This change ensures `packetFilterPermitsUnlockedNodes` also considers SrcCaps-based grants when checking for unsigned peer access.
Fixestailscale/corp#45116
Change-Id: I0ac938367888f67ed6f355fc19959cc8c31722a2
Signed-off-by: Mike Jensen <mikej@tailscale.com>
The wireguard-go device now learns its peer set solely from the live
per-peer config source that LocalBackend installs with
Engine.SetPeerConfigFunc, backed by the route manager. Peers are
created lazily on first packet and converged per peer with
Engine.SyncDevicePeer, so the full-peer-list snapshot in wgcfg.Config
and the diff-and-reconfigure machinery around it (wgcfg.Peer,
ReconfigDevice, and the engine's full device sync in
maybeReconfigWireguardLocked) are dead weight: they duplicated state
that the route manager already owns and forced every netmap change to
rebuild and rehash the entire peer list.
Delete the Peers field and the Peer type from wgcfg, along with
ReconfigDevice and maybeReconfigWireguardLocked. Engine.Reconfig no
longer does any device peer work; it only manages the private key,
addresses, and the non-peer subsystems. Full-netmap application converges the device by
syncing exactly the peers whose routes the route manager reports as
changed or removed.
Updates #12542
Change-Id: Ic776e42cfaa5be6b9329b3d381d5cbde17d7078b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
routerConfigLocked previously computed router.Config.Routes with
peerRoutes, a from-scratch pass over cfg.Peers on every reconfig.
The route manager already maintains the same set incrementally (ULA
and CGNAT coarsening included) and updateRouteManagerPrefs runs
earlier in authReconfig, so its OS route set is current by the time
the router config is built. Read it from there instead, and delete
peerRoutes and its tests; the routemanager package tests cover the
same behavior. This removes a consumer of cfg.Peers, which is on
its way out.
Updates #12542
Change-Id: I4a5b7a63d530e3fe1b70f0faf3f49def6a10be2e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Engine.PeerForIP was pure delegation to the callback that LocalBackend
installs via SetPeerForIPFunc, so external callers going through the
engine were taking a pointless round trip: LocalBackend called
b.e.PeerForIP, which called right back into LocalBackend, and the
netstack UseNetstackForIP hooks in tsnet and tailscaled did the same
dance one layer removed.
Export LocalBackend.PeerForIP and make those callers use it directly.
The engine-internal cold paths (Ping, TSMP disco advertisements,
pendopen diagnostics) still need the lookup and have no netmap of
their own, so SetPeerForIPFunc stays on the interface, but the lookup
method itself is now unexported and gone from the Engine interface.
In tailscaled the UseNetstackForIP hook moves from netstack setup to
just after the LocalBackend is created, since the backend doesn't
exist yet when netstack is wired up.
Updates #12542
Change-Id: Ib1e1a4fa5c84ee0dcb9ce5d1910047f2bab9453c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The engine kept its own longest-prefix-match table (peerByIPRoute),
rebuilt from the full peer list on every reconfig, to route outbound
packets and answer PeerKeyForIP. That's now the route manager's job:
LocalBackend already installs a PeerByIPPacketFunc backed by the
RouteManager's incrementally-maintained outbound table, so the
engine's copy was redundant state with redundant O(n peers) rebuild
work.
Delete the table, the PeerKeyForIP interface method, and the BART-only
default callback. LocalBackend's peerForIP now queries the
RouteManager's outbound table directly for the subnet-route and
exit-node fallback. Engines running without a LocalBackend (such as
wgengine/bench) must install their own outbound peer lookup, since the
device's standard AllowedIPs trie only covers peers that already
exist and can't lazily create them.
Updates #12542
Change-Id: I25100399e273ed6c2bb1f6136b7cd81bc83e7313
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Previously, any peer added or removed by an incremental netmap delta
was only visible to wireguard-go after a full authReconfig: wgcfg's
ReconfigDevice re-installed a PeerLookupFunc closing over a freshly
built map of every peer's allowed IPs, doing O(n) work per change.
Instead, install the wireguard-go device hooks once, backed by live
state. Engine.SetPeerConfigFunc installs a single long-lived
PeerLookupFunc that queries LocalBackend's per-node RouteManager on
demand, and Engine.SyncDevicePeer does O(1) per-peer device sync
(remove, or update allowed IPs) as each delta mutation is applied.
