This change ensures `packetFilterPermitsUnlockedNodes` also considers SrcCaps-based grants when checking for unsigned peer access.
Fixestailscale/corp#45116
Change-Id: I0ac938367888f67ed6f355fc19959cc8c31722a2
Signed-off-by: Mike Jensen <mikej@tailscale.com>
The nodeBackend's netMap.Peers slice is frozen at the last full netmap
install; the live per-peer state lives in the nodeBackend.peers map,
updated by delta mutations. Three spots still read the stale slice or
paid to materialize a fresh one:
AppendMatchingPeers iterated netMap.Peers and re-looked-up each ID in
the peers map (with a lock round-trip per peer), so peers added by a
delta since the last full netmap were invisible to it. That affected
its callers: taildrop's file-target list, exit node suggestions, and
conn25's connector discovery. It now snapshots the peers map directly
(sorted by node ID, matching the old netmap ordering).
DebugPeerDiscoKeys read netMap.Peers and so returned stale disco keys
after deltas. It now reads the peers map via the new
nodeBackend.peerDiscoKeys.
pingPeerAPI called NetMapWithPeers, building and sorting the full
O(n) peer slice, just to linearly scan it for one IP. It now uses the
nodeBackend's existing by-address index and the new O(1) PeerByID
accessor, and passes the peers-free netmap to peerAPIBase, which only
reads the self node's addresses.
Updates #12542
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I2e57527d64733b4eb17006f896faaa907b1d128c
Processing a peer add/remove delta still materialized the full netmap
(an O(n) slicesx.MapValues plus sort over all peers, at 10k+
peers in a large tailnet) twice per delta: once in UpdateNetmapDelta
purely to hand the self node to Engine.SetSelfNode, and once in
authReconfigLocked.
Neither needs peers anymore. SetSelfNode gets the self node from the
existing nodeBackend.Self accessor. authReconfigLocked only reads
self-node fields (SelfNode, NodeKey, GetAddresses, HasCap) now that
WireGuard peers ride the incremental route manager and per-peer config
source, so it can use the peers-free NetMap accessor.
That also makes nmcfg.WGCfg vestigial: since wgcfg.Config lost its
Peers field, its peer walk existed only to emit the [v1] skip logs
(expired peers, unselected exit nodes, unaccepted subnet routes),
duplicating filtering the route manager already does. Delete the
package and construct the two-field wgcfg.Config inline. The skip
logs go away; if they're missed, the route manager can log them
incrementally at upsert time instead of rescanning every peer on
every reconfig.
With this, the runtime.DidRange analysis (see the ts_rangehook test)
shows a delta netmap update performing no O(n) range loops except
updateRouteManagerExtras, and the delta phase of that test drops from
1.09s to 0.14s for 400 deltas at n=10000 (from 4.79s at the
start of this effort, before the incremental route manager work).
Updates #12542
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: Ia0e03ef9db0c988790b2c29de1f0505305e93f58
Captive portal detection was half-migrated: it had a build tag and
buildfeatures constant, but its code still lived in build-tag-gated
files in ipn/ipnlocal and net/netcheck, with its per-backend state
(context, cancel func, signaling channel) as fields on LocalBackend.
Move it under feature/captiveportal. The health-driven detection loop
becomes an ipnext.Extension holding its own state: it starts and
stops the loop from the BackendStateChange hook and subscribes to
health.Change events on the eventbus itself, removing the captive
portal hooks and special cases from LocalBackend entirely. The DERP
map now comes from a new ipnext.NodeBackend.DERPMap method, and the
preferred DERP region from magicsock's last netcheck report (the
same underlying source as the previously used Hostinfo.NetInfo).
The netcheck probe hook is now exported with a signature free of
netcheck internals, and its implementation moves to the small
feature/captiveportal/netcheckhook package, which installs the hook
as an import side effect. That package stays free of tsd/wgengine
dependencies so the tailscale CLI can keep probing for captive
portals in "tailscale netcheck" without linking the daemon-side
extension. The net/captivedetection library itself is unchanged and
stays put; after this change it is only linked when something pulls
in netcheckhook or the feature extension.
tailscaled links the feature by default via condregister as before,
but tsnet no longer does (shrinking tsnet, k8s-operator, and tsidp);
tsnet users who want it can blank-import the feature package, and
tsnet's dep test now locks that in.
Updates #12614
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I3f1d09f9dc03e18f9a648ab5e42d16fa540b3fa9
The wireguard-go device now learns its peer set solely from the live
per-peer config source that LocalBackend installs with
Engine.SetPeerConfigFunc, backed by the route manager. Peers are
created lazily on first packet and converged per peer with
Engine.SyncDevicePeer, so the full-peer-list snapshot in wgcfg.Config
and the diff-and-reconfigure machinery around it (wgcfg.Peer,
ReconfigDevice, and the engine's full device sync in
maybeReconfigWireguardLocked) are dead weight: they duplicated state
that the route manager already owns and forced every netmap change to
rebuild and rehash the entire peer list.
