscale/corp#22511
Updates #13211
Signed-off-by: Jordan Whited <jordan@tailscale.com>
In df6014f1d7 we removed build tag
gating preventing importation, which tripped a NetworkExtension limit
test in corp. This was a reversal of
25f0a3fc8f which actually made the
situation worse, hence the simplification.
This commit goes back to the strategy in
25f0a3fc8f, and gets us back under the
limit in my local testing. Admittedly, we don't fully understand
the effects of importing or excluding importation of this package,
and have seen mixed results, but this commit allows us to move forward
again.
Updates tailscale/corp#22125
Signed-off-by: Jordan Whited <jordan@tailscale.com>
In 2f27319baf we disabled GRO due to a
data race around concurrent calls to tstun.Wrapper.Write(). This commit
refactors GRO to be thread-safe, and re-enables it on Linux.
This refactor now carries a GRO type across tstun and netstack APIs
with a lifetime that is scoped to a single tstun.Wrapper.Write() call.
In 25f0a3fc8f we used build tags to
prevent importation of gVisor's GRO package on iOS as at the time we
believed it was contributing to additional memory usage on that
platform. It wasn't, so this commit simplifies and removes those
build tags.
Updates tailscale/corp#22353
Updates tailscale/corp#22125
Updates #6816
Signed-off-by: Jordan Whited <jordan@tailscale.com>
In a93dc6cdb1 tryUpgradeToBatchingConn()
moved to build tag gated files, but the runtime.GOOS condition excluding
Android was removed unintentionally from batching_conn_linux.go. Add it
back.
Updates tailscale/corp#22348
Signed-off-by: Jordan Whited <jordan@tailscale.com>
By default, Windows sets the SIO_UDP_CONNRESET and SIO_UDP_NETRESET
options on created UDP sockets. These behaviours make the UDP socket
ICMP-aware; when the system gets an ICMP message (e.g. an "ICMP Port
Unreachable" message, in the case of SIO_UDP_CONNRESET), it will cause
the underlying UDP socket to throw an error. Confusingly, this can occur
even on reads, if the same UDP socket is used to write a packet that
triggers this response.
The Go runtime disabled the SIO_UDP_CONNRESET behavior in 3114bd6, but
did not change SIO_UDP_NETRESET–probably because that socket option
isn't documented particularly well.
Various other networking code seem to disable this behaviour, such as
the Godot game engine (godotengine/godot#22332) and the Eclipse TCF
agent (link below). Others appear to work around this by ignoring the
error returned (anacrolix/dht#16, among others).
For now, until it's clear whether this ends up in the upstream Go
implementation or not, let's also disable the SIO_UDP_NETRESET in a
similar manner to SIO_UDP_CONNRESET.
Eclipse TCF agent: https://gitlab.eclipse.org/eclipse/tcf/tcf.agent/-/blob/master/agent/tcf/framework/mdep.c
Updates #10976
Updates golang/go#68614
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I70a2f19855f8dec1bfb82e63f6d14fc4a22ed5c3
A SIGSEGV was observed around packet merging logic in gVisor's GRO
package.
Updates tailscale/corp#22353
Signed-off-by: Jordan Whited <jordan@tailscale.com>
In particular, tests showing that #3824 works. But that test doesn't
actually work yet; it only gets a DERP connection. (why?)
Updates #13038
Change-Id: Ie1fd1b6a38d4e90fae7e72a0b9a142a95f0b2e8f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This commit adds a batchingConn interface, and renames batchingUDPConn
to linuxBatchingConn. tryUpgradeToBatchingConn() may return a platform-
specific implementation of batchingConn. So far only a Linux
implementation of this interface exists, but this refactor is being
done in anticipation of a Windows implementation.
Updates tailscale/corp#21874
Signed-off-by: Jordan Whited <jordan@tailscale.com>
It was returning a nil `*iptablesRunner` instead of a
nil `NetfilterRunner` interface which would then fail
checks later.
Fixes#13012
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This commit increases gVisor's TCP max send (4->6MiB) and receive
(4->8MiB) buffer sizes on all platforms except iOS. These values are
biased towards higher throughput on high bandwidth-delay product paths.
The iperf3 results below demonstrate the effect of this commit between
two Linux computers with i5-12400 CPUs. 100ms of RTT latency is
introduced via Linux's traffic control network emulator queue
discipline.
The first set of results are from commit f0230ce prior to TCP buffer
resizing.
gVisor write direction:
Test Complete. Summary Results:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 180 MBytes 151 Mbits/sec 0 sender
[ 5] 0.00-10.10 sec 179 MBytes 149 Mbits/sec receiver
gVisor read direction:
Test Complete. Summary Results:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.10 sec 337 MBytes 280 Mbits/sec 20 sender
[ 5] 0.00-10.00 sec 323 MBytes 271 Mbits/sec receiver
The second set of results are from this commit with increased TCP
buffer sizes.
gVisor write direction:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 297 MBytes 249 Mbits/sec 0 sender
[ 5] 0.00-10.10 sec 297 MBytes 247 Mbits/sec receiver
gVisor read direction:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.10 sec 501 MBytes 416 Mbits/sec 17 sender
[ 5] 0.00-10.00 sec 485 MBytes 407 Mbits/sec receiver
Updates #9707
Updates tailscale/corp#22119
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Brad Fitzpatrick
Renato Aguiar
Anton Tolchanov
Tim Walters
Kristoffer Dalby
Irbe Krumina
James Tucker
Adrian Dewhurst
Jordan Whited
Andrew Dunham
Percy Wegmann
tomholford
Maisem Ali