Full reconfigs keep an O(n peers) device sync for now, but with no
lookup closure to reinstall and no removed-peer resurrection race; a
later change removes full-config peer syncing entirely.
The RouteManager's PeerAllowedIPs accessor backs the new hooks: its
sorted output makes unchanged state a no-op update, and its peer
filtering mirrors nmcfg.WGCfg, so expired peers and peers predating
both DERP and disco contribute no prefixes and thus cannot be lazily
created in the device, which matters because wireguard-go validates
inbound source IPs against per-peer allowed IPs.
The engine's SetPeerByIPPacketFunc callback is now authoritative when
installed, since LocalBackend's implementation covers subnet routes
and exit-node routes via the RouteManager's outbound table; the
engine's own reconfig-time BART table only serves engines running
without a LocalBackend.
The forced authReconfig on peer add/remove stays for now: the
WireGuard device no longer needs it, but OS routes, the quad-100
resolver's MagicDNS hosts map, and tstun's masquerade/jailed peer
config are still derived from the full peer set. Making those
delta-aware is the next step before gating it.
Updates #12542
Change-Id: I3ba8c7c324bca0ad0269279d03f53b1f17fb63a2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Selecting an exit node that doesn't resolve to any current peer (a
nonexistent node, or MDM's "auto:any" placeholder before it is
resolved) installs the blackhole default routes, so internet traffic
is dropped rather than escaping to the local network. That behavior
is documented on ipn.Prefs.ExitNodeID and five-plus years old, but
nothing tested it. Lock it in ahead of an upcoming change that moves
OS route computation to net/routemanager and must preserve it.
Updates #12542
Change-Id: I0f63b0d5ce46061a74c69b75f7f83f115da7c3d4
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The netmap.NetworkMap type is deprecated and going away, and
reconfigAppConnectorLocked only needed its SelfNode field anyway.
Take a tailcfg.NodeView instead and check its validity in place of
the old nil netmap check.
Updates #12542
Change-Id: Id617845b67416404500cca438ce4ac0372cd8a8e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Found with the regex `\b([A-Za-z]+) \1\b`.
Updates #cleanup
Change-Id: I4cc51784d9b6437d3d0c66b531828707f87f7fd5
Signed-off-by: Alex Chan <alexc@tailscale.com>
Now that the routecheck subsystem is continuously collecting
reachability reports in the background, we can add a hook to
LocalBackend for fetching its report. That allows
suggestExitNodeUsingTrafficSteering to consult that report when
disqualifying candidates, instead of blocking on an immediate probe.
Exit node suggestions will only consult the report when the
`client-side-reachability` and `client-side-reachability-routecheck`
node attributes are both set on the current node.
Updates #17366
Updates tailscale/corp#33033
Signed-off-by: Simon Law <sfllaw@tailscale.com>
This adds the NotifyInitialPolicy watch option and the Policy field in
Notify so that clients can receive the effective policy snapshot via IPN
bus.
This extends policyclient.Client so ipnlocal can get and watch policy
snapshots, which is used by sysPolicyChanged to notify watchers.
User-scoped policy store registration, management, and cleanup will be
added in a follow-up
Updates tailscale/corp#42259
Signed-off-by: kari <kari@tailscale.com>
Move all the FooForTest methods on LocalBackend to instead be
methods on a new unexported forTest type which is then given out
to callers in other packages via an exported ForTest method
(panicking in non-test contexts) that returns that unexported type.
This is unusual style (exported returning unexported) but declutters
godoc and makes call sites both more explicit and easier to read
without the "ForTest" suffix polluting the symbols. Now FooForTest()
changes into ForTest().Foo().
This was motivated by a pending change moving a bunch of code out of
LocalBackend into other packages that required adding more ForTest
methods to LocalBackend to keep the tests (now in other packages)
working. Instead, do this refactor now so the future change is prettier.
Updates #12614
Updates #cleanup
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: Ib25e6d76d48dc8622ac3a955e0b1220d582e63a8
WhoIs lookups for an IPv6-mapped IPv4 address such as
"::ffff:100.87.98.86" failed to match the node's canonical IPv4
address. Unmap the address before looking it up so these resolve.
Fixes#20235
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Signed-off-by: Bouke van der Bijl <i@bou.ke>
userspaceEngine.PeerForIP read from e.netMap.Peers and
e.lastCfgFull.Peers, both of which go stale when peers arrive via
netmap deltas (which skip Engine.SetNetworkMap and Engine.Reconfig).
