This adds support for container-like types such as Container[T] that
don't explicitly specify a view type for T. Instead, a package implementing
a container type should also implement and export a ContainerView[T, V] type
and a ContainerViewOf(*Container[T]) ContainerView[T, V] function, which
returns a view for the specified container, inferring the element view type V
from the element type T.
Updates #12736
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Some users run "tailscale cert" in a cron job to renew their
certificates on disk. The time until the next cron job run may be long
enough for the old cert to expire with our default heristics.
Add a `--min-validity` flag which ensures that the returned cert is
valid for at least the provided duration (unless it's longer than the
cert lifetime set by Let's Encrypt).
Updates #8725
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Remove fybrik.io/crdoc dependency as it is causing issues for folks attempting
to vendor tailscale using GOPROXY=direct.
This means that the CRD API docs in ./k8s-operator/api.md will no longer
be generated- I am going to look at replacing it with another tool
in a follow-up.
Updates tailscale/tailscale#12859
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
To match the format of exit node suggestions and ensure that the result
is not ambiguous, relax exit node CLI selection to permit using a FQDN
including the trailing dot.
Updates #12618
Change-Id: I04b9b36d2743154aa42f2789149b2733f8555d3f
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
This adds support for generic types and interfaces to our cloner and viewer codegens.
It updates these packages to determine whether to make shallow or deep copies based
on the type parameter constraints. Additionally, if a template parameter or an interface
type has View() and Clone() methods, we'll use them for getters and the cloner of the
owning structure.
Updates #12736
Signed-off-by: Nick Khyl <nickk@tailscale.com>
This adds a package with GP-related functions and types to be used in the future PRs.
It also updates nrptRuleDatabase to use the new package instead of its own gpNotificationWatcher implementation.
Updates #12687
Signed-off-by: Nick Khyl <nickk@tailscale.com>
While `clientupdate.Updater` won't be able to apply updates on macsys,
we use `clientupdate.CanAutoUpdate` to gate the EditPrefs endpoint in
localAPI. We should allow the GUI client to set AutoUpdate.Apply on
macsys for it to properly get reported to the control plane. This also
allows the tailnet-wide default for auto-updates to propagate to macsys
clients.
Updates https://github.com/tailscale/corp/issues/21339
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
cmd/k8s-operator,ssh/tailssh,tsnet: optionally record kubectl exec sessions
The Kubernetes operator's API server proxy, when it receives a request
for 'kubectl exec' session now reads 'RecorderAddrs', 'EnforceRecorder'
fields from tailcfg.KubernetesCapRule.
If 'RecorderAddrs' is set to one or more addresses (of a tsrecorder instance(s)),
it attempts to connect to those and sends the session contents
to the recorder before forwarding the request to the kube API
server. If connection cannot be established or fails midway,
it is only allowed if 'EnforceRecorder' is not true (fail open).
Updates tailscale/corp#19821
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Co-authored-by: Maisem Ali <maisem@tailscale.com>
cmd/containerboot,cmd/k8s-operator: enable IPv6 for fqdn egress proxies
Don't skip installing egress forwarding rules for IPv6 (as long as the host
supports IPv6), and set headless services `ipFamilyPolicy` to
`PreferDualStack` to optionally enable both IP families when possible. Note
that even with `PreferDualStack` set, testing a dual-stack GKE cluster with
the default DNS setup of kube-dns did not correctly set both A and
AAAA records for the headless service, and instead only did so when
switching the cluster DNS to Cloud DNS. For both IPv4 and IPv6 to work
simultaneously in a dual-stack cluster, we require headless services to
return both A and AAAA records.
If the host doesn't support IPv6 but the FQDN specified only has IPv6
addresses available, containerboot will exit with error code 1 and an
error message because there is no viable egress route.
Fixes#12215
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
This change expands the `exit-node list -filter` command to display all
location based exit nodes for the filtered country. This allows users
to switch to alternative servers when our recommended exit node is not
working as intended.
This change also makes the country filter matching case insensitive,
e.g. both USA and usa will work.
Updates #12698
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
In hopes it'll be found more.
Updates tailscale/corp#20844
Change-Id: Ic92ee9908f45b88f8770de285f838333f9467465
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
A few other minor language updates.
Updates tailscale/corp#20844
Change-Id: Idba85941baa0e2714688cc8a4ec3e242e7d1a362
Signed-off-by: James Tucker <james@tailscale.com>
The exit node suggestion CLI command was written with the assumption
that it's possible to provide a stableid on the command line, but this
is incorrect. Instead, it will now emit the name of the exit node.
