Saves ~94 KB from the min build.
Updates #12614
Change-Id: I3b0b8a47f80b9fd3b1038c2834b60afa55bf02c2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Saves ~102 KB from the min build.
Updates #12614
Change-Id: Ie1d4f439321267b9f98046593cb289ee3c4d6249
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Saves 262 KB so far. I'm sure I missed some places, but shotizam says
these were the low hanging fruit.
Updates #12614
Change-Id: Ia31c01b454f627e6d0470229aae4e19d615e45e3
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Add and wire up event publishers for these two event types in the AppConnector.
Nothing currently subscribes to them, so this is harmless. Subscribers for
these events will be added in a near-future commit.
As part of this, move the appc.RouteInfo type to the types/appctype package.
It does not contain any package-specific details from appc. Beside it, add
appctype.RouteUpdate to carry route update event state, likewise not specific
to appc. Update all usage of the appc.* types throughout to use appctype.*
instead, and update depaware files to reflect these changes.
Add a Close method to the AppConnector to make sure the client gets cleaned up
when the connector is dropped (we re-create connectors).
Update the unit tests in the appc package to also check the events published
alongside calls to the RouteAdvertiser.
For now the tests still rely on the RouteAdvertiser for correctness; this is OK
for now as the two methods are always performed together. In the near future,
we need to rework the tests so not require that, but that will require building
some more test fixtures that we can handle separately.
Updates #15160
Updates #17192
Change-Id: I184670ba2fb920e0d2cb2be7c6816259bca77afe
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
Saves 442 KB. Lock it with a new min test.
Updates #12614
Change-Id: Ia7bf6f797b6cbf08ea65419ade2f359d390f8e91
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Saves 328 KB (2.5%) off the minimal binary.
For IoT devices that don't need MagicDNS (e.g. they don't make
outbound connections), this provides a knob to disable all the DNS
functionality.
Rather than a massive refactor today, this uses constant false values
as a deadcode sledgehammer, guided by shotizam to find the largest DNS
functions which survived deadcode.
A future refactor could make it so that the net/dns/resolver and
publicdns packages don't even show up in the import graph (along with
their imports) but really it's already pretty good looking with just
these consts, so it's not at the top of my list to refactor it more
soon.
Also do the same in a few places with the ACME (cert) functionality,
as I saw those while searching for DNS stuff.
Updates #12614
Change-Id: I8e459f595c2fde68ca16503ff61c8ab339871f97
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Allow the user to access information about routes an app connector has
learned, such as how many routes for each domain.
Fixestailscale/corp#32624
Signed-off-by: Fran Bull <fran@tailscale.com>
Removes 434 KB from the minimal Linux binary, or ~3%.
Primarily this comes from not linking in the zstd encoding code.
Fixes#17323
Change-Id: I0a90de307dfa1ad7422db7aa8b1b46c782bfaaf7
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The dnstype package is used by tailcfg, which tries to be light and
leafy. But it brings in dnstype. So dnstype shouldn't bring in
x/net/dns/dnsmessage.
Updates #12614
Change-Id: I043637a7ce7fed097e648001f13ca1927a781def
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
A customer wants to allow their employees to restart tailscaled at will, when access rights and MDM policy allow it,
as a way to fully reset client state and re-create the tunnel in case of connectivity issues.
On Windows, the main tailscaled process runs as a child of a service process. The service restarts the child
when it exits (or crashes) until the service itself is stopped. Regular (non-admin) users can't stop the service,
and allowing them to do so isn't ideal, especially in managed or multi-user environments.
In this PR, we add a LocalAPI endpoint that instructs ipnserver.Server, and by extension the tailscaled process,
to shut down. The service then restarts the child tailscaled. Shutting down tailscaled requires LocalAPI write access
and an enabled policy setting.
Updates tailscale/corp#32674
Updates tailscale/corp#32675
Signed-off-by: Nick Khyl <nickk@tailscale.com>
I'd started to do this in the earlier ts_omit_server PR but
decided to split it into this separate PR.
