This compares the warnings we actually care about and skips the unstable
warnings and the changes with no warnings.
Fixes#17635
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
Extend Persist with AttestationKey to record a hardware-backed
attestation key for the node's identity.
Add a flag to tailscaled to allow users to control the use of
hardware-backed keys to bind node identity to individual machines.
Updates tailscale/corp#31269
Change-Id: Idcf40d730a448d85f07f1bebf387f086d4c58be3
Signed-off-by: Patrick O'Doherty <patrick@tailscale.com>
Add and wire up event publishers for these two event types in the AppConnector.
Nothing currently subscribes to them, so this is harmless. Subscribers for
these events will be added in a near-future commit.
As part of this, move the appc.RouteInfo type to the types/appctype package.
It does not contain any package-specific details from appc. Beside it, add
appctype.RouteUpdate to carry route update event state, likewise not specific
to appc. Update all usage of the appc.* types throughout to use appctype.*
instead, and update depaware files to reflect these changes.
Add a Close method to the AppConnector to make sure the client gets cleaned up
when the connector is dropped (we re-create connectors).
Update the unit tests in the appc package to also check the events published
alongside calls to the RouteAdvertiser.
For now the tests still rely on the RouteAdvertiser for correctness; this is OK
for now as the two methods are always performed together. In the near future,
we need to rework the tests so not require that, but that will require building
some more test fixtures that we can handle separately.
Updates #15160
Updates #17192
Change-Id: I184670ba2fb920e0d2cb2be7c6816259bca77afe
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
depaware was merging golang.org/x/foo and std's
vendor/golang.org/x/foo packages (which could both be in the binary!),
leading to confusing output, especially when I was working on
eliminating duplicate packages imported under different names.
This makes the depaware output longer and grosser, but doesn't hide
reality from us.
Updates #17305
Change-Id: I21cc3418014e127f6c1a81caf4e84213ce84ab57
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Saves 139 KB.
Also Synology support, which I saw had its own large-ish proxy parsing
support on Linux, but support for proxies without Synology proxy
support is reasonable, so I pulled that out as its own thing.
Updates #12614
Change-Id: I22de285a3def7be77fdcf23e2bec7c83c9655593
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Allow the user to access information about routes an app connector has
learned, such as how many routes for each domain.
Fixestailscale/corp#32624
Signed-off-by: Fran Bull <fran@tailscale.com>
Now cmd/derper doesn't depend on iptables, nftables, and netlink code :)
But this is really just a cleanup step I noticed on the way to making
tsnet applications able to not link all the OS router code which they
don't use.
Updates #17313
Change-Id: Ic7b4e04e3a9639fd198e9dbeb0f7bae22a4a47a9
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
PR #17258 extracted `derp.Server` into `derp/derpserver.Server`.
This followup patch adds the following cleanups:
1. Rename `derp_server*.go` files to `derpserver*.go` to match
the package name.
2. Rename the `derpserver.NewServer` constructor to `derpserver.New`
to reduce stuttering.
3. Remove the unnecessary `derpserver.Conn` type alias.
Updates #17257
Updates #cleanup
Signed-off-by: Simon Law <sfllaw@tailscale.com>
This exports a number of things from the derp (generic + client) package
to be used by the new derpserver package, as now used by cmd/derper.
And then enough other misc changes to lock in that cmd/tailscaled can
be configured to not bring in tailscale.com/client/local. (The webclient
in particular, even when disabled, was bringing it in, so that's now fixed)
Fixes#17257
Change-Id: I88b6c7958643fb54f386dd900bddf73d2d4d96d5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
* cmd/tailscale/cli: use client/local instead of deprecated client/tailscale
Updates tailscale/corp#22748
Signed-off-by: Alex Chan <alexc@tailscale.com>
* derp: use client/local instead of deprecated client/tailscale
Updates tailscale/corp#22748
Signed-off-by: Alex Chan <alexc@tailscale.com>
---------
Signed-off-by: Alex Chan <alexc@tailscale.com>
This is step 4 of making syspolicy a build-time feature.
This adds a policyclient.Get() accessor to return the correct
implementation to use: either the real one, or the no-op one. (A third
type, a static one for testing, also exists, so in general a
policyclient.Client should be plumbed around and not always fetched
via policyclient.Get whenever possible, especially if tests need to use
alternate syspolicy)
Updates #16998
Updates #12614
Change-Id: Iaf19670744a596d5918acfa744f5db4564272978
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Step 3 in the series. See earlier cc532efc20 and d05e6dc09e.
This step moves some types into a new leaf "ptype" package out of the
big "settings" package. The policyclient.Client will later get new
methods to return those things (as well as Duration and Uint64, which
weren't done at the time of the earlier prototype).