Fixes#12618
Change-Id: Id7277f395b5fca090a99b0d13bfee7b215bc9802
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
stunstamp now sends data to Prometheus via remote write, and Prometheus
can serve the same data. Retaining and cleaning up old data in sqlite
leads to long probing pauses, and it's not worth investing more effort
to optimize the schema and/or concurrency model.
Updates tailscale/corp#20344
Signed-off-by: Jordan Whited <jordan@tailscale.com>
PeerPresentFlags was added in 5ffb2668ef but wasn't plumbed through to
the RunConnectionLoop. Rather than add yet another parameter (as
IP:port was added earlier), pass in the raw PeerPresentMessage and
PeerGoneMessage struct values, which are the same things, plus two
fields: PeerGoneReasonType for gone and the PeerPresentFlags from
5ffb2668ef.
Updates tailscale/corp#17816
Change-Id: Ib19d9f95353651ada90656071fc3656cf58b7987
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This adds the ability to "peek" at the value of a SyncValue, so that
it's possible to observe a value without computing this.
Updates tailscale/corp#17122
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Co-authored-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I06f88c22a1f7ffcbc7ff82946335356bb0ef4622
This is implemented via GetBestInterfaceEx. Should we encounter errors
or fail to resolve a valid, non-Tailscale interface, we fall back to
returning the index for the default interface instead.
Fixes#12551
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
Timeouts could already be identified as NaN values on
stunstamp_derp_stun_rtt_ns, but we can't use NaN effectively with
promql to visualize them. So, this commit adds a timeouts metric that
we can use with rate/delta/etc promql functions.
Updates tailscale/corp#20689
Signed-off-by: Jordan Whited <jordan@tailscale.com>
This actually performs a Noise request in the 'debug ts2021' command,
instead of just exiting once we've dialed a connection. This can help
debug certain forms of captive portals and deep packet inspection that
will allow a connection, but will RST the connection when trying to send
data on the post-upgraded TCP connection.
Updates #1634
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I1e46ca9c9a0751c55f16373a6a76cdc24fec1f18
So that it can be later used in the 'tailscale debug ts2021' function in
the CLI, to aid in debugging captive portals/WAFs/etc.
Updates #1634
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Iec9423f5e7570f2c2c8218d27fc0902137e73909
Updates tailscale/corp#20969
Right now, when netcheck starts, it asks tailscaled for a copy of the DERPMap. If it doesn't have one, it makes a HTTPS request to controlplane.tailscale.com to fetch one.
This will always fail if you're on a network with a captive portal actively blocking HTTPS traffic. The code appears to hang entirely because the http.Client doesn't have a Timeout set. It just sits there waiting until the request succeeds or fails.
This adds a timeout of 10 seconds, and logs more details about the status of the HTTPS request.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
This is useful during maintenance as a method for shedding home client
load.
Updates tailscale/corp#20689
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Adds a new TailscaleProxyReady condition type for use in corev1.Service
conditions.
Also switch our CRDs to use metav1.Condition instead of
ConnectorCondition. The Go structs are seralized identically, but it
updates some descriptions and validation rules. Update k8s
controller-tools and controller-runtime deps to fix the documentation
generation for metav1.Condition so that it excludes comments and
TODOs.
Stop expecting the fake client to populate TypeMeta in tests. See
kubernetes-sigs/controller-runtime#2633 for details of the change.
Finally, make some minor improvements to validation for service hostnames.
Fixes#12216
Co-authored-by: Irbe Krumina <irbe@tailscale.com>
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Previously, we were registering TCP and UDP connections in the same map,
which could result in erroneously removing a mapping if one of the two
connections completes while the other one is still active.
Add a "proto string" argument to these functions to avoid this.
Additionally, take the "proto" argument in LocalAPI, and plumb that
through from the CLI and add a new LocalClient method.
Updates tailscale/corp#20600
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I35d5efaefdfbf4721e315b8ca123f0c8af9125fb
* cmd/containerboot: store device ID before setting up proxy routes.
For containerboot instances whose state needs to be stored
in a Kubernetes Secret, we additonally store the device's
ID, FQDN and IPs.
This is used, between other, by the Kubernetes operator,
who uses the ID to delete the device when resources need
cleaning up and writes the FQDN and IPs on various kube
resource statuses for visibility.
