Updates tailscale/tailscale#1634
This PR introduces a new `captive-portal-detected` Warnable which is set to an unhealthy state whenever a captive portal is detected on the local network, preventing Tailscale from connecting.
ipn/ipnlocal: fix captive portal loop shutdown
Change-Id: I7cafdbce68463a16260091bcec1741501a070c95
net/captivedetection: fix mutex misuse
ipn/ipnlocal: ensure that we don't fail to start the timer
Change-Id: I3e43fb19264d793e8707c5031c0898e48e3e7465
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
If we get an non-disco presumably-wireguard-encrypted UDP packet from
an IP:port we don't recognize, rather than drop the packet, give it to
WireGuard anyway and let WireGuard try to figure out who it's from and
tell us.
This uses the new hook added in https://github.com/tailscale/wireguard-go/pull/27
Updates tailscale/corp#20732
Change-Id: I5c61a40143810592f9efac6c12808a87f924ecf2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This adds support for generic types and interfaces to our cloner and viewer codegens.
It updates these packages to determine whether to make shallow or deep copies based
on the type parameter constraints. Additionally, if a template parameter or an interface
type has View() and Clone() methods, we'll use them for getters and the cloner of the
owning structure.
Updates #12736
Signed-off-by: Nick Khyl <nickk@tailscale.com>
If an optional `hwaddrs` URL parameter is present, add network interface
hardware addresses to the posture identity response.
Just like with serial numbers, this requires client opt-in via MDM or
`tailscale set --posture-checking=true`
(https://tailscale.com/kb/1326/device-identity)
Updates tailscale/corp#21371
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
For testing. Lee wants to play with 'AWS Global Accelerator Custom
Routing with Amazon Elastic Kubernetes Service'. If this works well
enough, we can promote it.
Updates #12578
Change-Id: I5018347ed46c15c9709910717d27305d0aedf8f4
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The DERP Return Path Optimization (DRPO) is over four years old (and
on by default for over two) and we haven't had problems, so time to
remove the emergency shutoff code (controlknob) which we've never
used. The controlknobs are only meant for new features, to mitigate
risk. But we don't want to keep them forever, as they kinda pollute
the code.
Updates #150
Change-Id: If021bc8fd1b51006d8bddd1ffab639bb1abb0ad1
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The control plane hasn't sent it to clients in ages.
Updates tailscale/corp#20965
Change-Id: I1d71a4b6dd3f75010a05c544ee39827837c30772
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This abstraction provides a nicer way to work with
maps of slices without having to write out three long type
params.
This also allows it to provide an AsMap implementation which
copies the map and the slices at least.
Updates tailscale/corp#20910
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Without this rule, Windows 8.1 and newer devices issue parallel DNS requests to DNS servers
associated with all network adapters, even when "Override local DNS" is enabled and/or
a Mullvad exit node is being used, resulting in DNS leaks.
This also adds "disable-local-dns-override-via-nrpt" nodeAttr that can be used to disable
the new behavior if needed.
Fixestailscale/corp#20718
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Fixestailscale/corp#18366.
This PR provides serial number collection on iOS, by allowing system administrators to pass a `DeviceSerialNumber` MDM key which can be read by the `posture` package in Go.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
We do not intend to use this value for feature support communication in
the future, and have applied changes elsewhere that now fix the expected
value.
Updates tailscale/corp#19391
Updates tailscale/corp#20398
Signed-off-by: James Tucker <james@tailscale.com>
Add an additional RecorderAddrs field to tailscale.com/cap/kubernetes
capability. RecorderAddrs will only be populated by control
with the addresses of any tsrecorder tags set via Recorder.
Updates tailscale/corp#19821
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
This PR is in prep of adding logic to control to be able to parse
tailscale.com/cap/kubernetes grants in control:
- moves the type definition of PeerCapabilityKubernetes cap to a location
shared with control.
- update the Kubernetes cap rule definition with fields for granting
kubectl exec session recording capabilities.
- adds a convenience function to produce tailcfg.RawMessage from an
arbitrary cap rule and a test for it.
An example grant defined via ACLs:
"grants": [{
"src": ["tag:eng"],
"dst": ["tag:k8s-operator"],
"app": {
"tailscale.com/cap/kubernetes": [{
"recorder": ["tag:my-recorder"]
“enforceRecorder”: true
}],
},
}
]
This grant enforces `kubectl exec` sessions from tailnet clients,
matching `tag:eng` via API server proxy matching `tag:k8s-operator`
to be recorded and recording to be sent to a tsrecorder instance,
matching `tag:my-recorder`.
The type needs to be shared with control because we want
control to parse this cap and resolve tags to peer IPs.
Updates tailscale/corp#19821
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Updates corp#15802.
Adds the ability for control to disable the recently added change that uses split DNS in more cases on iOS. This will allow us to disable the feature if it leads to regression in production. We plan to remove this knob once we've verified that the feature works properly.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
This is done in preparation for adding kubectl
session recording rules to this capability grant that will need to
be unmarshalled by control, so will also need to be
in a shared location.
