If the GUI receives a new exit node ID before the new netmap, it may treat the node as offline or invalid
if the previous netmap didn't include the peer at all, or if the peer was offline or not advertised as an exit node.
This may result in briefly issuing and dismissing a warning, or a similar issue, which isn't ideal.
In this PR, we change the operation order to send the new netmap to clients first before selecting the new exit node
and notifying them of the Exit Node change.
Updates tailscale/corp#30252 (an old issue discovered during testing this)
Signed-off-by: Nick Khyl <nickk@tailscale.com>
We already check this for cases where ipn.Prefs.AutoExitNode is configured via syspolicy.
Configuring it directly through EditPrefs should behave the same, so we add a test for that as well.
Additionally, we clarify the implementation and future extensibility in (*LocalBackend).resolveAutoExitNodeLocked,
where the AutoExitNode is actually enforced.
Updates tailscale/corp#29969
Updates #cleanup
Signed-off-by: Nick Khyl <nickk@tailscale.com>
So it can be used from the CLI without importing ipnlocal.
While there, also remove isAutoExitNodeID, a wrapper around parseAutoExitNodeID
that's no longer used.
Updates tailscale/corp#29969
Updates #cleanup
Signed-off-by: Nick Khyl <nickk@tailscale.com>
When the policy setting is enabled, it allows users to override the exit node enforced by the ExitNodeID
or ExitNodeIP policy. It's primarily intended for use when ExitNodeID is set to auto:any, but it can also
be used with specific exit nodes. It does not allow disabling exit node usage entirely.
Once the exit node policy is overridden, it will not be enforced again until the policy changes,
the user connects or disconnects Tailscale, switches profiles, or disables the override.
Updates tailscale/corp#29969
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Now that applySysPolicy is only called by (*LocalBackend).reconcilePrefsLocked,
we can make it a method to avoid passing state via parameters and to support
future extensibility.
Also factor out exit node-specific logic into applyExitNodeSysPolicyLocked.
Updates tailscale/corp#29969
Signed-off-by: Nick Khyl <nickk@tailscale.com>
We extract checkEditPrefsAccessLocked, adjustEditPrefsLocked, and onEditPrefsLocked from the EditPrefs
execution path, defining when each step is performed and what behavior is allowed at each stage.
Currently, this is primarily used to support Always On mode, to handle the Exit Node enablement toggle,
and to report prefs edit metrics.
We then use it to enforce Exit Node policy settings by preventing users from setting an exit node
and making EditPrefs return an error when an exit node is restricted by policy. This enforcement is also
extended to the Exit Node toggle.
These changes prepare for supporting Exit Node overrides when permitted by policy and preventing logout
while Always On mode is enabled.
In the future, implementation of these methods can be delegated to ipnext extensions via the feature hooks.
Updates tailscale/corp#29969
Updates tailscale/corp#26249
Signed-off-by: Nick Khyl <nickk@tailscale.com>
We have several places where we call applySysPolicy, suggestExitNodeLocked, and setExitNodeID.
While there are cases where we want to resolve the exit node specifically, such as when network
conditions change or a new netmap is received, we typically need to perform all three steps.
For example, enforcing policy settings may enable auto exit nodes or set an ExitNodeIP,
which in turn requires picking a suggested exit node or resolving the IP to an ID, respectively.
In this PR, we introduce (*LocalBackend).resolveExitNodeInPrefsLocked and (*LocalBackend).reconcilePrefsLocked,
with the latter calling both applySysPolicy and resolveExitNodeInPrefsLocked.
Consolidating these steps into a single extensibility point would also make it easier to support
future hooks registered by ipnext extensions.
Updates tailscale/corp#29969
Signed-off-by: Nick Khyl <nickk@tailscale.com>
In this PR, we update setExitNodeID to retain the existing exit node if auto exit node is enabled,
the current exit node is allowed by policy, and no suggested exit node is available yet.
Updates tailscale/corp#29969
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Now that (*LocalBackend).suggestExitNodeLocked is never called with a non-current netmap
(the netMap parameter is always nil, indicating that the current netmap should be used),
we can remove the unused parameter.