Delete the Peers field and the Peer type from wgcfg, along with
ReconfigDevice and maybeReconfigWireguardLocked. Engine.Reconfig no
longer does any device peer work; it only manages the private key,
addresses, and the non-peer subsystems. Full-netmap application converges the device by
syncing exactly the peers whose routes the route manager reports as
changed or removed.
Updates #12542
Change-Id: Ic776e42cfaa5be6b9329b3d381d5cbde17d7078b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Previously tstun.Wrapper.SetWGConfig walked wgcfg.Config.Peers on every
netmap to rebuild its own IP-to-peer table for masquerade NAT rewrites
and jailed-peer classification. Now the tun layer instead consumes the
route manager's shared immutable outbound snapshot directly, via a new
Engine.SetPeerRoutes method: LocalBackend pushes the snapshot (plus this
node's native Tailscale addresses) after every route manager commit that
can change it, and per-packet lookups read the interned PeerRoute
attributes from that table.
When no current peer is jailed or masqueraded, LocalBackend installs a
nil table (gated on RouteManager.HasDataPlaneAttrs), preserving the
per-packet nil-check fast path. The exitNodeRequiresMasq machinery is
deleted: its purpose was populating the table with all peers so that
more-specific entries shadow an exit node's /0, and the always-full
route manager table gives that shadowing inherently.
This is the last step before removing the Peers field from wgcfg.Config.
Updates #12542
Change-Id: Ifce09ca929a3f2511303ca1d6efdd583739494ce
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Every netmap change, including an incremental delta of a single peer,
rebuilt the full MagicDNS state twice: dnsConfigForNetmap walked all
peers to build the dns.Config.Hosts map, and resolver.SetConfig then
walked that map again to build its reverse (PTR) index. On a tailnet
with 10k peers that is a lot of garbage per delta.
Instead, add a resolver.MagicDNSHosts hook, installed once by
LocalBackend, that the quad-100 resolver consults on demand at query
time. It is backed by nodeBackend's nodeByName, nodeByAddr, and peers
indexes, which are already maintained incrementally as netmap deltas
arrive. The subdomain-resolve capability check also moves to the hook
(checking the node's CapMap at query time), so dns.Config's
SubdomainHosts is no longer populated.
dns.Config.Hosts remains for control's DNS.ExtraRecords, which are
few and which feed the split-DNS decisions in dns.Manager's
compileConfig, and on Windows it still carries every node's records
because the hosts-file fallback path (compileHostEntries) needs the
complete enumerable set. Those compileConfig decisions also consulted
the per-node Hosts entries (hasHostsWithoutSplitDNSRoutes), so a new
Config.MagicDNSHostsUnrouted bit preserves that signal now that node
records are not listed: with MagicDNS names present but MagicDNS
domain routing off, quad-100 stays in the OS resolver path.
One small behavior change: reverse (PTR) lookups now also answer for
node addresses whose forward records are filtered out by the
IPv6-suppression rule (issue #1152), since nodeByAddr indexes all node
addresses. Previously such addresses were absent from the pushed
Hosts map and thus from the reverse index.
Updates #12542
Updates tailscale/corp#43949
Change-Id: I63b99199c2b3b124c08cb8bbaea1f63165095294
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The conn25 extension's ExtraWireGuardAllowedIPs hook (Transit IPs)
was only appended to wgcfg.Config.Peers in authReconfig. Now that
outbound peer selection comes from the route manager's outbound
table via the engine's PeerByIPPacketFunc (which, when installed,
replaces wireguard-go's AllowedIPs trie lookup entirely) and lazily
created peers get their allowed IPs from the route manager via the
engine's peer config func, those extras never reached either path:
outbound packets to Transit IPs matched no peer, and lazily created
peers didn't accept inbound Transit IP sources.
Teach the route manager a per-peer set of extra allowed IPs, staged
by Mutation.SetExtraAllowedIPs. They appear in the outbound table
and in PeerAllowedIPs (so both outbound routing and per-peer allowed
source prefixes see them) but are excluded from the OS route set,
preserving the hook's contract that the extras reach WireGuard but
not the OS routing table. authReconfig now feeds the hook's results
into the route manager and incrementally syncs any changed peers to
the WireGuard device; the append to cfg.Peers remains only so Reconfig's
full per-peer device sync doesn't strip the extras from active
peers, and goes away with Config.Peers.
Updates #12542
Change-Id: I06c8fa30929fbf8fe171a2d34c47c6fcc3abfa16
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Engine.Reconfig previously diffed cfg.Peers disco keys against the
previous config to find restarted peers and flush their WireGuard
sessions, with a TSMP-learned-key map to suppress resets for key
changes that arrived over a working session. That was the last
per-peer state computed from wgcfg.Config.Peers inside the engine,
and it only ran on full reconfigs, so incremental netmap deltas
never got session resets at all.
Move the detection into nodeBackend, which sees every peer change:
full netmaps in SetNetMap and incremental upserts in
UpdateNetmapDelta both now report which peers changed disco keys,
with the same TSMP suppression and mismatch accounting as before.
LocalBackend acts on the result via a new Engine.ResetDevicePeer
method, which just removes the peer from the WireGuard device and
lets the peer lookup func lazily re-create it with fresh state.