Every PeerForIP caller (Engine.Ping, the TSMP disco-key handler,
pendopen diagnostics, tsdial.Dialer.UseNetstackForIP, and
LocalBackend.GetPeerEndpointChanges) would report "no matching peer"
for freshly-added peers.
Fix it the same way SetPeerByIPPacketFunc fixed the outbound packet
hot path: have LocalBackend install a callback that reads the live
nodeBackend. nb.NodeByAddr is built from both SelfNode and Peers
(updateNodeByAddrLocked), so a single lookup covers the common case
with IsSelf set when the matched node ID is SelfNode's. The subnet-
route / exit-node-default-route slow path goes through a new
Engine.PeerKeyForIP that exposes the engine's AllowedIPs BART table
(the same table the outbound packet hot path already consults, with
exit-node selection honored), and resolves the matched key back to a
NodeView via the live nodeBackend.
Updates #12542
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I0d4b0d8997c8e796b7367c46b49b61d4fdc717b0
When recommending an exit node, suggestExitNodeLocked ranks candidates by
the latency to their home DERP region, taken from the most recent netcheck
report. But netcheck alternates between full reports, which probe every
region, and incremental reports, which only re-probe the home region and a
handful of the fastest regions. When the most recent report is incremental,
the suggestion fell back to a random for exit nodes that are far away.
Now we rank candidates against the best recent latency, tracked by the
`netcheck.Client` - the same data that is used to pick the preferred
DERP. It uses a history of measurements which includes a full netcheck
report, so should cover all DERP regions.
Updates tailscale/corp#17516
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
Add NotifyInProcessNoDisconnect for in-process IPN bus subscribers that
must apply every bus update. When such a subscriber falls behind, block
Notify production instead of sending the terminal fell-behind message and
closing the watch.
This is intentionally not available over LocalAPI, where a slow or stuck
out-of-process client should still be disconnected rather than allowed to
stall tailscaled. In-process callers that use the bit must keep their
callbacks fast and must not call back into LocalBackend from the callback.
Updates #20062
Change-Id: I730ad61a07475243bb226fba2262c1a3ded211ae
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
New-style IPN bus subscribers consume stateful delta streams. Reject
NotifyRateLimit when it is combined with those subscription bits so
tailscaled cannot merge or delay messages that clients need to apply in
order.
Also stop silently dropping notifications when a watcher falls behind.
Remove the watcher, replace its stale queue with one terminal ErrMessage
notification, and close the watch.
Updates #20062
Change-Id: Id9d402ea76f4011cd23f122adf62f30dd4b6f90b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
All StateStore implementations store a nil value in the cache map when WriteState is called with a nil byte slice instead of deleting the key. This causes ReadState to return (nil, nil) instead of (nil, ErrStateNotExist), since the key is still present in the map.
This breaks reset-auth in Windows, Linux, and Android, and the node can't log back in without manually editing the state file. (macOS uses a different state store)
DeleteProfile, DeleteAllProfilesForUser, setUnattendedModeAsConfigured are impacted but don't seem to break because the deleted keys are not reread.
This deletes the key from the cache instead.
Fixestailscale/corp#42477
Signed-off-by: kari-ts <kari@tailscale.com>
The prior aa5da2e5f2 ("process node adds/removes in constant
time") commit missed a bus notification case, where new-style
subscribers set NotifyNoNetmap and then the controlclient map routing
sends a full update (rather than a delta). Those profiles + peers
need to be put on the bus too.
I noticed this only when porting the Android app over to use the
new bus stuff.
Updates #19607
Updates #12542
Change-Id: I82c35011d2c532222ca27f7d4e790522c31bd156
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In PR tailscale/corp#30448, we originally decided to break ties using
SHA256 for our rendezvous hashing algorithm. Now that we’ve had some
experience with it, we think that FNV-1a is a better choice. It
distributes bits evenly, it’s much faster, and it doesn’t need to be
cryptographically secure. The FNV designers recommend FNV-1a over the
deprecated FNV-1.
This PR makes the switch and updates the related tests, since changing
the algorithm changes which stable pick gets selected. As of 2026-05,
this is the best time to make this change, since there are almost no
clients in the wild with traffic steering enabled.