This change shifts storing device ID earlier in the proxy setup flow,
to ensure that if proxy routing setup fails,
the device can still be deleted.
Updates tailscale/tailscale#12146
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* code review feedback
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
---------
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
We do not support specific version updates or track switching on macOS.
Do not populate the flag to avoid confusion.
Updates #cleanup
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This moves NewContainsIPFunc from tsaddr to new ipset package.
And wgengine/filter types gets split into wgengine/filter/filtertype,
so netmap (and thus the CLI, etc) doesn't need to bring in ipset,
bart, etc.
Then add a test making sure the CLI deps don't regress.
Updates #1278
Change-Id: Ia246d6d9502bbefbdeacc4aef1bed9c8b24f54d5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
NewContainsIPFunc was previously documented as performing poorly if
there were many netip.Prefixes to search over. As such, we never it used it
in such cases.
This updates it to use bart at a certain threshold (over 6 prefixes,
currently), at which point the bart lookup overhead pays off.
This is currently kinda useless because we're not using it. But now we
can and get wins elsewhere. And we can remove the caveat in the docs.
goos: darwin
goarch: arm64
pkg: tailscale.com/net/tsaddr
│ before │ after │
│ sec/op │ sec/op vs base │
NewContainsIPFunc/empty-8 2.215n ± 11% 2.239n ± 1% +1.08% (p=0.022 n=10)
NewContainsIPFunc/cidr-list-1-8 17.44n ± 0% 17.59n ± 6% +0.89% (p=0.000 n=10)
NewContainsIPFunc/cidr-list-2-8 27.85n ± 0% 28.13n ± 1% +1.01% (p=0.000 n=10)
NewContainsIPFunc/cidr-list-3-8 36.05n ± 0% 36.56n ± 13% +1.41% (p=0.000 n=10)
NewContainsIPFunc/cidr-list-4-8 43.73n ± 0% 44.38n ± 1% +1.50% (p=0.000 n=10)
NewContainsIPFunc/cidr-list-5-8 51.61n ± 2% 51.75n ± 0% ~ (p=0.101 n=10)
NewContainsIPFunc/cidr-list-10-8 95.65n ± 0% 68.92n ± 0% -27.94% (p=0.000 n=10)
NewContainsIPFunc/one-ip-8 4.466n ± 0% 4.469n ± 1% ~ (p=0.491 n=10)
NewContainsIPFunc/two-ip-8 8.002n ± 1% 7.997n ± 4% ~ (p=0.697 n=10)
NewContainsIPFunc/three-ip-8 27.98n ± 1% 27.75n ± 0% -0.82% (p=0.012 n=10)
geomean 19.60n 19.07n -2.71%
Updates #12486
Change-Id: I2e2320cc4384f875f41721374da536bab995c1ce
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This abstraction provides a nicer way to work with
maps of slices without having to write out three long type
params.
This also allows it to provide an AsMap implementation which
copies the map and the slices at least.
Updates tailscale/corp#20910
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Without this rule, Windows 8.1 and newer devices issue parallel DNS requests to DNS servers
associated with all network adapters, even when "Override local DNS" is enabled and/or
a Mullvad exit node is being used, resulting in DNS leaks.
This also adds "disable-local-dns-override-via-nrpt" nodeAttr that can be used to disable
the new behavior if needed.
Fixestailscale/corp#20718
Signed-off-by: Nick Khyl <nickk@tailscale.com>
S4U logons do not automatically load the associated user profile. In this
PR we add UserProfile to handle that part. Windows docs indicate that
we should try to resolve a remote profile path when present, so we attempt
to do so when the local computer is joined to a domain.
Updates #12383
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
This commit introduces a userspace program for managing an experimental
eBPF XDP STUN server program. derp/xdp contains the eBPF pseudo-C along
with a Go pkg for loading it and exporting its metrics.
cmd/xdpderper is a package main user of derp/xdp.
Updates tailscale/corp#20689
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Nick Khyl
Andrew Lytvynov
Lee Briggs
Irbe Krumina
Adrian Dewhurst
Linus Brogan
Brad Fitzpatrick
Maisem Ali
Tom Proctor
Charlotte Brandhorst-Satzkorn
Jordan Whited
James Tucker
Josh McKinney
Andrew Dunham
Aaron Klotz
Kristoffer Dalby
Andrea Gottardo