LocalBackend.PatchDiscoKey now records TSMP-learned keys in
nodeBackend instead of forwarding to the engine, so the engine's
PatchDiscoKey method and tsmpLearnedDisco map are gone. The
controlclient patchDiscoKeyer interface becomes the exported
DiscoKeyUpdater so LocalBackend can compile-time assert that it
implements it, alongside its NetmapDeltaUpdater friends, replacing
the test that asserted the same of the engine.
This is one of the last steps toward removing Peers from wgcfg.Config.
Updates #12542
Change-Id: I6b42e460f42924816beae89ca43731cb91b66054
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
routerConfigLocked previously computed router.Config.Routes with
peerRoutes, a from-scratch pass over cfg.Peers on every reconfig.
The route manager already maintains the same set incrementally (ULA
and CGNAT coarsening included) and updateRouteManagerPrefs runs
earlier in authReconfig, so its OS route set is current by the time
the router config is built. Read it from there instead, and delete
peerRoutes and its tests; the routemanager package tests cover the
same behavior. This removes a consumer of cfg.Peers, which is on
its way out.
Updates #12542
Change-Id: I4a5b7a63d530e3fe1b70f0faf3f49def6a10be2e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Engine.PeerForIP was pure delegation to the callback that LocalBackend
installs via SetPeerForIPFunc, so external callers going through the
engine were taking a pointless round trip: LocalBackend called
b.e.PeerForIP, which called right back into LocalBackend, and the
netstack UseNetstackForIP hooks in tsnet and tailscaled did the same
dance one layer removed.
Export LocalBackend.PeerForIP and make those callers use it directly.
The engine-internal cold paths (Ping, TSMP disco advertisements,
pendopen diagnostics) still need the lookup and have no netmap of
their own, so SetPeerForIPFunc stays on the interface, but the lookup
method itself is now unexported and gone from the Engine interface.
In tailscaled the UseNetstackForIP hook moves from netstack setup to
just after the LocalBackend is created, since the backend doesn't
exist yet when netstack is wired up.
Updates #12542
Change-Id: Ib1e1a4fa5c84ee0dcb9ce5d1910047f2bab9453c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Previously, any peer added or removed by an incremental netmap delta
was only visible to wireguard-go after a full authReconfig: wgcfg's
ReconfigDevice re-installed a PeerLookupFunc closing over a freshly
built map of every peer's allowed IPs, doing O(n) work per change.
Instead, install the wireguard-go device hooks once, backed by live
state. Engine.SetPeerConfigFunc installs a single long-lived
PeerLookupFunc that queries LocalBackend's per-node RouteManager on
demand, and Engine.SyncDevicePeer does O(1) per-peer device sync
(remove, or update allowed IPs) as each delta mutation is applied.
Full reconfigs keep an O(n peers) device sync for now, but with no
lookup closure to reinstall and no removed-peer resurrection race; a
later change removes full-config peer syncing entirely.
The RouteManager's PeerAllowedIPs accessor backs the new hooks: its
sorted output makes unchanged state a no-op update, and its peer
filtering mirrors nmcfg.WGCfg, so expired peers and peers predating
both DERP and disco contribute no prefixes and thus cannot be lazily
created in the device, which matters because wireguard-go validates
inbound source IPs against per-peer allowed IPs.
The engine's SetPeerByIPPacketFunc callback is now authoritative when
installed, since LocalBackend's implementation covers subnet routes
and exit-node routes via the RouteManager's outbound table; the
engine's own reconfig-time BART table only serves engines running
without a LocalBackend.
The forced authReconfig on peer add/remove stays for now: the
WireGuard device no longer needs it, but OS routes, the quad-100
resolver's MagicDNS hosts map, and tstun's masquerade/jailed peer
config are still derived from the full peer set. Making those
delta-aware is the next step before gating it.
Updates #12542
Change-Id: I3ba8c7c324bca0ad0269279d03f53b1f17fb63a2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Give nodeBackend a RouteManager and keep it in sync as routing
inputs change: full netmaps resync the whole peer set (removals plus
no-op-cheap upserts), incremental netmap deltas mirror their peer
upserts and removes into the same mutation batch, and
authReconfigLocked pushes the routing-relevant prefs (exit node,
subnet route acceptance, OneCGNAT) after resolving the exit node's
stable ID to its current numeric node ID.
A selected exit node that doesn't resolve to a current peer (a
nonexistent node, or MDM's "auto:any" placeholder awaiting
resolution) is not the same as no exit node: per the long-standing
ipn.Prefs.ExitNodeID contract, it blackholes internet traffic rather
than letting it escape to the local network. RouteManager's Prefs
gains an ExitNodeSelected bit so its OS route set keeps the default
routes in that case, with no outbound peer to carry them, matching
what routerConfigLocked does today, as pinned by TestRouterConfigExitNodeBlackhole in the previous commit.
All mutations happen with nodeBackend.mu held, satisfying the
RouteManager's serialized Begin/Commit contract.
Nothing consumes its snapshots yet; the wgengine data plane and OS
router wiring come next.