Updates tailscale/corp#19821
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
This allows pam authentication to run for ssh sessions, triggering
automation like pam_mkhomedir.
Updates #11854
Signed-off-by: Percy Wegmann <percy@tailscale.com>
Updates #12172 (then need to update other repos)
Change-Id: I439f65e0119b09e00da2ef5c7a4f002f93558578
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This adds a new bool that can be sent down from control
to do jailing on the client side. Previously this would
only be done from control by modifying the packet filter
we sent down to clients. This would result in a lot of
additional work/CPU on control, we could instead just
do this on the client. This has always been a TODO which
we keep putting off, might as well do it now.
Updates tailscale/corp#19623
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Now that tsdial.Dialer.UserDial has been updated to honor the configured routes
and dial external network addresses without going through Tailscale, while also being
able to dial a node/subnet router on the tailnet, we can start using UserDial to forward
DNS requests. This is primarily needed for DNS over TCP when forwarding requests
to internal DNS servers, but we also update getKnownDoHClientForProvider to use it.
Updates tailscale/corp#18725
Signed-off-by: Nick Khyl <nickk@tailscale.com>
We'd like to use tsdial.Dialer.UserDial instead of SystemDial for DNS over TCP.
This is primarily necessary to properly dial internal DNS servers accessible
over Tailscale and subnet routes. However, to avoid issues when switching
between Wi-Fi and cellular, we need to ensure that we don't retain connections
to any external addresses on the old interface. Therefore, we need to determine
which dialer to use internally based on the configured routes.
This plumbs routes and localRoutes from router.Config to tsdial.Dialer,
and updates UserDial to use either the peer dialer or the system dialer,
depending on the network address and the configured routes.
Updates tailscale/corp#18725
Fixes#4529
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Add node attribute to determine whether or not to show suggested exit
node in UI.
Updates tailscale/corp#19515
Signed-off-by: Claire Wang <claire@tailscale.com>
When an app connector is reconfigured and domains to route are removed,
we would like to no longer advertise routes that were discovered for
those domains. In order to do this we plan to store which routes were
discovered for which domains.
Add a controlknob so that we can enable/disable the new behavior.
Updates #11008
Signed-off-by: Fran Bull <fran@tailscale.com>
This improves convenience and security.
* Convenience - no need to see nodes that can't share anything with you.
* Security - malicious nodes can't expose shares to peers that aren't
allowed to access their shares.
Updates tailscale/corp#19432
Signed-off-by: Percy Wegmann <percy@tailscale.com>
We were storing server-side lots of:
"Auth":{"Provider":"","LoginName":"","Oauth2Token":null,"AuthKey":""},
That was about 7% of our total storage of pending RegisterRequest
bodies.
Updates tailscale/corp#19327
Change-Id: Ib73842759a2b303ff5fe4c052a76baea0d68ae7d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This change switches the api to /drive, rather than the previous /tailfs
as well as updates the log lines to reflect the new value. It also
cleans up some existing tailfs references.
Updates tailscale/corp#16827
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
This change updates all tailfs functions and the majority of the tailfs
variables to use the new drive naming.
Updates tailscale/corp#16827
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
This change updates the tailfs file and package names to their new
naming convention.
Updates #tailscale/corp#16827
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
First we had Capabilities []string. Then
https://tailscale.com/blog/acl-grants (#4217) brought CapMap, a
superset of Capabilities. Except we never really finished the
transition inside the codebase to go all-in on CapMap. This does so.
Notably, this coverts Capabilities on the wire early to CapMap
internally so the code can only deal in CapMap, even against an old
control server.
In the process, this removes PeerChange.Capabilities support, which no
known control plane sent anyway. They can and should use
PeerChange.CapMap instead.
Updates #11508
Updates #4217
Change-Id: I872074e226b873f9a578d9603897b831d50b25d9
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Add a disable-web-client node attribute and add handling for disabling
the web client when this node attribute is set.
Updates https://github.com/tailscale/tailscale/issues/10261
Signed-off-by: Mario Minardi <mario@tailscale.com>
bump version for adding NodeAttrSuggestExitNode
remove extra s from NodeAttrSuggestExitNode
Updates tailscale/corp#17516
Signed-off-by: Claire Wang <claire@tailscale.com>
Instead of modeling remote WebDAV servers as actual
webdav.FS instances, we now just proxy traffic to them.
This not only simplifies the code, but it also allows
WebDAV locking to work correctly by making sure locks are
handled by the servers that need to (i.e. the ones actually
serving the files).
Updates tailscale/corp#16827
Signed-off-by: Percy Wegmann <percy@tailscale.com>
Andrea Gottardo
Brad Fitzpatrick
Nick Khyl
Anton Tolchanov
Percy Wegmann
Maisem Ali
James Tucker
Irbe Krumina
Andrew Dunham
Andrew Lytvynov
Claire Wang
Fran Bull
Adrian Dewhurst
Charlotte Brandhorst-Satzkorn
Mario Minardi