This updates the syspolicy.LogSCMInteractions check to run at the time of an interaction,
just before logging a message, instead of during service startup. This ensures the most
recent policy setting is used if it has changed since the service started.
Updates #12687
Signed-off-by: Nick Khyl <nickk@tailscale.com>
In this PR, we move the syspolicy.FlushDNSOnSessionUnlock check from service startup
to when a session change notification is received. This ensures that the most recent policy
setting value is used if it has changed since the service started.
We also plan to handle session change notifications for unrelated reasons
and need to decouple notification subscriptions from DNS anyway.
Updates #12687
Updates tailscale/corp#18342
Signed-off-by: Nick Khyl <nickk@tailscale.com>
containerboot:
Adds 3 new environment variables for containerboot, `TS_LOCAL_ADDR_PORT` (default
`"${POD_IP}:9002"`), `TS_METRICS_ENABLED` (default `false`), and `TS_DEBUG_ADDR_PORT`
(default `""`), to configure metrics and debug endpoints. In a follow-up PR, the
health check endpoint will be updated to use the `TS_LOCAL_ADDR_PORT` if
`TS_HEALTHCHECK_ADDR_PORT` hasn't been set.
Users previously only had access to internal debug metrics (which are unstable
and not recommended) via passing the `--debug` flag to tailscaled, but can now
set `TS_METRICS_ENABLED=true` to expose the stable metrics documented at
https://tailscale.com/kb/1482/client-metrics at `/metrics` on the addr/port
specified by `TS_LOCAL_ADDR_PORT`.
Users can also now configure a debug endpoint more directly via the
`TS_DEBUG_ADDR_PORT` environment variable. This is not recommended for production
use, but exposes an internal set of debug metrics and pprof endpoints.
operator:
The `ProxyClass` CRD's `.spec.metrics.enable` field now enables serving the
stable user metrics documented at https://tailscale.com/kb/1482/client-metrics
at `/metrics` on the same "metrics" container port that debug metrics were
previously served on. To smooth the transition for anyone relying on the way the
operator previously consumed this field, we also _temporarily_ serve tailscaled's
internal debug metrics on the same `/debug/metrics` path as before, until 1.82.0
when debug metrics will be turned off by default even if `.spec.metrics.enable`
is set. At that point, anyone who wishes to continue using the internal debug
metrics (not recommended) will need to set the new `ProxyClass` field
`.spec.statefulSet.pod.tailscaleContainer.debug.enable`.
Users who wish to opt out of the transitional behaviour, where enabling
`.spec.metrics.enable` also enables debug metrics, can set
`.spec.statefulSet.pod.tailscaleContainer.debug.enable` to false (recommended).
Separately but related, the operator will no longer specify a host port for the
"metrics" container port definition. This caused scheduling conflicts when k8s
needs to schedule more than one proxy per node, and was not necessary for allowing
the pod's port to be exposed to prometheus scrapers.
Updates #11292
---------
Co-authored-by: Kristoffer Dalby <kristoffer@tailscale.com>
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
A small follow-up to #14112- ensures that the operator itself can emit
Events for its kube state store changes.
Updates tailscale/tailscale#14080
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Otherwise we'll see a panic if we hit the dnsfallback code and try to
call NewDialer with a nil NetMon.
Updates #14161
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I81c6e72376599b341cb58c37134c2a948b97cf5f
So we can locate them in logs more easily.
Updates tailscale/corp#24721
Change-Id: Ia766c75608050dde7edc99835979a6e9bb328df2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This is a follow-up to #14112 where our internal kube client was updated
to allow it to emit Events - this updates our sample kube manifests
and tsrecorder manifest templates so they can benefit from this functionality.
Updates tailscale/tailscale#14080
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Adds functionality to kube client to emit Events.
Updates kube store to emit Events when tailscaled state has been loaded, updated or if any errors where
encountered during those operations.
This should help in cases where an error related to state loading/updating caused the Pod to crash in a loop-
unlike logs of the originally failed container instance, Events associated with the Pod will still be
accessible even after N restarts.