Updates #16998
Updates #12614
Change-Id: I4d72d8079de3b5351ed602eaa72863372bd474a2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This is step 2 of ~4, breaking up #14720 into reviewable chunks, with
the aim to make syspolicy be a build-time configurable feature.
Step 1 was #16984.
In this second step, the util/syspolicy/policyclient package is added
with the policyclient.Client interface. This is the interface that's
always present (regardless of build tags), and is what code around the
tree uses to ask syspolicy/MDM questions.
There are two implementations of policyclient.Client for now:
1) NoPolicyClient, which only returns default values.
2) the unexported, temporary 'globalSyspolicy', which is implemented
in terms of the global functions we wish to later eliminate.
This then starts to plumb around the policyclient.Client to most callers.
Future changes will plumb it more. When the last of the global func
callers are gone, then we can unexport the global functions and make a
proper policyclient.Client type and constructor in the syspolicy
package, removing the globalSyspolicy impl out of tsd.
The final change will sprinkle build tags in a few more places and
lock it in with dependency tests to make sure the dependencies don't
later creep back in.
Updates #16998
Updates #12614
Change-Id: Ib2c93d15c15c1f2b981464099177cd492d50391c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This is step 1 of ~3, breaking up #14720 into reviewable chunks, with
the aim to make syspolicy be a build-time configurable feature.
In this first (very noisy) step, all the syspolicy string key
constants move to a new constant-only (code-free) package. This will
make future steps more reviewable, without this movement noise.
There are no code or behavior changes here.
The future steps of this series can be seen in #14720: removing global
funcs from syspolicy resolution and using an interface that's plumbed
around instead. Then adding build tags.
Updates #12614
Change-Id: If73bf2c28b9c9b1a408fe868b0b6a25b03eeabd1
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The caller of client.RunWatchConnectionLoop may need to be
aware of errors that occur within loop. Add a channel
that notifies of errors to the caller to allow for
decisions to be make as to the state of the client.
Updates tailscale/corp#25756
Signed-off-by: Mike O'Driscoll <mikeo@tailscale.com>
This means the caller does not have to remember to close the reader, and avoids
having to duplicate the logic to decode JSON into events.
Updates #15160
Change-Id: I20186fabb02f72522f61d5908c4cc80b86b8936b
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
Add mesh key support to derpprobe for
probing derpers with verify set to true.
Move MeshKey checking to central point for code reuse.
Fix a bad error fmt msg.
Fixestailscale/corp#27294Fixestailscale/corp#25756
Signed-off-by: Mike O'Driscoll <mikeo@tailscale.com>
Using WINHTTP_AUTOPROXY_ALLOW_AUTOCONFIG on Windows versions older than Windows 10 1703 (build 15063)
is not supported and causes WinHttpGetProxyForUrl to fail with ERROR_INVALID_PARAMETER. This results in failures
reaching the control on environments where a proxy is required.
We use wingoes version detection to conditionally set the WINHTTP_AUTOPROXY_ALLOW_AUTOCONFIG flag
on Windows builds greater than 15063.
While there, we also update proxy detection to use WINHTTP_AUTO_DETECT_TYPE_DNS_A, as DNS-based proxy discovery
might be required with Active Directory and in certain other environments.
Updates tailscale/corp#29168
Fixes#879
Signed-off-by: Nick Khyl <nickk@tailscale.com>
To authenticate mesh keys, the DERP servers used a simple == comparison,
which is susceptible to a side channel timing attack.
By extracting the mesh key for a DERP server, an attacker could DoS it
by forcing disconnects using derp.Client.ClosePeer. They could also
enumerate the public Wireguard keys, IP addresses and ports for nodes
connected to that DERP server.
DERP servers configured without mesh keys deny all such requests.
This patch also extracts the mesh key logic into key.DERPMesh, to
prevent this from happening again.
Security bulletin: https://tailscale.com/security-bulletins#ts-2025-003Fixestailscale/corp#28720
Signed-off-by: Simon Law <sfllaw@tailscale.com>
This fixes the implementation and test from #15208 which apparently
never worked.
Ignore the metacert when counting the number of expected certs
presented.
And fix the test, pulling out the TLSConfig setup code into something
shared between the real cmd/derper and the test.
Fixes#15579
Change-Id: I90526e38e59f89b480629b415f00587b107de10a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We were missing this metric, but it can be important for some workloads.
Varz memstats output allocation cost reduced from 30 allocs per
invocation to 1 alloc per invocation.
Updates tailscale/corp#28033
Signed-off-by: James Tucker <james@tailscale.com>
Co-authored-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This adds netx.DialFunc, unifying a type we have a bazillion other
places, giving it now a nice short name that's clickable in
editors, etc.
