* cmd/containerboot,kube/services: support the ability to automatically advertise services on startup
Updates #17769
Signed-off-by: chaosinthecrd <tom@tmlabs.co.uk>
* cmd/containerboot: don't assume we want to use kube state store if in kubernetes
Fixes#8188
Signed-off-by: chaosinthecrd <tom@tmlabs.co.uk>
---------
Signed-off-by: chaosinthecrd <tom@tmlabs.co.uk>
This commit fixes an issue within containerboot that arose from the
kubernetes operator. When users enable metrics on custom resources that
are running on dual stack or ipv6 only clusters, they end up with an error
as we pass the hostport combintation using $(POD_IP):PORT.
In go, `netip.ParseAddrPort` expects square brackets `[]` to wrap the host
portion of an ipv6 address and would naturally, crash.
When loading the containerboot configuration from the environment we now
check if the `TS_LOCAL_ADDR_PORT` value contains the pod's v6 ip address.
If it does & does not already contain brackets, we add the brackets in.
Closes: #15762Closes: #15467
Signed-off-by: David Bond <davidsbond93@gmail.com>
This file was never truly necessary and has never actually been used in
the history of Tailscale's open source releases.
A Brief History of AUTHORS files
---
The AUTHORS file was a pattern developed at Google, originally for
Chromium, then adopted by Go and a bunch of other projects. The problem
was that Chromium originally had a copyright line only recognizing
Google as the copyright holder. Because Google (and most open source
projects) do not require copyright assignemnt for contributions, each
contributor maintains their copyright. Some large corporate contributors
then tried to add their own name to the copyright line in the LICENSE
file or in file headers. This quickly becomes unwieldy, and puts a
tremendous burden on anyone building on top of Chromium, since the
license requires that they keep all copyright lines intact.
The compromise was to create an AUTHORS file that would list all of the
copyright holders. The LICENSE file and source file headers would then
include that list by reference, listing the copyright holder as "The
Chromium Authors".
This also become cumbersome to simply keep the file up to date with a
high rate of new contributors. Plus it's not always obvious who the
copyright holder is. Sometimes it is the individual making the
contribution, but many times it may be their employer. There is no way
for the proejct maintainer to know.
Eventually, Google changed their policy to no longer recommend trying to
keep the AUTHORS file up to date proactively, and instead to only add to
it when requested: https://opensource.google/docs/releasing/authors.
They are also clear that:
> Adding contributors to the AUTHORS file is entirely within the
> project's discretion and has no implications for copyright ownership.
It was primarily added to appease a small number of large contributors
that insisted that they be recognized as copyright holders (which was
entirely their right to do). But it's not truly necessary, and not even
the most accurate way of identifying contributors and/or copyright
holders.
In practice, we've never added anyone to our AUTHORS file. It only lists
Tailscale, so it's not really serving any purpose. It also causes
confusion because Tailscalars put the "Tailscale Inc & AUTHORS" header
in other open source repos which don't actually have an AUTHORS file, so
it's ambiguous what that means.
Instead, we just acknowledge that the contributors to Tailscale (whoever
they are) are copyright holders for their individual contributions. We
also have the benefit of using the DCO (developercertificate.org) which
provides some additional certification of their right to make the
contribution.
The source file changes were purely mechanical with:
git ls-files | xargs sed -i -e 's/\(Tailscale Inc &\) AUTHORS/\1 contributors/g'
Updates #cleanup
Change-Id: Ia101a4a3005adb9118051b3416f5a64a4a45987d
Signed-off-by: Will Norris <will@tailscale.com>
Allow for optionally specifying an audience for containerboot. This is
passed to tailscale up to allow for containerboot to use automatic ID
token generation for authentication.
Updates https://github.com/tailscale/corp/issues/34430
Signed-off-by: Mario Minardi <mario@tailscale.com>
In 1.84 we made 'tailscale set'/'tailscale up' error out if duplicate
command line flags are passed.
This broke some container configurations as we have two env vars that
can be used to set --accept-dns flag:
- TS_ACCEPT_DNS- specifically for --accept-dns
- TS_EXTRA_ARGS- accepts any arbitrary 'tailscale up'/'tailscale set'
flag.
We default TS_ACCEPT_DNS to false (to make the container behaviour more
declarative), which with the new restrictive CLI behaviour resulted in
failure for users who had set --accept-dns via TS_EXTRA_ARGS as the flag would be
provided twice.
This PR re-instates the previous behaviour by checking if TS_EXTRA_ARGS
contains --accept-dns flag and if so using its value to override TS_ACCEPT_DNS.
