updates tailscale/corp#21823
Misconfigured, broken, or blocked DNS will often present as
"internet is broken'" to the end user. This plumbs the health tracker
into the dns manager and forwarder and adds a health warning
with a 5 second delay that is raised on failures in the forwarder and
lowered on successes.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
Fixestailscale/tailscale#12794
We were printing some leftover debug logs within a callback function that would be executed after the test completion, causing the test to fail. This change drops the log calls to address the issue.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
Updates tailscale/tailscale#4136
To reduce the likelihood of presenting spurious warnings, add the ability to delay the visibility of certain Warnables, based on a TimeToVisible time.Duration field on each Warnable. The default is zero, meaning that a Warnable is immediately visible to the user when it enters an unhealthy state.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
Updates tailscale/tailscale#4136
We should make sure to send the value of ImpactsConnectivity over to the clients using LocalAPI as they need it to display alerts in the GUI properly.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
Updates tailscale/tailscale#4136
High severity health warning = a system notification will appear, which can be quite disruptive to the user and cause unnecessary concern in the event of a temporary network issue.
Per design decision (@sonovawolf), the severity of all warnings but "network is down" should be tuned down to medium/low. ImpactsConnectivity should be set, to change the icon to an exclamation mark in some cases, but without a notification bubble.
I also tweaked the messaging for update-available, to reflect how each platform gets updates in different ways.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
When auto-udpates are enabled, we don't need to nag users to update
after a new release, before we release auto-updates.
Updates https://github.com/tailscale/corp/issues/20081
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Looks like a DERPmap might not be available when we try to get the
name associated with a region ID, and that was causing an intermittent
panic in CI.
Fixes#12534
Change-Id: I4ace53681bf004df46c728cff830b27339254243
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
Fixestailscale/corp#20971
We added some Warnables for DERP failure situations, but their Text currently spits out the DERP region ID ("10") in the UI, which is super ugly. It would be better to provide the RegionName of the DERP region that is failing. We can do so by storing a reference to the last-known DERP map in the health package whenever we fetch one, and using it when generating the notification text.
This way, the following message...
> Tailscale could not connect to the relay server '10'. The server might be temporarily unavailable, or your Internet connection might be down.
becomes:
> Tailscale could not connect to the 'Seattle' relay server. The server might be temporarily unavailable, or your Internet connection might be down.
which is a lot more user-friendly.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
Updates #4136
Small PR to expose the health Warnables dependencies to the GUI via LocalAPI, so that we can only show warnings for root cause issues, and filter out unnecessary messages before user presentation.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
Updates tailscale/tailscale#4136
This PR is the first round of work to move from encoding health warnings as strings and use structured data instead. The current health package revolves around the idea of Subsystems. Each subsystem can have (or not have) a Go error associated with it. The overall health of the backend is given by the concatenation of all these errors.
This PR polishes the concept of Warnable introduced by @bradfitz a few weeks ago. Each Warnable is a component of the backend (for instance, things like 'dns' or 'magicsock' are Warnables). Each Warnable has a unique identifying code. A Warnable is an entity we can warn the user about, by setting (or unsetting) a WarningState for it. Warnables have:
- an identifying Code, so that the GUI can track them as their WarningStates come and go
- a Title, which the GUIs can use to tell the user what component of the backend is broken
- a Text, which is a function that is called with a set of Args to generate a more detailed error message to explain the unhappy state
Additionally, this PR also begins to send Warnables and their WarningStates through LocalAPI to the clients, using ipn.Notify messages. An ipn.Notify is only issued when a warning is added or removed from the Tracker.
In a next PR, we'll get rid of subsystems entirely, and we'll start using structured warnings for all errors affecting the backend functionality.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
In prep for making health warnings rich objects with metadata rather
than a bunch of strings, start moving it all into the same place.
We'll still ultimately need the stringified form for the CLI and
LocalAPI for compatibility but we'll next convert all these warnings
into Warnables that have severity levels and such, and legacy
stringification will just be something each Warnable thing can do.
