Normalize 0.0.0.0 and :: to wildcard in resolveListenAddr so listeners
match incoming connections.
Fix ephemeral port allocation across all three modes: extract assigned
ports from gVisor listeners (TUN TCP and UDP), and add an ephemeral port
allocator for netstack TCP.
Updates #6815
Updates #12182Fixes#14042
Signed-off-by: James Tucker <jftucker@gmail.com>
Server.Close held s.mu for the entire shutdown duration, including
netstack.Close (which waits for gVisor goroutines to exit) and
lb.Shutdown. gVisor callbacks like getTCPHandlerForFlow acquire s.mu via
listenerForDstAddr, so any in-flight gVisor goroutine attempting that
callback during stack shutdown would deadlock with Close.
Replace the mu-guarded closed bool with a sync.Once, and release s.mu
after closing listeners but before the heavy shutdown operations. Also
cancel shutdownCtx before netstack.Close so pending handlers observe
cancellation rather than contending on the lock.
Updates #18423
Signed-off-by: James Tucker <james@tailscale.com>
TestDial in particular sometimes gets stuck in CI for minutes, letting
chantun drop packets during shutdown avoids blocking shutdown.
Updates #18423
Signed-off-by: James Tucker <jftucker@gmail.com>
When a tsnet.Server dials its own Tailscale IP, TCP SYN packets are
silently dropped. In inject(), outbound packets with dst=self fail the
shouldSendToHost check and fall through to WireGuard, which has no peer
for the node's own address.
Fix this by detecting self-addressed packets in inject() using isLocalIP
and delivering them back into gVisor's network stack as inbound packets
via a new DeliverLoopback method on linkEndpoint. The outbound packet
must be re-serialized into a new PacketBuffer because outbound packets
have their headers parsed into separate views, but DeliverNetworkPacket
expects raw unparsed data.
Updates #18829
Signed-off-by: James Tucker <james@tailscale.com>
This commit is based on ff0978ab, and extends #18497 to connect network map
caching to the LocalBackend. As implemented, only "whole" netmap values are
stored, and we do not yet handle incremental updates. As-written, the feature must
be explicitly enabled via the TS_USE_CACHED_NETMAP envknob, and must be
considered experimental.
Updates #12639
Co-Authored-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I48a1e92facfbf7fb3a8e67cff7f2c9ab4ed62c83
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
Two methods were recently added to the testcontrol.Server type:
AddDNSRecords and SetGlobalAppCaps. These two methods should trigger
netmap updates for all nodes connected to the Server instance, the way
that other state-change methods do (see SetNodeCapMap, for example).
This will also allow us to get rid of Server.ForceNetmapUpdate, which
was a band-aid fix to force the netmap updates which should have been
triggered by the aforementioned methods.
Fixestailscale/corp#37102
Signed-off-by: Harry Harpham <harry@tailscale.com>
bart has gained a bunch of purported performance and usability
improvements since the current version we are using (0.18.0,
from 1y ago)
Updates tailscale/corp#36982
Signed-off-by: Amal Bansode <amal@tailscale.com>
This resolves a gap in test coverage, ensuring Server.ListenService
functions as expected in combination with user-supplied TUN devices
Fixestailscale/corp#36603
Co-authored-by: Harry Harpham <harry@tailscale.com>
Signed-off-by: Harry Harpham <harry@tailscale.com>
This file was never truly necessary and has never actually been used in
the history of Tailscale's open source releases.
A Brief History of AUTHORS files
---
The AUTHORS file was a pattern developed at Google, originally for
Chromium, then adopted by Go and a bunch of other projects. The problem
was that Chromium originally had a copyright line only recognizing
Google as the copyright holder. Because Google (and most open source
projects) do not require copyright assignemnt for contributions, each
contributor maintains their copyright. Some large corporate contributors
then tried to add their own name to the copyright line in the LICENSE
file or in file headers. This quickly becomes unwieldy, and puts a
tremendous burden on anyone building on top of Chromium, since the
license requires that they keep all copyright lines intact.