Updates #12542
Change-Id: I677b6b2c9efb8e41b3d27071bd9db73e01640d3b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
LocalBackend.Start previously shut down the previous control client in
a goroutine, letting it run concurrently with the new one. An in-flight
lite map update carrying stale Hostinfo.RequestTags could then be
processed by the control plane after the new client had already changed
the node's tags. Control treats such a request as an invalid tag
transition and expires the node key to force a reauth, so retagging a
node with "tailscale up --advertise-tags" intermittently logged the
machine out.
Instead, detach the old client under b.mu and shut it down
synchronously with the lock released, before creating the new client.
Shutdown cancels the old client's in-flight requests and waits for its
goroutines to exit, so the cancellation of any stale update reaches the
server before the new client sends its first request. Per the deadlock
history in #18052, Shutdown must not be called with b.mu held; this
uses the same pattern as DisconnectControl.
Also teach the testcontrol server to model the control plane's tag
transition handling (including expiring the node key on an invalid
transition and ignoring updates from canceled requests), add an
integration test reproducing the race, and add an ipnlocal test
verifying that Start waits for the old client to shut down.
Updates #20365
Updates #18052
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: If8c8e145bdadcef1b1b8fe6209453cf5f5a8d616
Like the earlier RemoteConfig change, gate Hostinfo.AllowsUpdate on
feature.IsRegistered("clientupdate") in addition to the
buildfeatures.HasClientUpdate build-tag const. tsnet binaries don't
import feature/clientupdate even though ts_omit_clientupdate isn't
set, so they shouldn't tell control they can be remotely updated.
Add the previously missing feature.Register call to
feature/clientupdate, document the binary-support requirement on
tailcfg.Hostinfo.AllowsUpdate, and make tsnet's dep test verify it
doesn't depend on feature/clientupdate.
Updates #12614
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I526ef11f2a4141f5fce161b1f77263324014b5c4
The netmap.NetworkMap type is deprecated and going away, and
reconfigAppConnectorLocked only needed its SelfNode field anyway.
Take a tailcfg.NodeView instead and check its validity in place of
the old nil netmap check.
Updates #12542
Change-Id: Id617845b67416404500cca438ce4ac0372cd8a8e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
wgcfg.Config.NetworkLogging carried the network flow logging identity
inside the WireGuard config, where it was unrelated to WireGuard; it
lived there mainly so that identity changes would defeat Reconfig's
ErrNoChanges check and reach the netlog startup/shutdown logic.
Remove the field and move the whole netlog lifecycle into a new
feature/netlog package, installed on the engine via the new
wgengine.HookNewNetLogger hook, like other feature/* packages. The
logging identity now comes from LocalBackend's current netmap via the
widened NetLogSource interface (replacing Engine.SetNetLogNodeSource),
so nmcfg no longer parses audit log IDs into the config. The engine
still calls the hook before its ErrNoChanges return and before
router.Set (to capture initial packets), and again after router.Set
(to capture final packets), preserving the previous ordering.
Core wgengine no longer imports wgengine/netlog, so minimal builds
drop it entirely. tailscaled keeps netlog via feature/condregister,
and tsnet imports feature/condregister/netlog explicitly to keep
netlog enabled by default in tsnet-based binaries (tsidp,
k8s-operator).
This is pulled out of a future change that removes wgcfg.Config.Peers,
to make that PR smaller.
Updates #12542
Updates #12614
Change-Id: I41ca7dfe43c51e977c41b5f8e934bd1f0e6e6e24
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Add a new Prefs.RemoteConfig bool. When true, a c2n endpoint at
/remoteapi/localapi/* proxies into this node's LocalAPI at
/localapi/* with full read/write permission, giving the tailnet
admin the same API surface a local root/admin user has via the
tailscale CLI. All LocalAPI versions (v0, v1, ...) proxy through.
RemoteConfig is an alternative to Tailscale's default per-feature
double opt-in, in which both the tailnet admin and the local machine
owner must consent to each individual setting change. It is a single
client-side "I trust the tailnet admin" switch that, once on, hands
over full remote management of this node's settings and LocalAPI
without any further local prompt or confirmation.
This is only appropriate when the tailnet admin already owns the
machine (e.g. a corporate fleet device) or the local user has
explicitly delegated full control. It should never be enabled on a
personal/BYOD device with an untrusted tailnet admin. The trust
model is documented on the pref, on the hidden --remote-config CLI
flag, and on the feature/remoteconfig package.
The node advertises its RemoteConfig state to the control plane via
a new Hostinfo.RemoteConfig bool. This is only true when the feature
is both compiled in (buildfeatures.HasRemoteConfig) and its init
actually ran (feature.IsRegistered("remoteconfig")); tsnet builds
have the former but not the latter and correctly report false.
The handler lives in feature/remoteconfig and can be omitted with the
ts_omit_remoteconfig build tag. tsnet's TestDeps guards against
accidentally pulling it in.
Updates tailscale/corp#18043
Change-Id: I72ce10a90a0e4e738c72c940af3af64c986160b2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Found with the regex `\b([A-Za-z]+) \1\b`.
Updates #cleanup
Change-Id: I4cc51784d9b6437d3d0c66b531828707f87f7fd5
Signed-off-by: Alex Chan <alexc@tailscale.com>
Now that the routecheck subsystem is continuously collecting
reachability reports in the background, we can add a hook to
LocalBackend for fetching its report. That allows
suggestExitNodeUsingTrafficSteering to consult that report when
disqualifying candidates, instead of blocking on an immediate probe.