Updates #4136
Change-Id: I83e189435daae3664135ed53c98627c66e9e53da
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This adds a health.Tracker to tsd.System, accessible via
a new tsd.System.HealthTracker method.
In the future, that new method will return a tsd.System-specific
HealthTracker, so multiple tsnet.Servers in the same process are
isolated. For now, though, it just always returns the temporary
health.Global value. That permits incremental plumbing over a number
of changes. When the second to last health.Global reference is gone,
then the tsd.System.HealthTracker implementation can return a private
Tracker.
The primary plumbing this does is adding it to LocalBackend and its
dozen and change health calls. A few misc other callers are also
plumbed. Subsequent changes will flesh out other parts of the tree
(magicsock, controlclient, etc).
Updates #11874
Updates #4136
Change-Id: Id51e73cfc8a39110425b6dc19d18b3975eac75ce
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In prep for tsd.System Tracker plumbing throughout tailscaled,
defensively permit all methods on Tracker to accept a nil receiver
without crashing, lest I screw something up later. (A health tracking
system that itself causes crashes would be no good.) Methods on nil
receivers should not be called, so a future change will also collect
their stacks (and panic during dev/test), but we should at least not
crash in prod.
This also locks that in with a test using reflect to automatically
call all methods on a nil receiver and check they don't crash.
Updates #11874
Updates #4136
Change-Id: I8e955046ebf370ec8af0c1fb63e5123e6282a9d3
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Previously it was both metadata about the class of warnable item as
well as the value.
Now it's only metadata and the value is per-Tracker.
Updates #11874
Updates #4136
Change-Id: Ia1ed1b6c95d34bc5aae36cffdb04279e6ba77015
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This moves most of the health package global variables to a new
`health.Tracker` type.
But then rather than plumbing the Tracker in tsd.System everywhere,
this only goes halfway and makes one new global Tracker
(`health.Global`) that all the existing callers now use.
A future change will eliminate that global.
Updates #11874
Updates #4136
Change-Id: I6ee27e0b2e35f68cb38fecdb3b2dc4c3f2e09d68
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
When reverse path filtering is in strict mode on Linux, using an exit
node blocks all network connectivity. This change adds a warning about
this to `tailscale status` and the logs.
Example in `tailscale status`:
```
- not connected to home DERP region 22
- The following issues on your machine will likely make usage of exit nodes impossible: [interface "eth0" has strict reverse-path filtering enabled], please set rp_filter=2 instead of rp_filter=1; see https://github.com/tailscale/tailscale/issues/3310
```
Example in the logs:
```
2024/02/21 21:17:07 health("overall"): error: multiple errors:
not in map poll
The following issues on your machine will likely make usage of exit nodes impossible: [interface "eth0" has strict reverse-path filtering enabled], please set rp_filter=2 instead of rp_filter=1; see https://github.com/tailscale/tailscale/issues/3310
```
Updates #3310
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
This uses the fact that we've received a frame from a given DERP region
within a certain time as a signal that the region is stil present (and
thus can still be a node's PreferredDERP / home region) even if we don't
get a STUN response from that region during a netcheck.
This should help avoid DERP flaps that occur due to losing STUN probes
while still having a valid and active TCP connection to the DERP server.
RELNOTE=Reduce home DERP flapping when there's still an active connection
Updates #8603
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: If7da6312581e1d434d5c0811697319c621e187a0
I didn't clean up the more idiomatic map[T]bool with true values, at
least yet. I just converted the relatively awkward struct{}-valued
maps.
Updates #cleanup
Change-Id: I758abebd2bb1f64bc7a9d0f25c32298f4679c14f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I'm trying to remove some stuff from the netmap update path.
Updates #1909
Change-Id: Iad2c728dda160cd52f33ef9cf0b75b4940e0ce64
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
When we make a connection to a server, we previously would verify with
the system roots, and then fall back to verifying with our baked-in
Let's Encrypt root if the system root cert verification failed.
We now explicitly check for, and log a health error on, self-signed
certificates. Additionally, we now always verify against our baked-in
Let's Encrypt root certificate and log an error if that isn't
successful. We don't consider this a health failure, since if we ever
change our server certificate issuer in the future older non-updated
versions of Tailscale will no longer be healthy despite being able to
connect.