Updates #17366
Updates tailscale/corp#29964
Updates tailscale/corp#29966
Updates tailscale/corp#33033
Signed-off-by: Simon Law <sfllaw@tailscale.com>
For large tailnets (~50k+ nodes) with frequent peer churn (ephemeral
GitHub Actions workers etc.), tailscaled used to rebuild the full
netmap and fan it out on the IPN bus on every MapResponse that
added or removed a peer. There were two O(N) costs per delta: the
full netmap rebuild + every Notify.NetMap encode to every bus watcher.
This change tackles both:
1. Plumb O(1) peer add/remove through the delta path. PeersChanged
and PeersRemoved no longer prevent the delta happy path; instead,
they mutate the per-node-backend peer map in place.
2. Restrict ipn.Notify.NetMap emission to the platforms whose host
GUIs still depend on it (Windows, macOS, iOS) and migrate
in-tree consumers off it everywhere else:
- Migrate reactive consumers (containerboot, kube agents,
sniproxy, tsconsensus, etc.) off Notify.NetMap to the
previously-added Notify.SelfChange signal so they no longer
have to subscribe to the full netmap.
- Add ipn.NotifyNoNetMap so GUI clients on "legacy-emit" platforms
that have already migrated can opt out of the per-watcher
NetMap encode.
- Gate Notify.NetMap emission on the producer side by a compile-
time GOOS check, so the supporting code is dead-code-eliminated
on Linux and other geese where no GUI consumer needs it.
Re-running BenchmarkGiantTailnet from tstest/largetailnet, which was
added along with baseline numbers on unmodified main in ad5436af0d,
the per-delta cost (one peer add+remove pair) is now ~O(1) regardless
of tailnet size N:
N no-watcher (ms/op) bus-watcher (ms/op)
before now factor before now factor
10000 32 0.11 300x 166 0.13 1300x
50000 222 0.11 2000x 865 0.13 6700x
100000 504 0.12 4100x 1765 0.13 13400x
250000 1551 0.12 12500x 4696 0.15 32400x
Updates #12542
Change-Id: I94e34b37331d1a8ec74c299deffadf4d061fda9e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The TestShouldUseOneCGNATRoute test fails when the underlying system
interfaces don’t match what the underlying assumptions of the test.
That assumption was that there would only ever be one CGNAT interface:
the Tailscale one.
This breaks on Linux when border0 is installed because border0 also
creates an interface with a CGNAT route.
This patch stubs netmon.RegisterInterfaceGetter to replace the system
interfaces and netmon.SetTailscaleInterfaceProps to identify the test
data that defines the Tailscale interface.
This patch also tests the control knob override for CGNAT for every
combination of operating system and system interfaces, instead of just
a couple of combinations.
Fixes#19731
Signed-off-by: Simon Law <sfllaw@tailscale.com>
Android rebuilds its VpnService interface when the VPN route
configuration changes, which tears down long lived TCP connections
through the tunnel. Use the same automatic OneCGNATRoute behavior as
macOS on Android, and prefer the single CGNAT route when no other
interface is using the CGNAT, falling back to fine grained peer routes
otherwise.
Updates tailscale/tailscale#19591
Signed-off-by: kari <kari@tailscale.com>
LocalBackend stores loginFlags at construction so that per-instance
properties (e.g. LoginEphemeral set by tsnet.Server.Ephemeral) persist
for the session. StartLoginInteractiveAs already merges b.loginFlags
into its cc.Login call, but the two auto-login call sites pass bare
controlclient.LoginDefault, silently dropping any stored flags.
Merge b.loginFlags at both auto-login call sites to match the existing
StartLoginInteractiveAs pattern. LoginDefault is zero so this is a
no-op when loginFlags is empty, and restores the documented behavior
when it isn't.
Fixes#15852
Signed-off-by: Scott Graham <scott.github@h4ck3r.net>
To denoise log output, to make it easier to find real failures.
Updates #19252
Change-Id: Iae64a9278c70de24a236c39e3d181a509a512a0b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Add a new vet analyzer that checks t.Run subtest names don't contain
characters requiring quoting when re-running via "go test -run". This
enforces the style guide rule: don't use spaces or punctuation in
subtest names.
The analyzer flags:
- Direct t.Run calls with string literal names containing spaces,
regex metacharacters, quotes, or other problematic characters
- Table-driven t.Run(tt.name, ...) calls where tt ranges over a
slice/map literal with bad name field values
Also fix all 978 existing violations across 81 test files, replacing
spaces with hyphens and shortening long sentence-like names to concise
hyphenated forms.
