In prep for updating to new staticcheck required for Go 1.23.
Updates #12912
Change-Id: If77892a023b79c6fa798f936fc80428fd4ce0673
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
To avoid dig vs nslookup vs $X availability issues between
OSes/distros. And to be in Go, to match the resolver we use.
Updates #13038
Change-Id: Ib7e5c351ed36b5470a42cbc230b8f27eed9a1bf8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The change in b7e48058c8 was too loose; it also captured the CLI
being run as a child process under cmd/tta.
Updates #13038
Updates #1866
Change-Id: Id410b87132938dd38ed4dd3959473c5d0d242ff5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
During review of #8644 the `recover-compromised-key` command was renamed
to `revoke-key`, but the old name remained in some messages printed by
the command.
Fixestailscale/corp#19446
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
Some users run "tailscale cert" in a cron job to renew their
certificates on disk. The time until the next cron job run may be long
enough for the old cert to expire with our default heristics.
Add a `--min-validity` flag which ensures that the returned cert is
valid for at least the provided duration (unless it's longer than the
cert lifetime set by Let's Encrypt).
Updates #8725
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
To match the format of exit node suggestions and ensure that the result
is not ambiguous, relax exit node CLI selection to permit using a FQDN
including the trailing dot.
Updates #12618
Change-Id: I04b9b36d2743154aa42f2789149b2733f8555d3f
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
While `clientupdate.Updater` won't be able to apply updates on macsys,
we use `clientupdate.CanAutoUpdate` to gate the EditPrefs endpoint in
localAPI. We should allow the GUI client to set AutoUpdate.Apply on
macsys for it to properly get reported to the control plane. This also
allows the tailnet-wide default for auto-updates to propagate to macsys
clients.
Updates https://github.com/tailscale/corp/issues/21339
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This change expands the `exit-node list -filter` command to display all
location based exit nodes for the filtered country. This allows users
to switch to alternative servers when our recommended exit node is not
working as intended.
This change also makes the country filter matching case insensitive,
e.g. both USA and usa will work.
Updates #12698
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
The exit node suggestion CLI command was written with the assumption
that it's possible to provide a stableid on the command line, but this
is incorrect. Instead, it will now emit the name of the exit node.
Fixes#12618
Change-Id: Id7277f395b5fca090a99b0d13bfee7b215bc9802
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
This actually performs a Noise request in the 'debug ts2021' command,
instead of just exiting once we've dialed a connection. This can help
debug certain forms of captive portals and deep packet inspection that
will allow a connection, but will RST the connection when trying to send
data on the post-upgraded TCP connection.
Updates #1634
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I1e46ca9c9a0751c55f16373a6a76cdc24fec1f18
So that it can be later used in the 'tailscale debug ts2021' function in
the CLI, to aid in debugging captive portals/WAFs/etc.
Updates #1634
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Iec9423f5e7570f2c2c8218d27fc0902137e73909
Updates tailscale/corp#20969
Right now, when netcheck starts, it asks tailscaled for a copy of the DERPMap. If it doesn't have one, it makes a HTTPS request to controlplane.tailscale.com to fetch one.
This will always fail if you're on a network with a captive portal actively blocking HTTPS traffic. The code appears to hang entirely because the http.Client doesn't have a Timeout set. It just sits there waiting until the request succeeds or fails.
This adds a timeout of 10 seconds, and logs more details about the status of the HTTPS request.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
Previously, we were registering TCP and UDP connections in the same map,
which could result in erroneously removing a mapping if one of the two
connections completes while the other one is still active.
Add a "proto string" argument to these functions to avoid this.
Additionally, take the "proto" argument in LocalAPI, and plumb that
through from the CLI and add a new LocalClient method.
Updates tailscale/corp#20600
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I35d5efaefdfbf4721e315b8ca123f0c8af9125fb
We do not support specific version updates or track switching on macOS.
Do not populate the flag to avoid confusion.
Updates #cleanup
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This fixes an issue where, on containerized environments an upgrade
1.66.3 -> 1.66.4 failed with default containerboot configuration.
This was because containerboot by default runs 'tailscale up'
that requires all previously set flags to be explicitly provided
on subsequent runs and we explicitly set --stateful-filtering
to true on 1.66.3, removed that settingon 1.66.4.
Updates tailscale/tailscale#12307
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Co-authored-by: Andrew Lytvynov <awly@tailscale.com>
- Add current node signature to `ipnstate.NetworkLockStatus`;
- Print current node signature in a human-friendly format as part
of `tailscale lock status`.