Updates #17128
Change-Id: Ief8823a78d1f7bbb79e64a5cab30a7d0a5d6ff4b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The Tracker was using direct callbacks to ipnlocal. This PR moves those
to be triggered via the eventbus.
Additionally, the eventbus is now closed on exit from tailscaled
explicitly, and health is now a SubSystem in tsd.
Updates #15160
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
This is a small introduction of the eventbus into controlclient that
communicates with mainly ipnlocal. While ipnlocal is a complicated part
of the codebase, the subscribers here are from the perspective of
ipnlocal already called async.
Updates #15160
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
As of this commit (per the issue), the Taildrive code remains where it
was, but in new files that are protected by the new ts_omit_drive
build tag. Future commits will move it.
Updates #17058
Change-Id: Idf0a51db59e41ae8da6ea2b11d238aefc48b219e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Some of the operations of the local API need an event bus to correctly
instantiate other components (notably including the portmapper).
This commit adds that, and as the parameter list is starting to get a bit long
and hard to read, I took the opportunity to move the arguments to a config
type. Only a few call sites needed to be updated and this API is not intended
for general use, so I did not bother to stage the change.
Updates #15160
Updates #16842
Change-Id: I7b057d71161bd859f5acb96e2f878a34c85be0ef
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
Make it possible to dump the eventbus graph as JSON or DOT to both debug
and document what is communicated via the bus.
Updates #15160
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
Errors were mashalled without the correct newlines. Also, they could
generally be mashalled with more data, so an intermediate was introduced
to make them slightly nicer to look at.
Updates #15160
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
In this PR, we start passing a LocalAPI actor to (*LocalBackend).Logout to make it subject
to the same access check as disconnects made via tailscale down or the GUI.
We then update the CLI to allow `tailscale logout` to accept a reason, similar to `tailscale down`.
Updates tailscale/corp#26249
Signed-off-by: Nick Khyl <nickk@tailscale.com>
We extract checkEditPrefsAccessLocked, adjustEditPrefsLocked, and onEditPrefsLocked from the EditPrefs
execution path, defining when each step is performed and what behavior is allowed at each stage.
Currently, this is primarily used to support Always On mode, to handle the Exit Node enablement toggle,
and to report prefs edit metrics.
We then use it to enforce Exit Node policy settings by preventing users from setting an exit node
and making EditPrefs return an error when an exit node is restricted by policy. This enforcement is also
extended to the Exit Node toggle.
These changes prepare for supporting Exit Node overrides when permitted by policy and preventing logout
while Always On mode is enabled.
In the future, implementation of these methods can be delegated to ipnext extensions via the feature hooks.
Updates tailscale/corp#29969
Updates tailscale/corp#26249
Signed-off-by: Nick Khyl <nickk@tailscale.com>
We already present a health warning about this, but it is easy to miss
on a server when blackholing traffic makes it unreachable.
In addition to a health warning, present a risk message when exit node
is enabled.
Example:
```
$ tailscale up --exit-node=lizard
The following issues on your machine will likely make usage of exit nodes impossible:
- interface "ens4" has strict reverse-path filtering enabled
- interface "tailscale0" has strict reverse-path filtering enabled
Please set rp_filter=2 instead of rp_filter=1; see https://github.com/tailscale/tailscale/issues/3310
To skip this warning, use --accept-risk=linux-strict-rp-filter
$
```
Updates #3310
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
This adds a feature/taildrop package, a ts_omit_taildrop build tag,
and starts moving code to feature/taildrop. In some cases, code
remains where it was but is now behind a build tag. Future changes
will move code to an extension and out of LocalBackend, etc.
Updates #12614
Change-Id: Idf96c61144d1a5f707039ceb2ff59c99f5c1642f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In preparation for adding more parameters (and later, moving some away), rework
the portmapper constructor to accept its arguments on a Config struct rather
than positionally.