That highlighted that my earlier move (03b47a55c7) of stuff from
nettest into netx moved too much: it also dragged along the memnet
impl, meaning all users of netx.DialFunc who just wanted netx for the
type definition were instead also pulling in all of memnet.
So move the memnet implementation netx.Network into memnet, a package
we already had.
Then use netx.DialFunc in a bunch of places. I'm sure I missed some.
And plenty remain in other repos, to be updated later.
Updates tailscale/corp#27636
Change-Id: I7296cd4591218e8624e214f8c70dab05fb884e95
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Allows the use of tsweb without pulling in all of the heavy prometheus
client libraries, protobuf and so on.
Updates #15160
Signed-off-by: David Anderson <dave@tailscale.com>
For people who can't use LetsEncrypt because it's banned.
Per https://github.com/tailscale/tailscale/issues/11776#issuecomment-2520955317
This does two things:
1) if you run derper with --certmode=manual and --hostname=$IP_ADDRESS
we previously permitted, but now we also:
* auto-generate the self-signed cert for you if it doesn't yet exist on disk
* print out the derpmap configuration you need to use that
self-signed cert
2) teaches derp/derphttp's derp dialer to verify the signature of
self-signed TLS certs, if so declared in the existing
DERPNode.CertName field, which previously existed for domain fronting,
separating out the dial hostname from how certs are validates,
so it's not overloaded much; that's what it was meant for.
Fixes#11776
Change-Id: Ie72d12f209416bb7e8325fe0838cd2c66342c5cf
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
* go.toolchain.branch: update to Go 1.24
Updates #15015
Change-Id: I29c934ec17e60c3ac3264f30fbbe68fc21422f4d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
* cmd/testwrapper: fix for go1.24
Updates #15015
Signed-off-by: Paul Scott <paul@tailscale.com>
* go.mod,Dockerfile: bump to Go 1.24
Also bump golangci-lint to a version that was built with 1.24
Updates #15015
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
---------
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Signed-off-by: Paul Scott <paul@tailscale.com>
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Co-authored-by: Paul Scott <paul@tailscale.com>
Co-authored-by: Andrew Lytvynov <awly@tailscale.com>
There's nothing about it on
https://github.com/multipath-tcp/mptcp_net-next/issues/ but empirically
MPTCP doesn't support this option on awly's kernel 6.13.2 and in GitHub
actions.
Updates #15015
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Incorrect disabled support for not having a mesh key in
d5316a4fbb
Allow for no mesh key to be set.
Fixes#14928
Signed-off-by: Mike O'Driscoll <mikeo@tailscale.com>
Since dynamic reload of setec is not supported
in derper at this time, close the server after
the secret is loaded.
Updates tailscale/corp#25756
Signed-off-by: Mike O'Driscoll <mikeo@tailscale.com>
It was moved in f57fa3cbc3.
Updates tailscale/corp#22748
Change-Id: I19f965e6bded1d4c919310aa5b864f2de0cd6220
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
A previous PR accidentally logged the key as part
of an error. Remove logging of the key.
Add log print for Setec store steup.
Updates tailscale/corp#25756
Signed-off-by: Mike O'Driscoll <mikeo@tailscale.com>
Add setec secret support for derper.
Support dev mode via env var, and setec via secrets URL.
For backwards compatibility use setec load from file also.
Updates tailscale/corp#25756
Signed-off-by: Mike O'Driscoll <mikeo@tailscale.com>
The hiding of internal packages has hidden things I wanted to see a
few times now. Stop hiding them. This makes depaware.txt output a bit
longer, but not too much. Plus we only really look at it with diffs &
greps anyway; it's not like anybody reads the whole thing.
Updates #12614
Change-Id: I868c89eeeddcaaab63e82371651003629bc9bda8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The timeout still defaults to 2 seconds, but can now be changed via command-line flag.
Updates tailscale/corp#26045
Signed-off-by: Percy Wegmann <percy@tailscale.com>
We previously baked in the LetsEncrypt x509 root CA for our tlsdial
package.
This moves that out into a new "bakedroots" package and is now also
shared by ipn/ipnlocal's cert validation code (validCertPEM) that
decides whether it's time to fetch a new cert.
Otherwise, a machine without LetsEncrypt roots locally in its system
roots is unable to use tailscale cert/serve and fetch certs.
Fixes#14690
Change-Id: Ic88b3bdaabe25d56b9ff07ada56a27e3f11d7159
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Brad Fitzpatrick
Claus Lensbøl
Patrick O'Doherty
M. J. Fromberger
Fran Bull
Simon Law
Jordan Whited
Alex Chan
Andrew Lytvynov
Mike O'Driscoll
Nick Khyl
James Tucker
David Anderson
Percy Wegmann
Irbe Krumina