Wire two new callbacks into the IPN notify stream:
- notifyFilesWaiting: fires when a completed inbound transfer is staged
and ready to retrieve via waitingFiles(). Triggered by n.FilesWaiting
in the notify stream.
- notifyIncomingFiles: fires with a JSON snapshot of in-progress inbound
transfers whenever progress changes (roughly once per second while
active, plus once at completion). The jsIncomingFile struct carries
name, started (Unix ms), declaredSize, and received bytes. An empty
array indicates all active transfers have finished.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Add exit node support to the wasm JS bridge:
- Include `exitNodeOption` and `stableNodeID` on each peer in the
notifyNetMap payload so callers can identify which peers are exit
nodes and reference them by stable ID.
- Call `notifyExitNode(stableNodeID)` whenever prefs change, so
callers can track which exit node (if any) is currently active.
- Expose `setExitNode(stableNodeID)` — sets ExitNodeID via EditPrefs.
- Expose `setExitNodeEnabled(enabled)` — toggles the last-used exit
node on/off via SetUseExitNodeEnabled.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Extend ipn.listen to also accept "tcp"/"tcp4"/"tcp6" and return a
TCPListener bound to a netstack gonet.TCPListener. The listener
exposes accept/close/addr like a Go net.Listener and additionally
implements Symbol.asyncIterator so JS callers can write:
for await (const conn of listener) { ... }
The async iterator returns done when the listener is closed (via
errors.Is(net.ErrClosed)) and rejects on any other accept error.
Symbol-keyed properties are set via Reflect.set since syscall/js
only exposes string-keyed Set.
Add ipn.dialTLS(addr, opts?) which dials a TCP connection through
the Tailscale dialer and performs a TLS handshake on top, returning
a JS Conn just like ipn.dial.
WASM has no system root pool, so verification defaults to the
baked-in LetsEncrypt ISRG roots already linked via net/bakedroots.
That covers any tailnet HTTPS endpoint provisioned via
`tailscale cert`. Callers can override with opts.caCerts (PEM) or
bypass entirely with opts.insecureSkipVerify, and override SNI with
opts.serverName.
Marginal binary cost is ~10 KiB on top of the existing ~31.6 MiB
wasm: crypto/tls and the x509 verification path are already pulled
in by control/controlclient and net/tlsdial.
Wire up the userspace networking primitives to the JS bridge so
browser callers can initiate outbound and receive inbound traffic
over the Tailscale network:
- ipn.dial(network, addr) wraps a tsdial UserDial into a JS Conn
with read/write/close/localAddr/remoteAddr.
- ipn.listen(network, addr) wraps a netstack ListenPacket into a
JS PacketConn with readFrom/writeTo/close/localAddr.
- ipn.listenICMP("icmp4"|"icmp6"|"icmp") creates a raw ICMP
endpoint on the underlying gVisor stack and wraps it as a
PacketConn for sending/receiving ping traffic.
To support listenICMP, netstack.Impl gains a Stack() accessor that
returns the underlying *stack.Stack so jsIPN can call NewEndpoint
with icmp.ProtocolNumber4/6.
Binary I/O uses js.CopyBytesToGo / js.CopyBytesToJS to move bytes
across the syscall/js boundary without base64 round-trips.
Add ExtraRootCAs *x509.CertPool to tsd.System and plumb it through
the control client, noise transport, DERP, and wgengine layers so
that platforms like Android can inject user-installed CA certificates
into Go's TLS verification.
tlsdial.Config now honors base.RootCAs as additional trusted roots,
tried after system roots and before the baked-in LetsEncrypt fallback.
SetConfigExpectedCert gets the same treatment for domain-fronted DERP.
The Android client will set sys.ExtraRootCAs with a pool built from
x509.SystemCertPool + user-installed certs obtained via the Android
KeyStore API, replacing the current SSL_CERT_DIR environment variable
approach.
Updates #8085
Change-Id: Iecce0fd140cd5aa0331b124e55a7045e24d8e0c2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This file was never truly necessary and has never actually been used in
the history of Tailscale's open source releases.
A Brief History of AUTHORS files
---
The AUTHORS file was a pattern developed at Google, originally for
Chromium, then adopted by Go and a bunch of other projects. The problem
was that Chromium originally had a copyright line only recognizing
Google as the copyright holder. Because Google (and most open source
projects) do not require copyright assignemnt for contributions, each
contributor maintains their copyright. Some large corporate contributors
then tried to add their own name to the copyright line in the LICENSE
file or in file headers. This quickly becomes unwieldy, and puts a
tremendous burden on anyone building on top of Chromium, since the
license requires that they keep all copyright lines intact.