This is a breaking change to the function signature, but one that is very easy
to update, and a search of GitHub reveals only six instances of usage outside
clones and forks of Tailscale itself, that are not direct copies of the code
fixed up here.
While we could stub in another constructor, I think it is safe to let those
folks do the update in-place, since their usage is already affected by other
changes we can't test for anyway.
Updates #15160
Change-Id: I9f8a5e12b38885074c98894b7376039261b43f43
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
Although, at the moment, we do not yet require an event bus to be present, as
we start to add more pieces we will want to ensure it is always available. Add
a new constructor and replace existing uses of new(tsd.System) throughout.
Update generated files for import changes.
Updates #15160
Change-Id: Ie5460985571ade87b8eac8b416948c7f49f0f64b
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
With #14843 merged, (*localapi.Handler).servePrefs() now requires a non-nil actor,
and other places may soon require it as well.
In this PR, we update localapi.NewHandler with a new required parameter for the actor.
We then update tsnet to use ipnauth.Self.
We also rearrange the code in (*ipnserver.Server).serveHTTP() to pass the actor via Handler's
constructor instead of the field.
Updates #14823
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Observed on some airlines (British Airways, WestJet), Squid is
configured to cache and transform these results, which is disruptive.
The server and client should both actively request that this is not done
by setting Cache-Control headers.
Send a timestamp parameter to further work against caches that do not
respect the cache-control headers.
Updates #14856
Signed-off-by: James Tucker <james@tailscale.com>
In this PR, we update LocalBackend to set WantRunning=true when applying policy settings
to the current profile's prefs, if the "always-on" mode is enabled.
We also implement a new (*LocalBackend).EditPrefsAs() method, which is like EditPrefs
but accepts an actor (e.g., a LocalAPI client's identity) that initiated the change.
If WantRunning is being set to false, the new EditPrefsAs method checks whether the actor
has ipnauth.Disconnect access to the profile and propagates an error if they do not.
Finally, we update (*ipnserver.actor).CheckProfileAccess to allow a disconnect
only if the "always-on" mode is not enabled by the AlwaysOn policy setting.
This is not a comprehensive solution to the "always-on" mode across platforms,
as instead of disconnecting a user could achieve the same effect by creating
a new empty profile, initiating a reauth, or by deleting the profile.
These are the things we should address in future PRs.
Updates #14823
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Conventionally, we use views (e.g., ipn.PrefsView, tailcfg.NodeView, etc.) when
dealing with structs that shouldn't be mutated. However, ipn.LoginProfile has been
an exception so far, with a mix of passing and returning LoginProfile by reference
(allowing accidental mutations) and by value (which is wasteful, given its
current size of 192 bytes).
In this PR, we generate an ipn.LoginProfileView and use it instead of passing/returning
LoginProfiles by mutable reference or copying them when passing/returning by value.
Now, LoginProfiles can only be mutated by (*profileManager).setProfilePrefs.
Updates #14823
Signed-off-by: Nick Khyl <nickk@tailscale.com>
We had the debug packet capture code + Lua dissector in the CLI + the
iOS app. Now we don't, with tests to lock it in.
As a bonus, tailscale.com/net/packet and tailscale.com/net/flowtrack
no longer appear in the CLI's binary either.
A new build tag ts_omit_capture disables the packet capture code and
was added to build_dist.sh's --extra-small mode.
Updates #12614
Change-Id: I79b0628c0d59911bd4d510c732284d97b0160f10
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
sync.OnceValue and slices.Compact were both added in Go 1.21.
cmp.Or was added in Go 1.22.
Updates #8632
Updates #11058
Change-Id: I89ba4c404f40188e1f8a9566c8aaa049be377754
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Brad Fitzpatrick
M. J. Fromberger
Fran Bull
Nick Khyl
Claus Lensbøl
Jordan Whited
Anton Tolchanov
Jonathan Nobels
David Anderson
James Tucker
Nahum Shalman