After some analysis, stateful filtering is only necessary in tailnets
that use `autogroup:danger-all` in `src` in ACLs. And in those cases
users explicitly specify that hosts outside of the tailnet should be
able to reach their nodes. To fix local DNS breakage in containers, we
disable stateful filtering by default.
Updates #12108
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This change updates the existing api.md TOC links to point at the new
publicapi folder/files. It also removes the body of the docs from the
file, to avoid the docs becoming out of sync.
This change also renames overview.md to readme.md.
Updates tailscale/corp#19526
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
It was requested by the first customer 4-5 years ago and only used
for a brief moment of time. We later added netmap visibility trimming
which removes the need for this.
It's been hidden by the CLI for quite some time and never documented
anywhere else.
This keeps the CLI flag, though, out of caution. It just returns an
error if it's set to anything but true (its default).
Fixes#12058
Change-Id: I7514ba572e7b82519b04ed603ff9f3bdbaecfda7
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Updates #12172 (then need to update other repos)
Change-Id: I439f65e0119b09e00da2ef5c7a4f002f93558578
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This change includes the device and user invites API docs in the
new publicapi documentation structure.
Updates tailscale/corp#19526
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
Palo Alto firewalls have a typically hard NAT, but also have a mode
called Persistent DIPP that is supposed to provide consistent port
mapping suitable for STUN resolution of public ports. Persistent DIPP
works initially on most Palo Alto firewalls, but some models/software
versions have a bug which this works around.
The bug symptom presents as follows:
- STUN sessions resolve a consistent public IP:port to start with
- Much later netchecks report the same IP:Port for a subset of
sessions, most often the users active DERP, and/or the port related
to sustained traffic.
- The broader set of DERPs in a full netcheck will now consistently
observe a new IP:Port.
- After this point of observation, new inbound connections will only
succeed to the new IP:Port observed, and existing/old sessions will
only work to the old binding.
In this patch we now advertise the lowest latency global endpoint
discovered as we always have, but in addition any global endpoints that
are observed more than once in a single netcheck report. This should
provide viable endpoints for potential connection establishment across
a NAT with this behavior.
Updates tailscale/corp#19106
Signed-off-by: James Tucker <james@tailscale.com>
This change creates a new folder called publicapi that will become the
future home to the Tailscale public API docs.
This change also splits the existing API docs (still located in api.md)
into separate files, for easier reading and contribution.
Updates tailscale/corp#19526
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
Fixestailscale/tailscale#10393Fixestailscale/corp#15412Fixestailscale/corp#19808
On Apple platforms, exit nodes and subnet routers have been unable to relay pings from Tailscale devices to non-Tailscale devices due to sandbox restrictions imposed on our network extensions by Apple. The sandbox prevented the code in netstack.go from spawning the `ping` process which we were using.
Replace that exec call with logic to send an ICMP echo request directly, which appears to work in userspace, and not trigger a sandbox violation in the syslog.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
Tracking down the side effect can otherwise be a pain, for example on
Darwin an empty GOOS resulted in CGO being implicitly disabled. The user
intended for `export GOOS=` to act like unset, and while this is a
misunderstanding, the main toolchain would treat it this way.
Fixestailscale/corp#20059
Signed-off-by: James Tucker <james@tailscale.com>
This reverts commit e3dec086e6.
Going to reuse Meta instead as that is already exported.
Updates tailscale/corp#1297
Signed-off-by: Maisem Ali <maisem@tailscale.com>
In this commit I updated the Ipv6 range we use to generate Control D DOH ip, we were using the NextDNSRanges to generate Control D DOH ip, updated to use the correct range.
Updates: #7946
Signed-off-by: Kevin Liang <kevinliang@tailscale.com>
In a configuration where the local node (ip1) has a different IP (ip2)
that it uses to communicate with a peer (ip3) we would do UDP flow
tracking on the `ip2->ip3` tuple. When we receive the response from
the peer `ip3->ip2` we would dnat it back to `ip3->ip1` which would
then not match the flow track state and the packet would get dropped.
To fix this, we should do flow tracking on the `ip1->ip3` tuple instead
of `ip2->ip3` which requires doing SNAT after the running filterPacketOutboundToWireGuard.
Updates tailscale/corp#19971, tailscale/corp#8020
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Fixestailscale/corp#19979
A build with version number 275 was uploaded to the App Store without bumping OSS first. The presence of that build is causing any 274.* build to be rejected. To address this, added -1 to the year component, which means new builds will use the 275.* prefix.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
Without changing behaviour, don't create a goroutine per connection that
sits and sleeps, but rather use a timer that wakes up and gathers
statistics on a regular basis.
Fixes#12127
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ibc486447e403070bdc3c2cd8ae340e7d02854f21
* util/linuxfw: fix IPv6 NAT availability check for nftables
When running firewall in nftables mode,
there is no need for a separate NAT availability check
(unlike with iptables, there are no hosts that support nftables, but not IPv6 NAT - see tailscale/tailscale#11353).
This change fixes a firewall NAT availability check that was using the no-longer set ipv6NATAvailable field
by removing the field and using a method that, for nftables, just checks that IPv6 is available.
Updates tailscale/tailscale#12008
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
The previous LocalBackend & CLI 'up' changes improved some stuff, but
might've been too aggressive in some edge cases.
This simplifies the authURL vs authURLSticky distinction and removes
the interact field, which seemed to just just be about duplicate URL
suppression in IPN bus, back from when the IPN bus was a single client
at a time. This moves that suppression to a different spot.
Fixes#12119
Updates #12028
Updates #12042
Change-Id: I1f8800b1e82ccc1c8a0d7abba559e7404ddf41e4
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This was a typo in 2e19790f61.