The compromise was to create an AUTHORS file that would list all of the
copyright holders. The LICENSE file and source file headers would then
include that list by reference, listing the copyright holder as "The
Chromium Authors".
This also become cumbersome to simply keep the file up to date with a
high rate of new contributors. Plus it's not always obvious who the
copyright holder is. Sometimes it is the individual making the
contribution, but many times it may be their employer. There is no way
for the proejct maintainer to know.
Eventually, Google changed their policy to no longer recommend trying to
keep the AUTHORS file up to date proactively, and instead to only add to
it when requested: https://opensource.google/docs/releasing/authors.
They are also clear that:
> Adding contributors to the AUTHORS file is entirely within the
> project's discretion and has no implications for copyright ownership.
It was primarily added to appease a small number of large contributors
that insisted that they be recognized as copyright holders (which was
entirely their right to do). But it's not truly necessary, and not even
the most accurate way of identifying contributors and/or copyright
holders.
In practice, we've never added anyone to our AUTHORS file. It only lists
Tailscale, so it's not really serving any purpose. It also causes
confusion because Tailscalars put the "Tailscale Inc & AUTHORS" header
in other open source repos which don't actually have an AUTHORS file, so
it's ambiguous what that means.
Instead, we just acknowledge that the contributors to Tailscale (whoever
they are) are copyright holders for their individual contributions. We
also have the benefit of using the DCO (developercertificate.org) which
provides some additional certification of their right to make the
contribution.
The source file changes were purely mechanical with:
git ls-files | xargs sed -i -e 's/\(Tailscale Inc &\) AUTHORS/\1 contributors/g'
Updates #cleanup
Change-Id: Ia101a4a3005adb9118051b3416f5a64a4a45987d
Signed-off-by: Will Norris <will@tailscale.com>
The callback itself is not removed as it is used in other repos, making
it simpler for those to slowly transition to the eventbus.
Updates #15160
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
A customer wants to allow their employees to restart tailscaled at will, when access rights and MDM policy allow it,
as a way to fully reset client state and re-create the tunnel in case of connectivity issues.
On Windows, the main tailscaled process runs as a child of a service process. The service restarts the child
when it exits (or crashes) until the service itself is stopped. Regular (non-admin) users can't stop the service,
and allowing them to do so isn't ideal, especially in managed or multi-user environments.
In this PR, we add a LocalAPI endpoint that instructs ipnserver.Server, and by extension the tailscaled process,
to shut down. The service then restarts the child tailscaled. Shutting down tailscaled requires LocalAPI write access
and an enabled policy setting.
Updates tailscale/corp#32674
Updates tailscale/corp#32675
Signed-off-by: Nick Khyl <nickk@tailscale.com>
The Tracker was using direct callbacks to ipnlocal. This PR moves those
to be triggered via the eventbus.
Additionally, the eventbus is now closed on exit from tailscaled
explicitly, and health is now a SubSystem in tsd.
Updates #15160
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
In this PR, we start passing a LocalAPI actor to (*LocalBackend).Logout to make it subject
to the same access check as disconnects made via tailscale down or the GUI.
We then update the CLI to allow `tailscale logout` to accept a reason, similar to `tailscale down`.
Updates tailscale/corp#26249
Signed-off-by: Nick Khyl <nickk@tailscale.com>
This method is only needed to migrate between store.FileStore and
tpm.tpmStore. We can make a runtime type assertion instead of
implementing an unused method for every platform.
Updates #15830
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Add a new `--encrypt-state` flag to `cmd/tailscaled`. Based on that
flag, migrate the existing state file to/from encrypted format if
needed.
Updates #15830
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Although, at the moment, we do not yet require an event bus to be present, as
we start to add more pieces we will want to ensure it is always available. Add
a new constructor and replace existing uses of new(tsd.System) throughout.
Update generated files for import changes.
Updates #15160
Change-Id: Ie5460985571ade87b8eac8b416948c7f49f0f64b
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
In this PR, we add a generic views.ValuePointer type that can be used as a view for pointers
to basic types and struct types that do not require deep cloning and do not have corresponding
view types. Its Get/GetOk methods return stack-allocated shallow copies of the underlying value.
We then update the cmd/viewer codegen to produce getters that return either concrete views
when available or ValuePointer views when not, for pointer fields in generated view types.
This allows us to avoid unnecessary allocations compared to returning pointers to newly
allocated shallow copies.