The compromise was to create an AUTHORS file that would list all of the
copyright holders. The LICENSE file and source file headers would then
include that list by reference, listing the copyright holder as "The
Chromium Authors".
This also become cumbersome to simply keep the file up to date with a
high rate of new contributors. Plus it's not always obvious who the
copyright holder is. Sometimes it is the individual making the
contribution, but many times it may be their employer. There is no way
for the proejct maintainer to know.
Eventually, Google changed their policy to no longer recommend trying to
keep the AUTHORS file up to date proactively, and instead to only add to
it when requested: https://opensource.google/docs/releasing/authors.
They are also clear that:
> Adding contributors to the AUTHORS file is entirely within the
> project's discretion and has no implications for copyright ownership.
It was primarily added to appease a small number of large contributors
that insisted that they be recognized as copyright holders (which was
entirely their right to do). But it's not truly necessary, and not even
the most accurate way of identifying contributors and/or copyright
holders.
In practice, we've never added anyone to our AUTHORS file. It only lists
Tailscale, so it's not really serving any purpose. It also causes
confusion because Tailscalars put the "Tailscale Inc & AUTHORS" header
in other open source repos which don't actually have an AUTHORS file, so
it's ambiguous what that means.
Instead, we just acknowledge that the contributors to Tailscale (whoever
they are) are copyright holders for their individual contributions. We
also have the benefit of using the DCO (developercertificate.org) which
provides some additional certification of their right to make the
contribution.
The source file changes were purely mechanical with:
git ls-files | xargs sed -i -e 's/\(Tailscale Inc &\) AUTHORS/\1 contributors/g'
Updates #cleanup
Change-Id: Ia101a4a3005adb9118051b3416f5a64a4a45987d
Signed-off-by: Will Norris <will@tailscale.com>
tsnet users can now provide a tun.Device, including any custom
implementation that conforms to the interface.
netstack has a new option CheckLocalTransportEndpoints that when used
alongside a TUN enables netstack listens and dials to correctly capture
traffic associated with those sockets. tsnet with a TUN sets this
option, while all other builds leave this at false to preserve existing
performance.
Updates #18423
Signed-off-by: James Tucker <james@tailscale.com>
Every other listen method on tsnet.Server makes this clarification, so
should ListenService.
Fixestailscale/corp#36207
Signed-off-by: Harry Harpham <harry@tailscale.com>
This change allows tsnet nodes to act as Service hosts by adding a new
function, tsnet.Server.ListenService. Invoking this function will
advertise the node as a host for the Service and create a listener to
receive traffic for the Service.
Fixes#17697Fixestailscale/corp#27200
Signed-off-by: Harry Harpham <harry@tailscale.com>
Allow for optionally specifiying an audience for tsnet. This is passed
to the underlying identity federation logic to allow for tsnet auth to
use automatic ID token generation for authentication.
Updates https://github.com/tailscale/corp/issues/33316
Signed-off-by: Mario Minardi <mario@tailscale.com>
Adds the ability to detect what provider the client is running on and tries fetch the ID token to use with Workload Identity.
Updates https://github.com/tailscale/corp/issues/33316
Signed-off-by: Danni Popova <danni@tailscale.com>
Previously the funnel listener would leave artifacts in the serve
config. This caused weird out-of-sync effects like the admin panel
showing that funnel was enabled for a node, but the node rejecting
packets because the listener was closed.
This change resolves these synchronization issues by ensuring that
funnel listeners clean up the serve config when closed.
See also:
e109cf9fdd
Updates #cleanup
Signed-off-by: Harry Harpham <harry@tailscale.com>
Prior to this change, we were resetting the tsnet's serve config every
time tsnet.Server.Up was run. This is important to do on startup, to
prevent messy interactions with stale configuration when the code has
changed.