Exit node suggestions will only consult the report when the
`client-side-reachability` and `client-side-reachability-routecheck`
node attributes are both set on the current node.
Updates #17366
Updates tailscale/corp#33033
Signed-off-by: Simon Law <sfllaw@tailscale.com>
This adds the NotifyInitialPolicy watch option and the Policy field in
Notify so that clients can receive the effective policy snapshot via IPN
bus.
This extends policyclient.Client so ipnlocal can get and watch policy
snapshots, which is used by sysPolicyChanged to notify watchers.
User-scoped policy store registration, management, and cleanup will be
added in a follow-up
Updates tailscale/corp#42259
Signed-off-by: kari <kari@tailscale.com>
f5eac39ea ("feature/acme, ipn/ipnlocal: start moving ACME/cert state
into an extension") started to move the cert code into feature/acme
but was meant as a baby step.
This goes further, moving almost everything, leaving only some hooks
in ipnlocal.
When we later move "serve" support out to feature/serve, this will
look a bit different in that the hooks currently in ipnlocal will move
to feature/serve (cert support already depends on serve).
As part of this, cert-related tests move to feaure/acme too, which
means some test infra from ipnlocal now moves to shared ipnlocaltest.
(it's not big at the moment, but I imagine it growing)
Updates #12614
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I9ea89aa9754f12d54b81751b6bd830f2664241ff
Move all the FooForTest methods on LocalBackend to instead be
methods on a new unexported forTest type which is then given out
to callers in other packages via an exported ForTest method
(panicking in non-test contexts) that returns that unexported type.
This is unusual style (exported returning unexported) but declutters
godoc and makes call sites both more explicit and easier to read
without the "ForTest" suffix polluting the symbols. Now FooForTest()
changes into ForTest().Foo().
This was motivated by a pending change moving a bunch of code out of
LocalBackend into other packages that required adding more ForTest
methods to LocalBackend to keep the tests (now in other packages)
working. Instead, do this refactor now so the future change is prettier.
Updates #12614
Updates #cleanup
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: Ib25e6d76d48dc8622ac3a955e0b1220d582e63a8
WhoIs lookups for an IPv6-mapped IPv4 address such as
"::ffff:100.87.98.86" failed to match the node's canonical IPv4
address. Unmap the address before looking it up so these resolve.
Fixes#20235
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Signed-off-by: Bouke van der Bijl <i@bou.ke>
The ACME serialization mutex (acmeMu) was a package-level global, and
several ACME-related fields lived on LocalBackend even though the
cert code is conditional and not linked into every binary. With
multiple tsnet.Servers in one process (each its own LocalBackend),
a process-wide acmeMu also serialized unrelated backends.
Introduce a new feature/acme extension that owns the per-LocalBackend
ACME/cert state in an ipnlocal.CertState value:
- acmeMu, renewMu, renewCertAt (previously package globals)
- pendingACMETLSALPNCerts, pendingCertDomains{,Mu},
getCertForTest, certRefreshCancel (previously LocalBackend
fields, only meaningful when ACME was compiled in)
ipnlocal/cert.go now reaches the state through b.certState(), which
is routed by a feature.Hook installed at init by feature/acme. The
CertState type lives in ipnlocal so cert.go can access its fields
directly without a method explosion; the extension in feature/acme
constructs and owns it.
This is a baby step. The end goal is for the entire cert/ACME code
to live in feature/acme, with ipnlocal only retaining whatever thin
hooks the rest of LocalBackend needs to call into it. The current
split (CertState and most of cert.go in ipnlocal, extension wrapper
in feature/acme) is a deliberately temporary middle ground that
keeps this PR small while making the next moves mechanical.
The package is named feature/acme to match the existing HasACME /
ts_omit_acme naming. condregister/maybe_acme.go wires it in for
non-js builds.
Updates #12614
Updates #20248
Updates #20249
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I520909f24ad11a9622ef33c2290fe36ad44d6f71
setWebClientAtomicBoolLocked and setDebugLogsByCapabilityLocked
each only need the node capabilities to decide what to do, so
take a set.Set[tailcfg.NodeCapability] directly as part of
getting rid of netmap.NetworkMap.
Updates #12542
Change-Id: If7c30b6354fd42dfe82ed6d2e2fe3439de401315
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The engine only used the netmap to look up self addresses and the
self node's primary routes, so pass it the self node directly
rather than the whole netmap.
Updates #12542
Change-Id: I13c0028eed65d2177baf4cf6c449f5e441845a18
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
tsdial.Dialer.SetNetMap rebuilt an O(n peers) map of MagicDNS names on
every netmap change. As we move toward per-peer incremental deltas,
this becomes quadratic. This removes it and replaces it with
SetResolveMagicDNS, a callback into LocalBackend that looks up
hostnames from nodeBackend's new nodeByName index (populated alongside
nodeByAddr/nodeByKey on both full and delta paths). The index stores
both FQDNs and short names as keys.