Additionally, instead of suggestExitNodeLocked passing the most recent full netmap to suggestExitNode,
we now pass the current nodeBackend so it can access peers with delta updates applied.
Finally, with that fixed, we no longer need to skip TestUpdateNetmapDeltaAutoExitNode.
Updates tailscale/corp#29969
Fixes#16455
Signed-off-by: Nick Khyl <nickk@tailscale.com>
With this change, policy enforcement and exit node resolution can happen in separate steps,
since enforcement no longer depends on resolving the suggested exit node. This keeps policy
enforcement synchronous (e.g., when switching profiles), while allowing exit node resolution
to be asynchronous on netmap updates, link changes, etc.
Additionally, the new preference will be used to let GUIs and CLIs switch back to "auto" mode
after a manual exit node override, which is necessary for tailscale/corp#29969.
Updates tailscale/corp#29969
Updates #16459
Signed-off-by: Nick Khyl <nickk@tailscale.com>
TestSetControlClientStatusAutoExitNode is broken similarly to TestUpdateNetmapDeltaAutoExitNode
as suggestExitNode didn't previously check the online status of exit nodes, and similarly to the other test
it succeeded because the test itself is also broken.
However, it is easier to fix as it sends out a full netmap update rather than a delta peer update,
so it doesn't depend on the same refactoring as TestSetControlClientStatusAutoExitNode.
Updates #16455
Updates tailscale/corp#29969
Signed-off-by: Nick Khyl <nickk@tailscale.com>
suggestExitNode never checks whether an exit node candidate is online.
It also accepts a full netmap, which doesn't include changes from delta updates.
The test can't work correctly until both issues are fixed.
Previously, it passed only because the test itself is flawed.
It doesn't succeed because the currently selected node goes offline and a new one is chosen.
Instead, it succeeds because lastSuggestedExitNode is incorrect, and suggestExitNode picks
the correct node the first time it runs, based on the DERP map and the netcheck report.
The node in exitNodeIDWant just happens to be the optimal choice.
Fixing SuggestExitNode requires refactoring its callers first, which in turn reveals the flawed test,
as suggestExitNode ends up being called slightly earlier.
In this PR, we update the test to correctly fail due to existing bugs in SuggestExitNode,
and temporarily skip it until those issues are addressed in a future commit.
Updates #16455
Updates tailscale/corp#29969
Signed-off-by: Nick Khyl <nickk@tailscale.com>
We would like to start sending whether a node is a Tailnet owner in netmap responses so that clients can determine what information to display to a user who wants to request account deletion.
Updates tailscale/corp#30016
Signed-off-by: kari-ts <kari@tailscale.com>
This commit fixes the bug that c2n requests are skiped when updating vipServices in serveConfig. This then resulted
netmap update being skipped which caused inaccuracy of Capmap info on client side. After this fix, client always
inform control about it's vipServices config changes.
Fixestailscale/corp#29219
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
This is an integration test that covers all the code in Direct, Auto, and
LocalBackend that processes NetMaps and creates a Filter. The test uses
tsnet as a convenient proxy for setting up all the client pieces correctly,
but is not actually a test specific to tsnet.
Updates tailscale/corp#20514
Signed-off-by: James Sanderson <jsanderson@tailscale.com>
This adds a feature/taildrop package, a ts_omit_taildrop build tag,
and starts moving code to feature/taildrop. In some cases, code
remains where it was but is now behind a build tag. Future changes
will move code to an extension and out of LocalBackend, etc.
Updates #12614
Change-Id: Idf96c61144d1a5f707039ceb2ff59c99f5c1642f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Although, at the moment, we do not yet require an event bus to be present, as
we start to add more pieces we will want to ensure it is always available. Add
a new constructor and replace existing uses of new(tsd.System) throughout.
Update generated files for import changes.
Updates #15160
Change-Id: Ie5460985571ade87b8eac8b416948c7f49f0f64b
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
https://github.com/tailscale/tailscale/pull/15395 changed the logic to
skip `EditPrefs` when the platform doesn't support auto-updates. But the
old logic would only fail `EditPrefs` if the auto-update value was
`true`. If it was `false`, `EditPrefs` would succeed and store `false`
in prefs. The new logic will keep the value `unset` even if the tailnet
default is `false`.