However, Up is frequently run as a just-in-case step (for example, by
Server.ListenTLS/ListenFunnel and possibly by consumers of tsnet). When
the serve config is reset on each of these calls to Up, this creates
situations in which the serve config disappears unexpectedly. The
solution is to reset the serve config only on the first call to Up.
Fixes#8800
Updates tailscale/corp#27200
Signed-off-by: Harry Harpham <harry@tailscale.com>
Moves magicksock.cloudInfo into util/cloudinfo with minimal changes.
Updates #17796
Change-Id: I83f32473b9180074d5cdbf00fa31e5b3f579f189
Signed-off-by: Alex Valiushko <alexvaliushko@tailscale.com>
Adds cmd/cigocacher as the client to cigocached for Go caching over
HTTP. The HTTP cache is best-effort only, and builds will fall back to
disk-only cache if it's not available, much like regular builds.
Not yet used in CI; that will follow in another PR once we have runners
available in this repo with the right network setup for reaching
cigocached.
Updates tailscale/corp#10808
Change-Id: I13ae1a12450eb2a05bd9843f358474243989e967
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Pick up a fix for https://pkg.go.dev/vuln/GO-2025-4116 (even though
we're not affected).
Updates #cleanup
Change-Id: I9f2571b17c1f14db58ece8a5a34785805217d9dd
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This adds the --proxy-protocol flag to 'tailscale serve' and
'tailscale funnel', which tells the Tailscale client to prepend a PROXY
protocol[1] header when making connections to the proxied-to backend.
I've verified that this works with our existing funnel servers without
additional work, since they pass along source address information via
PeerAPI already.
Updates #7747
[1]: https://www.haproxy.org/download/1.8/doc/proxy-protocol.txt
Change-Id: I647c24d319375c1b33e995555a541b7615d2d203
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
It's an unnecessary nuisance having it. We go out of our way to redact
it in so many places when we don't even need it there anyway.
Updates #12639
Change-Id: I5fc72e19e9cf36caeb42cf80ba430873f67167c3
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
So they're not all run N times on the sharded oss builders
and are only run one time each.
Updates tailscale/corp#28679
Change-Id: Ie21e84b06731fdc8ec3212eceb136c8fc26b0115
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Include the node's OS with network flow log information.
Refactor the JSON-length computation to be a bit more precise.
Updates tailscale/corp#33352Fixestailscale/corp#34030
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
In #17639 we moved the subscription into NewLogger to ensure we would not race
subscribing with shutdown of the eventbus client. Doing so fixed that problem,
but exposed another: As we were only servicing events occasionally when waiting
for the network to come up, we could leave the eventbus to stall in cases where
a number of network deltas arrived later and weren't processed.
To address that, let's separate the concerns: As before, we'll Subscribe early
to avoid conflicts with shutdown; but instead of using the subscriber directly
to determine readiness, we'll keep track of the last-known network state in a
selectable condition that the subscriber updates for us. When we want to wait,
we'll wait on that condition (or until our context ends), ensuring all the
events get processed in a timely manner.
Updates #17638
Updates #15160
Change-Id: I28339a372be4ab24be46e2834a218874c33a0d2d
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
Merge the connstats package into the netlog package
and unexport all of its declarations.
Remove the buildfeatures.HasConnStats and use HasNetLog instead.
Updates tailscale/corp#33352
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
The connstats package was an unnecessary layer of indirection.
It was seperated out of wgengine/netlog so that net/tstun and
wgengine/magicsock wouldn't need a depenedency on the concrete
implementation of network flow logging.
Instead, we simply register a callback for counting connections.
This PR does the bare minimum work to prepare tstun and magicsock
to only care about that callback.
A future PR will delete connstats and merge it into netlog.
Updates tailscale/corp#33352
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Part of making all netlink monitoring code optional.
Updates #17311 (how I got started down this path)
Updates #12614
Change-Id: Ic80d8a7a44dc261c4b8678b3c2241c3b3778370d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Saves 45 KB from the min build, no longer pulling in deephash or
util/hashx, both with unsafe code.