This is the same treatment applied to netlog (8f210454d), wglog
(988b0905b), and drive (1d6989408): stop pushing *netmap.NetworkMap
into subsystems and instead have them pull from LocalBackend's live
data via callbacks.
Updates #12542
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I24557ab0c8a27636e08e4779bcfd3ec633db0a78
The logging added in 12188c0 was generating excessive spam in
backend logs. This may have been exacerbated by
tailscale GUI<->backend architecture on certain platforms like
Windows, where the GUI polls for exit node suggestions rather
than listening on the IPN bus.
Change this to log on error or if the current suggestion differs
from the previous suggestion.
Updates tailscale/corp#43691
Updates #20194
Signed-off-by: Amal Bansode <amal@tailscale.com>
userspaceEngine.PeerForIP read from e.netMap.Peers and
e.lastCfgFull.Peers, both of which go stale when peers arrive via
netmap deltas (which skip Engine.SetNetworkMap and Engine.Reconfig).
Every PeerForIP caller (Engine.Ping, the TSMP disco-key handler,
pendopen diagnostics, tsdial.Dialer.UseNetstackForIP, and
LocalBackend.GetPeerEndpointChanges) would report "no matching peer"
for freshly-added peers.
Fix it the same way SetPeerByIPPacketFunc fixed the outbound packet
hot path: have LocalBackend install a callback that reads the live
nodeBackend. nb.NodeByAddr is built from both SelfNode and Peers
(updateNodeByAddrLocked), so a single lookup covers the common case
with IsSelf set when the matched node ID is SelfNode's. The subnet-
route / exit-node-default-route slow path goes through a new
Engine.PeerKeyForIP that exposes the engine's AllowedIPs BART table
(the same table the outbound packet hot path already consults, with
exit-node selection honored), and resolves the matched key back to a
NodeView via the live nodeBackend.
Updates #12542
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I0d4b0d8997c8e796b7367c46b49b61d4fdc717b0
This applies the same treatment from PR #20162 (netlog) and
PR #20171 (wglog) to the local Taildrive filesystem wiring, ending the
per-netmap-update O(n) rebuild of the drive remotes list.
This moves the O(n peers) taildrive-remote list rebuild from every
peer change (which previously happened regardless of whether you were
even using taildrive) to instead happen only as needed.
That running on every netmap update and was a contributor to the
broader quadratic behavior we want to eliminate when a single peer is
added or removed.
Instead, this introduces drive.RemoteSource, a small interface the
Taildrive filesystem pulls from lazily on incoming WebDAV requests,
and caches by a generation counter. ipn/ipnlocal installs a
driveRemoteSource once at NewLocalBackend time and bumps
LocalBackend.driveGen on the three events that can actually flip the
drive-capable peer set: full netmap installs (domain + self caps),
UpdateNetmapDelta (peer add/remove or per-peer address changes), and
updatePacketFilter (since PeerCapability values are derived from the
packet filter rules, not from peer.CapMap).
The hook itself is kept but narrowed: it no longer takes a
*netmap.NetworkMap and its only remaining job is to re-notify IPN bus
listeners of the current local shares list on full installs.
This is a dependency to removing the netmap.NetworkMap type from
upstream callers, like wgengine.Engine in general.
(Also add a bunch more tests)
Updates #12542
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I7e3d2f5b4a9c8e1d6f0a3b7c9e2d4f8a1b6c5e9d
This applies the same treatment from 8f210454dd (netlog) to wglog,
ending use of netmap.NetworkMap and instead getting the canonical data
from LocalBackend/nodeBackend.
This is a dependency to removing the netmap.NetworkMap from
upstream callers, like wgengine.Engine in general.
Updates #12542
Change-Id: Icb5af0799322def048a6f594b49f7d11273f025d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
aa5da2e5f2 (in the 1.99.x dev series, unstable) introduced some bugs,
only some of which were later fixed. This fixed another. As of that
change, tkaFilterNetmapLocked ran only on full netmaps through
LocalBackend.setClientStatusLocked and not peer upserts via new or
changed peers. The later ae743642d9 fixed a regression in the
Engine layer but didn't fix the tkaFilter code from re-running on
upserts.
This add a tkaFilterDeltaMutsLocked pass before
nodeBackend.UpdateNetmapDelta. For each NodeMutationUpsert whose
peer fails the same signature check tkaFilterNetmapLocked applies,
rewrite the upsert in place into a NodeMutationRemove targeting the
same node ID, so magicsock's per-mutation dispatch and
nodeBackend.peers both drop the peer, matching the prior full-netmap
semantics.
New tsnet tests added:
- TestTailnetLockFiltersUnsignedDeltaPeer covers the new-peer
case.
- TestTailnetLockFiltersUnsignedDeltaPeerReplacement covers the
existing-peer-replacement case, to an empty signature.
- TestTailnetLockFiltersDeltaPeerWithInvalidSignature like above
but with a bogus signature.
Updates #12542
Updates tailscale/corp#43767
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: Ib35d0391541fee654867c26489847dbc5b7e2ae8
When recommending an exit node, suggestExitNodeLocked ranks candidates by
the latency to their home DERP region, taken from the most recent netcheck
report. But netcheck alternates between full reports, which probe every
region, and incremental reports, which only re-probe the home region and a
handful of the fastest regions. When the most recent report is incremental,
the suggestion fell back to a random for exit nodes that are far away.