Updates tailscale/tailscale#14080
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Limit spamming GUIs with boring updates to once in 3 seconds, unless
the notification is relatively interesting and the GUI should update
immediately.
This is basically @barnstar's #14119 but with the logic moved to be
per-watch-session (since the bit is per session), rather than
globally. And this distinguishes notable Notify messages (such as
state changes) and makes them send immediately.
Updates tailscale/corp#24553
Change-Id: I79cac52cce85280ce351e65e76ea11e107b00b49
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We currently annotate pods with a hash of the tailscaled config so that
we can trigger pod restarts whenever it changes. However, the hash
updates more frequently than is necessary causing more restarts than is
necessary. This commit removes two causes; scaling up/down and removing
the auth key after pods have initially authed to control. However, note
that pods will still restart on scale-up/down because of the updated set
of volumes mounted into each pod. Hopefully we can fix that in a planned
follow-up PR.
Updates #13406
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
This gets close to all of the remaining ones.
Updates #12912
Change-Id: I9c672bbed2654a6c5cab31e0cbece6c107d8c6fa
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Or unless the new "ts_debug_websockets" build tag is set.
Updates #1278
Change-Id: Ic4c4f81c1924250efd025b055585faec37a5491d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Otherwise all the clients only using control/controlhttp for the
ts2021 HTTP client were also pulling in WebSocket libraries, as the
server side always needs to speak websockets, but only GOOS=js clients
speak it.
This doesn't yet totally remove the websocket dependency on Linux because
Linux has a envknob opt-in to act like GOOS=js for manual testing and force
the use of WebSockets for DERP only (not control). We can put that behind
a build tag in a future change to eliminate the dep on all GOOSes.
Updates #1278
Change-Id: I4f60508f4cad52bf8c8943c8851ecee506b7ebc9
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Some environments would like to remove Tailscale SSH support for the
binary for various reasons when not needed (either for peace of mind,
or the ~1MB of binary space savings).
Updates tailscale/corp#24454
Updates #1278
Updates #12614
Change-Id: Iadd6c5a393992c254b5dc9aa9a526916f96fd07a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Sets a custom hostinfo app type for ProxyGroup replicas, similarly
to how we do it for all other Kubernetes Operator managed components.
Updates tailscale/tailscale#13406,tailscale/corp#22920
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
- Basic description of DERP
If configured to do so, also show
- Mailto link to security@tailscale.com
- Link to Tailscale Security Policies
- Link to Tailscale Acceptable Use Policy
Updates tailscale/corp#24092
Signed-off-by: Percy Wegmann <percy@tailscale.com>
This adds a new generic result type (motivated by golang/go#70084) to
try it out, and uses it in the new lineutil package (replacing the old
lineread package), changing that package to return iterators:
sometimes over []byte (when the input is all in memory), but sometimes
iterators over results of []byte, if errors might happen at runtime.
Updates #12912
Updates golang/go#70084
Change-Id: Iacdc1070e661b5fb163907b1e8b07ac7d51d3f83
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Thanks to @davidbuzz for raising the issue in #13973.
Fixes#8272Fixes#13973
Change-Id: Ic413e14d34c82df3c70a97e591b90316b0b4946b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
A filesystem was plumbed into netstack in 993acf4475
but hasn't been used since 2d5d6f5403. Remove it.
Noticed while rebasing a Tailscale fork elsewhere.
Updates tailscale/corp#16827
Change-Id: Ib76deeda205ffe912b77a59b9d22853ebff42813
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In this PR, we add the tailscale syspolicy command with two subcommands: list, which displays
policy settings, and reload, which forces a reload of those settings. We also update the LocalAPI
and LocalClient to facilitate these additions.
Updates #12687
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Now when we have HA for egress proxies, it makes sense to support topology
spread constraints that would allow users to define more complex
topologies of how proxy Pods need to be deployed in relation with other
Pods/across regions etc.
Updates tailscale/tailscale#13406
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
- `tailscale metrics print`: to show metric values in console
- `tailscale metrics write`: to write metrics to a file (with a tempfile
& rename dance, which is atomic on Unix).