Examples:
```
$ tailscale lock status
Tailnet lock is ENABLED.
This node is accessible under tailnet lock. Node signature:
SigKind: direct
Pubkey: [OTB3a]
KeyID: tlpub:44a0e23cd53a4b8acc02f6732813d8f5ba8b35d02d48bf94c9f1724ebe31c943
WrappingPubkey: tlpub:44a0e23cd53a4b8acc02f6732813d8f5ba8b35d02d48bf94c9f1724ebe31c943
This node's tailnet-lock key: tlpub:44a0e23cd53a4b8acc02f6732813d8f5ba8b35d02d48bf94c9f1724ebe31c943
Trusted signing keys:
tlpub:44a0e23cd53a4b8acc02f6732813d8f5ba8b35d02d48bf94c9f1724ebe31c943 1 (self)
tlpub:6fa21d242a202b290de85926ba3893a6861888679a73bc3a43f49539d67c9764 1 (pre-auth key kq3NzejWoS11KTM59)
```
For a node created via a signed auth key:
```
This node is accessible under tailnet lock. Node signature:
SigKind: rotation
Pubkey: [e3nAO]
Nested:
SigKind: credential
KeyID: tlpub:6fa21d242a202b290de85926ba3893a6861888679a73bc3a43f49539d67c9764
WrappingPubkey: tlpub:3623b0412cab0029cb1918806435709b5947ae03554050f20caf66629f21220a
```
For a node that rotated its key a few times:
```
This node is accessible under tailnet lock. Node signature:
SigKind: rotation
Pubkey: [DOzL4]
Nested:
SigKind: rotation
Pubkey: [S/9yU]
Nested:
SigKind: rotation
Pubkey: [9E9v4]
Nested:
SigKind: direct
Pubkey: [3QHTJ]
KeyID: tlpub:44a0e23cd53a4b8acc02f6732813d8f5ba8b35d02d48bf94c9f1724ebe31c943
WrappingPubkey: tlpub:2faa280025d3aba0884615f710d8c50590b052c01a004c2b4c2c9434702ae9d0
```
Updates tailscale/corp#19764
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
Palo Alto reported interpreting hairpin probes as LAND attacks, and the
firewalls may be responding to this by shutting down otherwise in use NAT sessions
prematurely. We don't currently make use of the outcome of the hairpin
probes, and they contribute to other user confusion with e.g. the
AirPort Extreme hairpin session workaround. We decided in response to
remove the whole probe feature as a result.
Updates #188
Updates tailscale/corp#19106
Updates tailscale/corp#19116
Signed-off-by: James Tucker <james@tailscale.com>
After some analysis, stateful filtering is only necessary in tailnets
that use `autogroup:danger-all` in `src` in ACLs. And in those cases
users explicitly specify that hosts outside of the tailnet should be
able to reach their nodes. To fix local DNS breakage in containers, we
disable stateful filtering by default.
Updates #12108
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
It was requested by the first customer 4-5 years ago and only used
for a brief moment of time. We later added netmap visibility trimming
which removes the need for this.
It's been hidden by the CLI for quite some time and never documented
anywhere else.
This keeps the CLI flag, though, out of caution. It just returns an
error if it's set to anything but true (its default).
Fixes#12058
Change-Id: I7514ba572e7b82519b04ed603ff9f3bdbaecfda7
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Palo Alto firewalls have a typically hard NAT, but also have a mode
called Persistent DIPP that is supposed to provide consistent port
mapping suitable for STUN resolution of public ports. Persistent DIPP
works initially on most Palo Alto firewalls, but some models/software
versions have a bug which this works around.
The bug symptom presents as follows:
- STUN sessions resolve a consistent public IP:port to start with
- Much later netchecks report the same IP:Port for a subset of
sessions, most often the users active DERP, and/or the port related
to sustained traffic.
- The broader set of DERPs in a full netcheck will now consistently
observe a new IP:Port.
- After this point of observation, new inbound connections will only
succeed to the new IP:Port observed, and existing/old sessions will
only work to the old binding.
In this patch we now advertise the lowest latency global endpoint
discovered as we always have, but in addition any global endpoints that
are observed more than once in a single netcheck report. This should
provide viable endpoints for potential connection establishment across
a NAT with this behavior.