Fixes#15691
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Ultimately, we'd like to get rid of the concept of the "current user". It is only used on Windows,
but even then it doesn't work well in multi-user and enterprise/managed Windows environments.
In this PR, we update LocalBackend and profileManager to decouple them a bit more from this obsolete concept.
This is done in a preparation for extracting ipnlocal.Extension-related interfaces and types, and using them
to implement optional features like tailscale/corp#27645, instead of continuing growing the core ipnlocal logic.
Notably, we rename (*profileManager).SetCurrentUserAndProfile() to SwitchToProfile() and change its signature
to accept an ipn.LoginProfileView instead of an ipn.ProfileID and ipn.WindowsUserID. Since we're not removing
the "current user" completely just yet, the method sets the current user to the owner of the target profile.
We also update the profileResolver callback type, which is typically implemented by LocalBackend extensions,
to return an ipn.LoginProfileView instead of ipn.ProfileID and ipn.WindowsUserID.
Updates tailscale/corp#27645
Updates tailscale/corp#18342
Signed-off-by: Nick Khyl <nickk@tailscale.com>
LocalBackend transitions to ipn.NoState when switching to a different (or new) profile.
When this happens, we should unconfigure wgengine to clear routes, DNS configuration,
firewall rules that block all traffic except to the exit node, etc.
In this PR, we update (*LocalBackend).enterStateLockedOnEntry to do just that.
Fixes#15316
Updates tailscale/corp#23967
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Resetting LocalBackend's netmap without also unconfiguring wgengine to reset routes, DNS, and the killswitch
firewall rules may cause connectivity issues until a new netmap is received.
In some cases, such as when bootstrap DNS servers are inaccessible due to network restrictions or other reasons,
or if the control plane is experiencing issues, this can result in a complete loss of connectivity until the user disconnects
and reconnects to Tailscale.
As LocalBackend handles state resets in (*LocalBackend).resetForProfileChangeLockedOnEntry(), and this includes
resetting the netmap, resetting the current netmap in (*LocalBackend).Start() is not necessary.
Moreover, it's harmful if (*LocalBackend).Start() is called more than once for the same profile.
In this PR, we update resetForProfileChangeLockedOnEntry() to reset the packet filter and remove
the redundant resetting of the netmap and packet filter from Start(). We also update the state machine
tests and revise comments that became inaccurate due to previous test updates.
Updates tailscale/corp#27173
Signed-off-by: Nick Khyl <nickk@tailscale.com>
If conffile is used to configure tailscaled, always update
currently advertised services from conffile, even if they
are empty in the conffile, to ensure that it is possible
to transition to a state where no services are advertised.
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Hostinfo.WireIngress is used as a hint that the node intends to use
funnel. We now send another field, IngressEnabled, in cases where
funnel is explicitly enabled, and the logic control-side has
been changed to look at IngressEnabled as well as WireIngress in all
cases where previously the hint was used - so we can now stop sending
WireIngress when IngressEnabled is true to save some bandwidth.
Updates tailscale/tailscale#11572
Updates tailscale/corp#25931
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
In this PR, we update client/tailscale.LocalClient to allow sending requests with an optional X-Tailscale-Reason
header. We then update ipn/ipnserver.{actor,Server} to retrieve this reason, if specified, and use it to determine
whether ipnauth.Disconnect is allowed when the AlwaysOn.OverrideWithReason policy setting is enabled.
For now, we log the reason, along with the profile and OS username, to the backend log.
Finally, we update LocalBackend to remember when a disconnect was permitted and do not reconnect automatically
unless the policy changes.
Updates tailscale/corp#26146
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Conventionally, we use views (e.g., ipn.PrefsView, tailcfg.NodeView, etc.) when
dealing with structs that shouldn't be mutated. However, ipn.LoginProfile has been
an exception so far, with a mix of passing and returning LoginProfile by reference
(allowing accidental mutations) and by value (which is wasteful, given its
current size of 192 bytes).