Now we rank candidates against the best recent latency, tracked by the
`netcheck.Client` - the same data that is used to pick the preferred
DERP. It uses a history of measurements which includes a full netcheck
report, so should cover all DERP regions.
Updates tailscale/corp#17516
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
The Logger previously took a *netmap.NetworkMap at Startup and on every
ReconfigNetworkMap call, denormalizing it into per-IP and self lookup
maps. That denormalization is O(n) over all peers and ran on every
netmap update, contributing to the broader quadratic behavior we want
to eliminate when a single peer is added or removed.
Instead, this makes netlog ask LocalBackend (well, nodeBackend) for
the info it needs, letting us remove the netmap.NetworkMap type
entirely from the netlog package.
This is a dependency to removing the netmap.NetworkMap type from
upstream callers, like wgengine.Engine in general.
Updates #12542
Change-Id: Ib5f2de96e788a667332c0a6f7ac833b3d0053b5c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
ipnlocal.LocalBackend.populatePeerStatusLocked assumed that Hostinfo
was always valid, but that’s not always true, especially in tests.
ipnlocal.peerAPIPorts suffered from a similar assumption.
This patch checks for NodeView.Valid and Hostinfo.Valid; assuming the
zero value as a safe default.
Updates #8948
Updates #12542
Signed-off-by: Simon Law <sfllaw@tailscale.com>
The earlier aa5da2e5f2 made peer adds and removes through a netmap
delta path that mutates only nodeBackend, on the assumption that
PeerForIP, lookupPeerByIP, the engine's wireguard config
(e.lastCfgFull), the engine BART, wgdev's PeerLookupFunc closure, and
the engine's cached netmap (e.netMap) would all stay correct without
further updates. They don't. I'd totally forgotten that
Engine.PeerForIP has its own alternate IP-to-peer lookup codepath.
Concretely, all of these failed for a peer that arrived via
[tailcfg.MapResponse.PeersChanged] (and never via a full
[tailcfg.MapResponse.Peers] list):
- [wgengine.Engine.PeerForIP] read from e.netMap and e.lastCfgFull
(neither updated on the delta path) and so missed the new
peer. The rando non-data-plane callers (Ping, TSMP, pendopen,
debug endpoints, tsdial.Dialer.UseNetstackForIP for tsnet and
onlyNetstack tailscaled) all returned "no matching peer".
- The engine BART (built from e.lastCfgFull) missed the new peer's
subnet routes / exit-node default routes.
- wgdev's [device.PeerLookupFunc] closure (rebuilt only inside
wgcfg.ReconfigDevice) didn't have the new peer's noise key, so
outbound encryption to the new peer dropped the packet even when
SetPeerByIPPacketFunc returned the right NodePublic.
- And nothing in the delta path triggered NodeMutationRemove to
flow through to authReconfig either, so the same stale state
pointed at removed peers indefinitely.
So just (functionally) revert it for now, to have something easily
cherry-pickable to the 1.100 release branch. Proper fixes can come later
for the next release.
This also adds three new tests:
- TestPingPeerLearnedViaDelta runs disco and TSMP subtests over a
delta-added peer with only self addresses. disco exercises the
cold PeerForIP path (magicsock); TSMP exercises the full data path
through wgdev encryption. Both fail without this fix.
- TestPingSubnetRouteOfDeltaPeer exercises a subnet-router peer
arriving via delta. With s1 in --accept-routes mode, an IP
inside the advertised CIDR must resolve to s2 and a TSMP ping
must round-trip. Hits the BART + lastCfgFull + wgdev staleness
in one go.
- TestPingSelfReturnsIsLocalIP is a regression guard for the
IsSelf early-out in Engine.Ping. Passes on main today; included
here so future refactors of PeerForIP can't regress self
handling without test breakage.
Updates tailscale/corp#43394
Change-Id: I7a049271359bd73e7147ae9e2554e85614c2b8d2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Add an UpdatePeers method to the cache. This allows us to support netmap peer deltas,
by allowing just the peers to be updated in an existing cache. As a safety check, reject
an update if there was no base netmap data to apply a change to.
Then, when processing peer mutations in the backend, capture any changes that should
be applied to the cache and update it, if one is enabled.
Updates #12542
Change-Id: I2f8790a8fdc5e85fce6700ba4821a8cb10dddffa
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
Adds tailscaled_serve_{inbound,outbound}_bytes_total, labeled by Tailscale
Service name, by wrapping the peer-facing conn in tcpHandlerForVIPService.
Per-service counters persist for the process lifetime rather than being
evicted on serve-config changes.
Fixes#19572
Signed-off-by: Raj Singh <raj@tailscale.com>
Co-authored-by: Ethan Smith <ethan.smith@grafana.com>
Add NotifyInProcessNoDisconnect for in-process IPN bus subscribers that
must apply every bus update. When such a subscriber falls behind, block
Notify production instead of sending the terminal fell-behind message and
closing the watch.