Updates #19242
Change-Id: Ib0ad96a111bd8e764582d1d4902fe2599454ab65
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Add a new tailcfg.NodeCapability (NodeAttrCacheNetworkMaps) to control whether
a node with support for caching network maps will attempt to do so. Update the
capability version to reflect this change (mainly as a safety measure, as the
control plane does not currently need to know about it).
Use the presence (or absence) of the node attribute to decide whether to create
and update a netmap cache for each profile. If caching is disabled, discard the
cached data; this allows us to use the presence of a cached netmap as an
indicator it should be used (unless explicitly overridden). Add a test that
verifies the attribute is respected. Reverse the sense of the environment knob
to be true by default, with an override to disable caching at the client
regardless what the node attribute says.
Move the creation/update of the netmap cache (when enabled) until after
successfully applying the network map, to reduce the possibility that we will
cache (and thus reuse after a restart) a network map that fails to correctly
configure the client.
Updates #12639
Change-Id: I1df4dd791fdb485c6472a9f741037db6ed20c47e
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
* ipn/ipnlocal: warn incompatibility between no-snat-routes and exitnode
This commit adds a warning to health check when the --snat-subnet-routes=false flag for subnet router is
set alone side --advertise-exit-node=true. These two would conflict with each other and result internet-bound
traffic from peers using this exit node no masqueraded to the node's source IP and fail to route return
packets back. The described combination is not valid until we figure out a way to separate exitnode masquerade rule and skip it for subnet routes.
Updates #18725
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* use date instead of for now to clarify effectivness
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
---------
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
If AutoUpdate.Check is false, the client has opted out of checking for updates, so we shouldn't broadcast ClientVersion. If the client has opted in, it should be included in the initial Notify.
Updates tailscale/corp#32629
Signed-off-by: kari-ts <kari@tailscale.com>
This path is currently only used by DERP servers that have also
enabled `verify-clients` to ensure that only authorized clients
within a Tailnet are allowed to use said DERP server.
The previous naive linear scan in NodeByKey would almost
certainly lead to bad outcomes with a large enough netmap, so
address an existing todo by building a map of node key -> node ID.
Updates #19042
Signed-off-by: Amal Bansode <amal@tailscale.com>
* ipn: reject advertised routes with non-address bits set
The config file path, EditPrefs local API, and App Connector API were
accepting invalid subnet route prefixes with non-address bits set (e.g.,
2a01:4f9:c010:c015::1/64 instead of 2a01:4f9:c010:c015::/64). All three
paths now reject prefixes where prefix != prefix.Masked() with an error
message indicating the expected masked form.
Updates tailscale/corp#36738
Signed-off-by: Brendan Creane <bcreane@gmail.com>
* address review comments
Signed-off-by: Brendan Creane <bcreane@gmail.com>
---------
Signed-off-by: Brendan Creane <bcreane@gmail.com>
This populates UserProfile.Groups in the WhoIs response from the
local backend with the groups of the corresponding user in the
netmap.
This allows tsnet apps to see (and e.g. forward) which groups a
user making a request belongs to - as long as the tsnet app runs
on a node that been granted the tailscale.com/visible-groups
capability via node attributes. If that's not the case or the
user doesn't belong to any groups allow-listed via the node
attribute, Groups won't be populated.
Updates tailscale/corp#31529
Signed-off-by: Gesa Stupperich <gesa@tailscale.com>
This commit is based on ff0978ab, and extends #18497 to connect network map
caching to the LocalBackend. As implemented, only "whole" netmap values are
stored, and we do not yet handle incremental updates. As-written, the feature must
be explicitly enabled via the TS_USE_CACHED_NETMAP envknob, and must be
considered experimental.
Updates #12639
Co-Authored-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I48a1e92facfbf7fb3a8e67cff7f2c9ab4ed62c83
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
This file was never truly necessary and has never actually been used in
the history of Tailscale's open source releases.
A Brief History of AUTHORS files
---
The AUTHORS file was a pattern developed at Google, originally for
Chromium, then adopted by Go and a bunch of other projects. The problem
was that Chromium originally had a copyright line only recognizing
Google as the copyright holder. Because Google (and most open source
projects) do not require copyright assignemnt for contributions, each
contributor maintains their copyright. Some large corporate contributors
then tried to add their own name to the copyright line in the LICENSE
file or in file headers. This quickly becomes unwieldy, and puts a
tremendous burden on anyone building on top of Chromium, since the
license requires that they keep all copyright lines intact.