Updates tailscale/corp#19106
Signed-off-by: James Tucker <james@tailscale.com>
We were missing `snat-subnet-routes`, `stateful-filtering`
and `netfilter-mode`. Add those to set too.
Fixes#12061
Signed-off-by: Maisem Ali <maisem@tailscale.com>
The CLI's "up" is kinda chaotic and LocalBackend.Start is kinda
chaotic and they both need to be redone/deleted (respectively), but
this fixes some buggy behavior meanwhile. We were previously calling
StartLoginInteractive (to start the controlclient's RegisterRequest)
redundantly in some cases, causing test flakes depending on timing and
up's weird state machine.
We only need to call StartLoginInteractive in the client if Start itself
doesn't. But Start doesn't tell us that. So cheat a bit and a put the
information about whether there's a current NodeKey in the ipn.Status.
It used to be accessible over LocalAPI via GetPrefs as a private key but
we removed that for security. But a bool is fine.
So then only call StartLoginInteractive if that bool is false and don't
do it in the WatchIPNBus loop.
Fixes#12028
Updates #12042
Change-Id: I0923c3f704a9d6afd825a858eb9a63ca7c1df294
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This way the default gets populated on first start, when no existing
state exists to migrate. Also fix `ipn.PrefsFromBytes` to preserve empty
fields, rather than layering `NewPrefs` values on top.
Updates https://github.com/tailscale/corp/issues/19623
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
The CLI "up" command is a historical mess, both on the CLI side and
the LocalBackend side. We're getting closer to cleaning it up, but in
the meantime it was again implicated in flaky tests.
In this case, the background goroutine running WatchIPNBus was very
occasionally running enough to get to its StartLoginInteractive call
before the original goroutine did its Start call. That meant
integration tests were very rarely but sometimes logging in with the
default control plane URL out on the internet
(controlplane.tailscale.com) instead of the localhost control server
for tests.
This also might've affected new Headscale etc users on initial "up".
Fixes#11960Fixes#11962
Change-Id: I36f8817b69267a99271b5ee78cb7dbf0fcc0bd34
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This configures localClient correctly during flag parsing, so that the --socket
option is effective when generating tab-completion results. For example, the
following would not connect to the system Tailscale for tab-completion results:
tailscale --socket=/tmp/tailscaled.socket switch <TAB>
Updates #3793
Signed-off-by: Paul Scott <paul@tailscale.com>
In prep for most of the package funcs in net/interfaces to become
methods in a long-lived netmon.Monitor that can cache things. (Many
of the funcs are very heavy to call regularly, whereas the long-lived
netmon.Monitor can subscribe to things from the OS and remember
answers to questions it's asked regularly later)
Updates tailscale/corp#10910
Updates tailscale/corp#18960
Updates #7967
Updates #3299
Change-Id: Ie4e8dedb70136af2d611b990b865a822cd1797e5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This has been a TODO for ages. Time to do it.
The goal is to move more network state accessors to netmon.Monitor
where they can be cheaper/cached.
Updates tailscale/corp#10910
Updates tailscale/corp#18960
Updates #7967
Updates #3299
Change-Id: I60fc6508cd2d8d079260bda371fc08b6318bcaf1
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The approach is lifted from cobra: `tailscale completion bash` emits a bash
script for configuring the shell's autocomplete:
. <( tailscale completion bash )
so that typing:
tailscale st<TAB>
invokes:
tailscale completion __complete -- st
RELNOTE=tailscale CLI now supports shell tab-completion
Fixes#3793
Signed-off-by: Paul Scott <paul@tailscale.com>
Seems to deflake tstest/integration tests. I can't reproduce it
anymore on one of my VMs that was consistently flaking after a dozen
runs before. Now I can run hundreds of times.
Updates #11649Fixes#7036
Change-Id: I2f7d4ae97500d507bdd78af9e92cd1242e8e44b8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Also capitalises the start of all ShortHelp, allows subcommands to be hidden
with a "HIDDEN: " prefix in their ShortHelp, and adds a TS_DUMP_HELP envknob
to look at all --help messages together.
Fixes#11664
Signed-off-by: Paul Scott <paul@tailscale.com>
Brad Fitzpatrick
Anton Tolchanov
Andrew Dunham
Andrew Lytvynov
Adrian Dewhurst
Linus Brogan
Charlotte Brandhorst-Satzkorn
Josh McKinney
Andrea Gottardo
Irbe Krumina
James Tucker
Maisem Ali
Paul Scott
Percy Wegmann
Claire Wang