It can actually be more efficient to not use deephash, as you don't
have to walk all bytes of all fields recursively to answer that two
things are not equal. Instead, you can just return false at the first
difference you see. And then with views (as we use ~everywhere
nowadays), the cloning the old value isn't expensive, as it's just a
pointer under the hood.
Updates #12614
Change-Id: I7b08616b8a09b3ade454bb5e0ac5672086fe8aec
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Saves ~53 KB from the min build.
Updates #12614
Change-Id: I73f9544a9feea06027c6ebdd222d712ada851299
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Saves ~102 KB from the min build.
Updates #12614
Change-Id: Ie1d4f439321267b9f98046593cb289ee3c4d6249
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
c2n was already a conditional feature, but it didn't have a
feature/c2n directory before (rather, it was using consts + DCE). This
adds it, and moves some code, which removes the httprec dependency.
Also, remove some unnecessary code from our httprec fork.
Updates #12614
Change-Id: I2fbe538e09794c517038e35a694a363312c426a2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Saves 86 KB.
And stop depending on expvar and usermetrics when disabled,
in prep to removing all the expvar/metrics/tsweb stuff.
Updates #12614
Change-Id: I35d2479ddd1d39b615bab32b1fa940ae8cbf9b11
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Add and wire up event publishers for these two event types in the AppConnector.
Nothing currently subscribes to them, so this is harmless. Subscribers for
these events will be added in a near-future commit.
As part of this, move the appc.RouteInfo type to the types/appctype package.
It does not contain any package-specific details from appc. Beside it, add
appctype.RouteUpdate to carry route update event state, likewise not specific
to appc. Update all usage of the appc.* types throughout to use appctype.*
instead, and update depaware files to reflect these changes.
Add a Close method to the AppConnector to make sure the client gets cleaned up
when the connector is dropped (we re-create connectors).
Update the unit tests in the appc package to also check the events published
alongside calls to the RouteAdvertiser.
For now the tests still rely on the RouteAdvertiser for correctness; this is OK
for now as the two methods are always performed together. In the near future,
we need to rework the tests so not require that, but that will require building
some more test fixtures that we can handle separately.
Updates #15160
Updates #17192
Change-Id: I184670ba2fb920e0d2cb2be7c6816259bca77afe
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
Saves 352 KB, removing one of our two HTTP/2 implementations linked
into the binary.
Fixes#17305
Updates #15015
Change-Id: I53a04b1f2687dca73c8541949465038b69aa6ade
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
A following change will split out the controlclient.NoiseClient type
out, away from the rest of the controlclient package which is
relatively dependency heavy.
A question was where to move it, and whether to make a new (a fifth!)
package in the ts2021 dependency chain.
@creachadair and I brainstormed and decided to merge
internal/noiseconn and controlclient.NoiseClient into one package,
with names ts2021.Conn and ts2021.Client.
For ease of reviewing the subsequent PR, this is the first step that
just renames the internal/noiseconn package to control/ts2021.
Updates #17305
Change-Id: Ib5ea162dc1d336c1d805bdd9548d1702dd6e1468
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
depaware was merging golang.org/x/foo and std's
vendor/golang.org/x/foo packages (which could both be in the binary!),
leading to confusing output, especially when I was working on
eliminating duplicate packages imported under different names.
This makes the depaware output longer and grosser, but doesn't hide
reality from us.
Updates #17305
Change-Id: I21cc3418014e127f6c1a81caf4e84213ce84ab57
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The callback itself is not removed as it is used in other repos, making
it simpler for those to slowly transition to the eventbus.
Updates #15160
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
James Tucker
James Tucker
Brad Fitzpatrick
M. J. Fromberger
Harry Harpham
Amal Bansode
Will Norris
Mario Minardi
Danni Popova
Andrew Dunham
Alex Valiushko
Gesa Stupperich
Tom Proctor
Alex Chan
Andrew Lytvynov
Andrew Dunham
Joe Tsai
Claus Lensbøl