Also, remove the `TS_DEBUG_USER_METRICS` envknob as we are getting
more confident in these metrics.
Updates tailscale/corp#22075
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
In this PR, we update the syspolicy package to utilize syspolicy/rsop under the hood,
and remove syspolicy.CachingHandler, syspolicy.windowsHandler and related code
which is no longer used.
We mark the syspolicy.Handler interface and RegisterHandler/SetHandlerForTest functions
as deprecated, but keep them temporarily until they are no longer used in other repos.
We also update the package to register setting definitions for all existing policy settings
and to register the Registry-based, Windows-specific policy stores when running on Windows.
Finally, we update existing internal and external tests to use the new API and add a few more
tests and benchmarks.
Updates #12687
Signed-off-by: Nick Khyl <nickk@tailscale.com>
This allows us to print the time that a netcheck was run, which is
useful in debugging.
Updates #10972
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Id48d30d4eb6d5208efb2b1526a71d83fe7f9320b
It had bit-rotted likely during the transition to vector io in
76389d8baf. Tested on Ubuntu 24.04
by creating a netns and doing the DHCP dance to get an IP.
Updates #2589
Signed-off-by: Maisem Ali <maisem@tailscale.com>
In f77821fd63 (released in v1.72.0), we made the client tell a DERP server
when the connection was not its ideal choice (the first node in its region).
But we didn't do anything with that information until now. This adds a
metric about how many such connections are on a given derper, and also
adds a bit to the PeerPresentFlags bitmask so watchers can identify
(and rebalance) them.
Updates tailscale/corp#372
Change-Id: Ief8af448750aa6d598e5939a57c062f4e55962be
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Updates tailscale/tailscale#13839
Adds a new blockblame package which can detect common MITM SSL certificates used by network appliances. We use this in `tlsdial` to display a dedicated health warning when we cannot connect to control, and a network appliance MITM attack is detected.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
Adds logic to `checkExitNodePrefsLocked` to return an error when
attempting to use exit nodes on a platform where this is not supported.
This mirrors logic that was added to error out when trying to use `ssh`
on an unsupported platform, and has very similar semantics.
Fixes https://github.com/tailscale/tailscale/issues/13724
Signed-off-by: Mario Minardi <mario@tailscale.com>
* updates to LocalBackend require metrics to be passed in which are now initialized
* os.MkdirTemp isn't supported in wasm/js so we simply return empty
string for logger
* adds a UDP dialer which was missing and led to the dialer being
incompletely initialized
Fixes#10454 and #8272
Signed-off-by: Christian <christian@devzero.io>
For a customer that wants to run their own DERP prober, let's add a
/healthz endpoint that can be used to monitor derpprobe itself.
Updates #6526
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Iba315c999fc0b1a93d8c503c07cc733b4c8d5b6b
This helps better distinguish what is generating activity to the
Tailscale public API.
Updates tailscale/corp#23838
Signed-off-by: Percy Wegmann <percy@tailscale.com>
We were using google/uuid in two places and that brought in database/sql/driver.
We didn't need it in either place.
Updates #13760
Updates tailscale/corp#20099
Change-Id: Ieed32f1bebe35d35f47ec5a2a429268f24f11f1f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
cmd/k8s-operator,k8s-operator/apis: set a readiness condition on egress Services
Set a readiness condition on ExternalName Services that define a tailnet target
to route cluster traffic to via a ProxyGroup's proxies. The condition
is set to true if at least one proxy is currently set up to route.
Updates tailscale/tailscale#13406
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
We don't need to error out and continuously reconcile if ProxyClass
has not (yet) been created, once it gets created the ProxyGroup
reconciler will get triggered.
Updates tailscale/tailscale#13406
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Ensure that .status.podIPs is used to select Pod's IP
in all reconcilers.
Updates tailscale/tailscale#13406
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Nick Khyl
Irbe Krumina
Tom Proctor
Andrea Gottardo
Andrew Dunham
Brad Fitzpatrick
James Stocker
Percy Wegmann
Anton Tolchanov
Nick Kirby
Paul Scott
Maisem Ali
Naman Sood
Mario Minardi
Christian