The compromise was to create an AUTHORS file that would list all of the
copyright holders. The LICENSE file and source file headers would then
include that list by reference, listing the copyright holder as "The
Chromium Authors".
This also become cumbersome to simply keep the file up to date with a
high rate of new contributors. Plus it's not always obvious who the
copyright holder is. Sometimes it is the individual making the
contribution, but many times it may be their employer. There is no way
for the proejct maintainer to know.
Eventually, Google changed their policy to no longer recommend trying to
keep the AUTHORS file up to date proactively, and instead to only add to
it when requested: https://opensource.google/docs/releasing/authors.
They are also clear that:
> Adding contributors to the AUTHORS file is entirely within the
> project's discretion and has no implications for copyright ownership.
It was primarily added to appease a small number of large contributors
that insisted that they be recognized as copyright holders (which was
entirely their right to do). But it's not truly necessary, and not even
the most accurate way of identifying contributors and/or copyright
holders.
In practice, we've never added anyone to our AUTHORS file. It only lists
Tailscale, so it's not really serving any purpose. It also causes
confusion because Tailscalars put the "Tailscale Inc & AUTHORS" header
in other open source repos which don't actually have an AUTHORS file, so
it's ambiguous what that means.
Instead, we just acknowledge that the contributors to Tailscale (whoever
they are) are copyright holders for their individual contributions. We
also have the benefit of using the DCO (developercertificate.org) which
provides some additional certification of their right to make the
contribution.
The source file changes were purely mechanical with:
git ls-files | xargs sed -i -e 's/\(Tailscale Inc &\) AUTHORS/\1 contributors/g'
Updates #cleanup
Change-Id: Ia101a4a3005adb9118051b3416f5a64a4a45987d
Signed-off-by: Will Norris <will@tailscale.com>
In order to better manage per-profile data resources on the client, add methods
to the LocalBackend to support creation of per-profile directory structures in
local storage. These methods build on the existing TailscaleVarRoot config, and
have the same limitation (i.e., if no local storage is available, it will
report an error when used).
The immediate motivation is to support netmap caching, but we can also use this
mechanism for other per-profile resources including pending taildrop files and
Tailnet Lock authority caches.
This commit only adds the directory-management plumbing; later commits will
handle migrating taildrop, TKA, etc. to this mechanism, as well as caching
network maps.
Updates #12639
Change-Id: Ia75741955c7bf885e49c1ad99f856f669a754169
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
In suggestExitNodeLocked, if no exit node candidates have a home DERP or
valid location info, `bestCandidates` is an empty slice. This slice is
passed to `selectNode` (`randomNode` in prod):
```go func randomNode(nodes views.Slice[tailcfg.NodeView], …) tailcfg.NodeView {
…
return nodes.At(rand.IntN(nodes.Len()))
}
```
An empty slice becomes a call to `rand.IntN(0)`, which panics.
This patch changes the behaviour, so if we've filtered out all the
candidates before calling `selectNode`, reset the list and then pick
from any of the available candidates.
This patch also updates our tests to give us more coverage of `randomNode`,
so we can spot other potential issues.
Updates #17661
Change-Id: I63eb5e4494d45a1df5b1f4b1b5c6d5576322aa72
Signed-off-by: Alex Chan <alexc@tailscale.com>
In PR tailscale/corp#34401, the `traffic-steering` feature flag does
not automatically enable traffic steering for all nodes. Instead, an
admin must add the `traffic-steering` node attribute to each client
node that they want opted-in.
For backwards compatibility with older clients, tailscale/corp#34401
strips out the `traffic-steering` node attribute if the feature flag
is not enabled, even if it is set in the policy file. This lets us
safely disable the feature flag.
This PR adds a missing test case for suggested exit nodes that have no
priority.
Updates tailscale/corp#34399
Signed-off-by: Simon Law <sfllaw@tailscale.com>
It's an unnecessary nuisance having it. We go out of our way to redact
it in so many places when we don't even need it there anyway.
Updates #12639
Change-Id: I5fc72e19e9cf36caeb42cf80ba430873f67167c3
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