Updates #3198
Change-Id: I00be5ceb8afee544ee795e3c7a2815476abc4abf
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
This updates all source files to use a new standard header for copyright
and license declaration. Notably, copyright no longer includes a date,
and we now use the standard SPDX-License-Identifier header.
This commit was done almost entirely mechanically with perl, and then
some minimal manual fixes.
Updates #6865
Signed-off-by: Will Norris <will@tailscale.com>
We want users to have the freedom to start tailscaled with `-no-logs-no-support`,
but that is obviously in direct conflict with tailnets that have network logging
enabled.
When we detect that condition, we record the issue in health, notify the client,
set WantRunning=false, and bail.
We clear the item in health when a profile switch occurs, since it is a
per-tailnet condition that should not propagate across profiles.
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
We use this pattern in a number of places (in this repo and elsewhere)
and I was about to add a fourth to this repo which was crossing the line.
Add this type instead so they're all the same.
Also, we have another Set type (SliceSet, which tracks its keys in
order) in another repo we can move to this package later.
Change-Id: Ibbdcdba5443fae9b6956f63990bdb9e9443cefa9
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The health package was turning into a rando dumping ground. Make a new
Warnable type instead that callers can request an instance of, and
then Set it locally in their code without the health package being
aware of all the things that are warnable. (For plenty of things the
health package will want to know details of how Tailscale works so it
can better prioritize/suppress errors, but lots of the warnings are
pretty leaf-y and unrelated)
This just moves two of the health warnings. Can probably move more
later.
Change-Id: I51e50e46eb633f4e96ced503d3b18a1891de1452
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Example output:
# Health check:
# - Some peers are advertising routes but --accept-routes is false
Also, move "tailscale status" health checks to the bottom, where they
won't be lost in large netmaps.
Updates #2053
Updates #6266
Change-Id: I5ae76a0cd69a452ce70063875cd7d974bfeb8f1a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
A new package can also later record/report which knobs are checked and
set. It also makes the code cleaner & easier to grep for env knobs.
Change-Id: Id8a123ab7539f1fadbd27e0cbeac79c2e4f09751
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
One option was to just hide "offline" in the text output, but that
doesn't fix the JSON output.
The next option was to lie and say it's online in the JSON (which then
fixes the "offline" in the text output).
But instead, this sets the self node's "Online" to whether we're in an
active map poll.
Fixes#3564
Change-Id: I9b379989bd14655198959e37eec39bb570fb814a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Lets the systemd-resolved OSConfigurator report health changes
for out of band config resyncs.
Updates #3327
Signed-off-by: David Anderson <danderson@tailscale.com>
github.com/go-multierror/multierror served us well.
But we need a few feature from it (implement Is),
and it's not worth maintaining a fork of such a small module.
Instead, I did a clean room implementation inspired by its API.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
So if the control plane knows that something's broken about the node, it can
include problem(s) in MapResponse and "tailscale status" will show it.
(and GUIs in the future, as it's in ipnstate.Status/JSON)
This also bumps the MapRequest.Version, though it's not strictly
required. Doesn't hurt.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
And add health check errors to ipnstate.Status (tailscale status --json).
Updates #2746
Updates #2775
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
One of the consequences of the bind refactoring in 6f23087175
is that attempting to bind an IPv6 socket will always
result in c.pconn6.pconn being non-nil.
If the bind fails, it'll be set to a placeholder packet conn
that blocks forever.
As a result, we can always run ReceiveIPv6 and health check it.
This removes IPv4/IPv6 asymmetry and also will allow health checks
to detect any IPv6 receive func failures.
Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
Brad Fitzpatrick
Jonathan Nobels
Andrea Gottardo
Andrew Lytvynov
Andrea Gottardo
Anton Tolchanov
Andrew Dunham
Tom DNetto
Will Norris
Aaron Klotz
Jordan Whited
David Anderson
Josh Bleecher Snyder
Josh Bleecher Snyder