In this PR, we generate an ipn.LoginProfileView and use it instead of passing/returning
LoginProfiles by mutable reference or copying them when passing/returning by value.
Now, LoginProfiles can only be mutated by (*profileManager).setProfilePrefs.
Updates #14823
Signed-off-by: Nick Khyl <nickk@tailscale.com>
If we fail to parse the upstream DNS response in an app connector, we
might miss new IPs for the target domain. Log parsing errors to be able
to diagnose that.
Updates #14606
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
* Reapply "ipn/ipnlocal: re-advertise appc routes on startup (#14609)"
This reverts commit 51adaec35a.
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
* ipn/ipnlocal: fix a deadlock in readvertiseAppConnectorRoutes
Don't hold LocalBackend.mu while calling the methods of
appc.AppConnector. Those methods could call back into LocalBackend and
try to acquire it's mutex.
Fixes https://github.com/tailscale/corp/issues/25965Fixes#14606
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
---------
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Rather than using a string everywhere and needing to clarify that the
string should have the svc: prefix, create a separate type for Service
names.
Updates tailscale/corp#24607
Change-Id: I720e022f61a7221644bb60955b72cacf42f59960
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
This commit intend to provide support for TCP and Web VIP services and also allow user to use Tun
for VIP services if they want to.
The commit includes:
1.Setting TCP intercept function for VIP Services.
2.Update netstack to send packet written from WG to netStack handler for VIP service.
3.Return correct TCP hander for VIP services when netstack acceptTCP.
This commit also includes unit tests for if the local backend setServeConfig would set correct TCP intercept
function and test if a hander gets returned when getting TCPHandlerForDst. The shouldProcessInbound
check is not unit tested since the test result just depends on mocked functions. There should be an integration
test to cover shouldProcessInbound and if the returned TCP handler actually does what the serveConfig says.
Updates tailscale/corp#24604
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
Adds a new Hostinfo.IngressEnabled bool field that holds whether
funnel is currently enabled for the node. Triggers control update
when this value changes.
Bumps capver so that control can distinguish the new field being false
vs non-existant in previous clients.
This is part of a fix for an issue where nodes with any AllowFunnel
block set in their serve config are being displayed as if actively
routing funnel traffic in the admin panel.
Updates tailscale/tailscale#11572
Updates tailscale/corp#25931
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
There's at least one example of stored routes and advertised routes
getting out of sync. I don't know how they got there yet, but this would
backfill missing advertised routes on startup from stored routes.
Also add logging in LocalBackend.AdvertiseRoute to record when new
routes actually get put into prefs.
Updates #14606
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This deprecates the old "DERP string" packing a DERP region ID into an
IP:port of 127.3.3.40:$REGION_ID and just uses an integer, like
PeerChange.DERPRegion does.
We still support servers sending the old form; they're converted to
the new form internally right when they're read off the network.
Updates #14636
Change-Id: I9427ec071f02a2c6d75ccb0fcbf0ecff9f19f26f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This commit updates the VIPService c2n endpoint on client to response with actual VIPService configuration stored
in the serve config.
Fixestailscale/corp#24510
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
In the process, because I needed it for testing, make all
LocalBackend-managed goroutines be accounted for. And then in tests,
verify they're no longer running during LocalBackend.Shutdown.
Updates tailscale/corp#19681
Change-Id: Iad873d4df7d30103a4a7863dfacf9e078c77e6a3
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In this PR, we update ipnlocal.NewLocalBackend to subscribe to policy change notifications
and reapply syspolicy settings to the current profile's ipn.Prefs whenever a change occurs.
Updates #12687
Signed-off-by: Nick Khyl <nickk@tailscale.com>
This moves code that handles ExitNodeID/ExitNodeIP syspolicy settings
from (*LocalBackend).setExitNodeID to applySysPolicy.
Updates #12687
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Nick Khyl
kari-ts
JerryYan
Jordan Whited
James Sanderson
KevinLiang10
Brad Fitzpatrick
David Anderson
M. J. Fromberger
Andrew Lytvynov
Irbe Krumina
Adrian Dewhurst