Updates #14570
Signed-off-by: Nick Khyl <nickk@tailscale.com>
This gets close to all of the remaining ones.
Updates #12912
Change-Id: I9c672bbed2654a6c5cab31e0cbece6c107d8c6fa
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
A filesystem was plumbed into netstack in 993acf4475
but hasn't been used since 2d5d6f5403. Remove it.
Noticed while rebasing a Tailscale fork elsewhere.
Updates tailscale/corp#16827
Change-Id: Ib76deeda205ffe912b77a59b9d22853ebff42813
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
* updates to LocalBackend require metrics to be passed in which are now initialized
* os.MkdirTemp isn't supported in wasm/js so we simply return empty
string for logger
* adds a UDP dialer which was missing and led to the dialer being
incompletely initialized
Fixes#10454 and #8272
Signed-off-by: Christian <christian@devzero.io>
It was requested by the first customer 4-5 years ago and only used
for a brief moment of time. We later added netmap visibility trimming
which removes the need for this.
It's been hidden by the CLI for quite some time and never documented
anywhere else.
This keeps the CLI flag, though, out of caution. It just returns an
error if it's set to anything but true (its default).
Fixes#12058
Change-Id: I7514ba572e7b82519b04ed603ff9f3bdbaecfda7
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Add a WebDAV-based folder sharing mechanism that is exposed to local clients at
100.100.100.100:8080 and to remote peers via a new peerapi endpoint at
/v0/tailfs.
Add the ability to manage folder sharing via the new 'share' CLI sub-command.
Updates tailscale/corp#16827
Signed-off-by: Percy Wegmann <percy@tailscale.com>
It's required as of the recent 5297bd2cff.
Updates #7894
Updates #9394 (sure would be nice)
Change-Id: Id6672408dd8a6c82dba71022c8763e589d789fcd
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
And convert all callers over to the methods that check SelfNode.
Now we don't have multiple ways to express things in tests (setting
fields on SelfNode vs NetworkMap, sometimes inconsistently) and don't
have multiple ways to check those two fields (often only checking one
or the other).
Updates #9443
Change-Id: I2d7ba1cf6556142d219fae2be6f484f528756e3c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It became required as of 6e967446e4
Updates #8052
Change-Id: I08d100534254865293c1beca5beff8e529e4e9ac
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I missed this in 343c0f1031 and I guess we don't have integration
tests for wasm. But it compiled! :)
Updates #fixup to a #cleanup
Change-Id: If147b90bab254d144ec851a392e8db10ab97f98e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Previously two tsnet nodes in the same process couldn't have disjoint
sets of controlknob settings from control as both would overwrite each
other's global variables.
This plumbs a new controlknobs.Knobs type around everywhere and hangs
the knobs sent by control on that instead.
Updates #9351
Change-Id: I75338646d36813ed971b4ffad6f9a8b41ec91560
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
All platforms use it at this point, including iOS which was the
original hold out for memory reasons. No more reason to make it
optional.
Updates #9332
Change-Id: I743fbc2f370921a852fbcebf4eb9821e2bdd3086
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This is part of an effort to clean up tailscaled initialization between
tailscaled, tailscaled Windows service, tsnet, and the mac GUI.
Updates #8036
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
On some platforms (notably macOS and iOS) we look up the default
interface to bind outgoing connections to. This is both duplicated
work and results in logspam when the default interface is not available
(i.e. when a phone has no connectivity, we log an error and thus cause
more things that we will try to upload and fail).
Fixed by passing around a netmon.Monitor to more places, so that we can
use its cached interface state.
Fixes#7850
Updates #7621
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
This adds an initial and intentionally minimal configuration for
golang-ci, fixes the issues reported, and adds a GitHub Action to check
new pull requests against this linter configuration.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I8f38fbc315836a19a094d0d3e986758b9313f163
This change focuses on the backend log ID, which is the mostly commonly
used in the client. Tests which don't seem to make use of the log ID
just use the zero value.
Signed-off-by: Will Norris <will@tailscale.com>
Makes the Wasm client more similar to the others, and allows the default
profile to be correctly picked up when restarting the client in dev
mode (where we persist the state in sessionStorage).
Also update README to reflect that Go wasm changes can be picked up
with just a reload (as of #5383)
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Codinget
Brad Fitzpatrick
Will Norris
Claus Lensbøl
Nick Khyl
Need-an-AwP
Andrew Lytvynov
M. J. Fromberger
Christian
Maisem Ali
Percy Wegmann
Mihai Parparita
Andrew Dunham
Tom DNetto