It should have been on `Map` and not on `*Map` as otherwise
it doesn't allow for chaining like `someView.SomeMap().AsMap()`
and requires first assigning it to a variable.
Updates #typo
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This adds a new `UserLogf` field to the `Server` struct.
When set this any logs generated by Server are logged using
`UserLogf` and all spammy backend logs are logged to `Logf`.
If it `UserLogf` is unset, we default to `log.Printf` and
if `Logf` is unset we discard all the spammy logs.
Fixes#12094
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Clients often perform a PROPFIND for the parent directory before
performing PROPFIND for specific children within that directory.
The PROPFIND for the parent directory is usually done at depth 1,
meaning that we already have information for all of the children.
By immediately adding that to the cache, we save a roundtrip to
the remote peer on the PROPFIND for the specific child.
Updates tailscale/corp#19779
Signed-off-by: Percy Wegmann <percy@tailscale.com>
Turn off stateful filtering for egress proxies to allow cluster
traffic to be forwarded to tailnet.
Allow configuring stateful filter via tailscaled config file.
Deprecate EXPERIMENTAL_TS_CONFIGFILE_PATH env var and introduce a new
TS_EXPERIMENTAL_VERSIONED_CONFIG env var that can be used to provide
containerboot a directory that should contain one or more
tailscaled config files named cap-<tailscaled-cap-version>.hujson.
Containerboot will pick the one with the newest capability version
that is not newer than its current capability version.
Proxies with this change will not work with older Tailscale
Kubernetes operator versions - users must ensure that
the deployed operator is at the same version or newer (up to
4 version skew) than the proxies.
Updates tailscale/tailscale#12061
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Co-authored-by: Maisem Ali <maisem@tailscale.com>
When Docker is detected on the host and stateful filtering is enabled,
Docker containers may be unable to reach Tailscale nodes (depending on
the network settings of a container). Detect Docker when stateful
filtering is enabled and print a health warning to aid users in noticing
this issue.
We avoid printing the warning if the current node isn't advertising any
subnet routes and isn't an exit node, since without one of those being
true, the node wouldn't have the correct AllowedIPs in WireGuard to
allow a Docker container to connect to another Tailscale node anyway.
Updates #12070
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Idef538695f4d101b0ef6f3fb398c0eaafc3ae281
We were missing `snat-subnet-routes`, `stateful-filtering`
and `netfilter-mode`. Add those to set too.
Fixes#12061
Signed-off-by: Maisem Ali <maisem@tailscale.com>
We are now publishing nameserver images to tailscale/k8s-nameserver,
so we can start defaulting the images if users haven't set
them explicitly, same as we already do with proxy images.
The nameserver images are currently only published for unstable
track, so we have to use the static 'unstable' tag.
Once we start publishing to stable, we can make the operator
default to its own tag (because then we'll know that for each
operator tag X there is also a nameserver tag X as we always
cut all images for a given tag.
Updates tailscale/tailscale#10499
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Previously, a node that was advertising a 4via6 route wouldn't be able
to make use of that same route; the packet would be delivered to
Tailscale, but since we weren't accepting it in handleLocalPackets, the
packet wouldn't be delivered to netstack and would never hit the 4via6
logic. Let's add that support so that usage of 4via6 is consistent
regardless of where the connection is initiated from.
Updates #11304
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ic28dc2e58080d76100d73b93360f4698605af7cb
The CLI's "up" is kinda chaotic and LocalBackend.Start is kinda
chaotic and they both need to be redone/deleted (respectively), but
this fixes some buggy behavior meanwhile. We were previously calling
StartLoginInteractive (to start the controlclient's RegisterRequest)
redundantly in some cases, causing test flakes depending on timing and
up's weird state machine.
We only need to call StartLoginInteractive in the client if Start itself
doesn't. But Start doesn't tell us that. So cheat a bit and a put the
information about whether there's a current NodeKey in the ipn.Status.
It used to be accessible over LocalAPI via GetPrefs as a private key but
we removed that for security. But a bool is fine.
So then only call StartLoginInteractive if that bool is false and don't
do it in the WatchIPNBus loop.
Fixes#12028
Updates #12042
Change-Id: I0923c3f704a9d6afd825a858eb9a63ca7c1df294
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
There was a small window in ipnserver after we assigned a LocalBackend
to the ipnserver's atomic but before we Start'ed it where our
initalization Start could conflict with API calls from the LocalAPI.
Simplify that a bit and lay out the rules in the docs.
Updates #12028
Change-Id: Ic5f5e4861e26340599184e20e308e709edec68b1
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We used to Lock, Unlock, Lock, Unlock quite a few
times in Start resulting in all sorts of weird race
conditions. Simplify it all and only Lock/Unlock once.
Updates #11649
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This removes one of the Lock,Unlock,Lock,Unlock at least in
the Start function. Still has 3 more of these.
Updates #11649
Signed-off-by: Maisem Ali <maisem@tailscale.com>
It was documented as such but seems to have been dropped in a
refactor, restore the behavior. This brings down the time it
takes to run a single integration test by 2s which adds up
quite a bit.
Updates tailscale/corp#19786
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Andrew Lytvynov
License Updater
Charlotte Brandhorst-Satzkorn
Brad Fitzpatrick
Andrew Dunham
Charlotte Brandhorst-Satzkorn
Jordan Whited
James Tucker
Andrea Gottardo
Percy Wegmann
Irbe Krumina
Maisem Ali
Sonia Appasamy
Kevin Liang
Parker Higgins
Claire Wang
Anton Tolchanov
Nick O'Neill