This is intentionally not available over LocalAPI, where a slow or stuck
out-of-process client should still be disconnected rather than allowed to
stall tailscaled. In-process callers that use the bit must keep their
callbacks fast and must not call back into LocalBackend from the callback.
Updates #20062
Change-Id: I730ad61a07475243bb226fba2262c1a3ded211ae
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
New-style IPN bus subscribers consume stateful delta streams. Reject
NotifyRateLimit when it is combined with those subscription bits so
tailscaled cannot merge or delay messages that clients need to apply in
order.
Also stop silently dropping notifications when a watcher falls behind.
Remove the watcher, replace its stale queue with one terminal ErrMessage
notification, and close the watch.
Updates #20062
Change-Id: Id9d402ea76f4011cd23f122adf62f30dd4b6f90b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
magicsock de-duplicates NetInfo callbacks against c.netInfoLast, a cache
that lives on the long-lived magicsock.Conn. That cache survives a control
client swap (interactive login or profile switch), where only the control
client (and its own per-client NetInfo dedup) is replaced. As a result, the
first netcheck after the swap produces a structurally-identical NetInfo
(same PreferredDERP, same NAT shape), magicsock suppresses it as unchanged,
and the new control session never learns our home DERP. Peers can't reach
the node over DERP until some unrelated NetInfo field happens to change.
Add Conn.ResetNetInfoLast to clear the dedup cache, and call it from
LocalBackend.setControlClientLocked whenever a control client is installed,
so the next netcheck re-reports the current NetInfo to the new client.
netInfoLast is only a dedup/optimization cache (all readers nil-guard, and
it is recomputed by every netcheck), so clearing it can only add a delivery,
never lose or misroute one; it is scoped to control-client lifecycle events,
not steady-state operation.
Updates #17887Fixes#20024
Signed-off-by: Mike O'Driscoll <mikeo@tailscale.com>
Commit 2b338dd6a8 removed watchdogEngine because it was weird
(so many methods) and increasingly unnecessary after we'd cleaned up
and simplified so much of the locking.
This adds back a watchdog, but an easier to maintain one that's more
idiomatic.
Updates #19759
Change-Id: I86c458473e126c0809f37696446ce7acf4cc4eb9
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The Tailscale daemon only refreshed TLS certs as a side effect of inbound
TLS handshakes or "tailscale cert" CLI calls. A node that doesn't see
inbound traffic during the renewal window silently rolls past expiry.
Add a once-per-hour background loop on LocalBackend that enumerates Serve
and Funnel HTTPS hostnames (filtered against the netmap's CertDomains so
we don't poke ACME for other nodes' service hostnames) and calls the
existing GetCertPEM path. The renewal decision (ARI window, then 2/3
expiry fallback) is unchanged; the loop just guarantees it runs.
For visibility during initial issuance or restart with a long-expired
cached cert, add a "tls-cert-pending" health Warnable that's set while
ACME is in flight and no usable cached cert exists. Async renewal of a
still-valid cert intentionally doesn't fire it. And then make the CLI "cert"
subcommand print out a warning if it's blocking due to a cert fetch
in flight, using that health info.
Fixes#19911Fixes#19912
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I144e46c40e957b2e879587decace32a523a6eade
The routecheck package parallels the netcheck package, where the
former checks routes and routers while the latter checks networks.
Like netcheck, it compiles reports for other systems to consume.
Historically, the client has never known whether a peer is actually
reachable. Most of the time this doesn’t matter, since the client will
want to establish a WireGuard tunnel to any given destination.
However, if the client needs to choose between two or more nodes,
then it should try to choose a node that it can reach.
Suggested exit nodes are one such example, where the client filters
out any nodes that aren’t connected to the control plane. Sometimes an
exit node will get disconnected from the control plane: when the
network between the two is unreliable or when the exit node is too
busy to keep its control connection alive. In these cases, Control
disables the Node.Online flag for the exit node and broadcasts this
across the tailnet. Arguably, the client should never have relied on
this flag, since it only makes sense in the admin console.
This patch implements an initial routecheck client that can probe
every node that your client knows about. You should not ping scan your
visible tailnet, this method is for debugging only.
This patch also introduces a new OnNetMapToggle hook, which fires when
the netmap transitions from nil to non-nil, or vice versa. This
happens either when the client receives its first MapResponse after
connecting to the control plane, or when it clears the netmap while it
is disconnecting. Routecheck uses this to wait for a valid netmap
so it knows which peers to probe.
Updates #17366
Updates tailscale/corp#33033
Signed-off-by: Simon Law <sfllaw@tailscale.com>
This adds tsnet.Server.ListenSSH which, if the SSH feature is linked,
returns a net.Listener whose Accept yields *tailssh.Session values (as
net.Conn). This lets tsnet apps accept incoming SSH connections to
implement custom TUI applications.
Basic apps can use net.Conn directly (Read/Write/Close). Rich apps
import ssh/tailssh and type-assert for peer identity, PTY, signals,
etc. If feature/ssh isn't imported, ListenSSH returns an error.
Includes a demo guess-the-number game in tsnet/example/ssh-game.
Updates tailscale/corp#37839
Change-Id: I4e7c3c96afb030cdf4da8f2d8b2253820628129a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