Updates tailscale/tailscale#16108
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
cmd/containerboot,kube/ingressservices: proxy VIPService TCP/UDP traffic to cluster Services
This PR is part of the work to implement HA for Kubernetes Operator's
network layer proxy.
Adds logic to containerboot to monitor mounted ingress firewall configuration rules
and update iptables/nftables rules as the config changes.
Also adds new shared types for the ingress configuration.
The implementation is intentionally similar to that for HA for egress proxy.
Updates tailscale/tailscale#15895
Signed-off-by: chaosinthecrd <tom@tmlabs.co.uk>
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
cmd/containerboot: manage HA Ingress TLS certs from containerboot
When ran as HA Ingress node, containerboot now can determine
whether it should manage TLS certs for the HA Ingress replicas
and call the LocalAPI cert endpoint to ensure initial issuance
and renewal of the shared TLS certs.
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
cmd/{containerboot,k8s-operator},kube: add preshutdown hook for egress PG proxies
This change is part of work towards minimizing downtime during update
rollouts of egress ProxyGroup replicas.
This change:
- updates the containerboot health check logic to return Pod IP in headers,
if set
- always runs the health check for egress PG proxies
- updates ClusterIP Services created for PG egress endpoints to include
the health check endpoint
- implements preshutdown endpoint in proxies. The preshutdown endpoint
logic waits till, for all currently configured egress services, the ClusterIP
Service health check endpoint is no longer returned by the shutting-down Pod
(by looking at the new Pod IP header).
- ensures that kubelet is configured to call the preshutdown endpoint
This reduces the possibility that, as replicas are terminated during an update,
a replica gets terminated to which cluster traffic is still being routed via
the ClusterIP Service because kube proxy has not yet updated routig rules.
This is not a perfect check as in practice, it only checks that the kube
proxy on the node on which the proxy runs has updated rules. However, overall
this might be good enough.
The preshutdown logic is disabled if users have configured a custom health check
port via TS_LOCAL_ADDR_PORT env var. This change throws a warnign if so and in
future setting of that env var for operator proxies might be disallowed (as users
shouldn't need to configure this for a Pod directly).
This is backwards compatible with earlier proxy versions.
Updates tailscale/tailscale#14326
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
cmd/containerboot,kube/kubetypes,cmd/k8s-operator: detect if Ingress is created in a tailnet that has no HTTPS
This attempts to make Kubernetes Operator L7 Ingress setup failures more explicit:
- the Ingress resource now only advertises HTTPS endpoint via status.ingress.loadBalancer.hostname when/if the proxy has succesfully loaded serve config
- the proxy attempts to catch cases where HTTPS is disabled for the tailnet and logs a warning
Updates tailscale/tailscale#12079
Updates tailscale/tailscale#10407
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/containerboot: serve health on local endpoint
We introduced stable (user) metrics in #14035, and `TS_LOCAL_ADDR_PORT`
with it. Rather than requiring users to specify a new addr/port
combination for each new local endpoint they want the container to
serve, this combines the health check endpoint onto the local addr/port
used by metrics if `TS_ENABLE_HEALTH_CHECK` is used instead of
`TS_HEALTHCHECK_ADDR_PORT`.
`TS_LOCAL_ADDR_PORT` now defaults to binding to all interfaces on 9002
so that it works more seamlessly and with less configuration in
environments other than Kubernetes, where the operator always overrides
the default anyway. In particular, listening on localhost would not be
accessible from outside the container, and many scripted container
environments do not know the IP address of the container before it's
started. Listening on all interfaces allows users to just set one env
var (`TS_ENABLE_METRICS` or `TS_ENABLE_HEALTH_CHECK`) to get a fully
functioning local endpoint they can query from outside the container.
Updates #14035, #12898
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
containerboot:
Adds 3 new environment variables for containerboot, `TS_LOCAL_ADDR_PORT` (default
`"${POD_IP}:9002"`), `TS_METRICS_ENABLED` (default `false`), and `TS_DEBUG_ADDR_PORT`
(default `""`), to configure metrics and debug endpoints. In a follow-up PR, the
health check endpoint will be updated to use the `TS_LOCAL_ADDR_PORT` if
`TS_HEALTHCHECK_ADDR_PORT` hasn't been set.
Users previously only had access to internal debug metrics (which are unstable
and not recommended) via passing the `--debug` flag to tailscaled, but can now
set `TS_METRICS_ENABLED=true` to expose the stable metrics documented at
https://tailscale.com/kb/1482/client-metrics at `/metrics` on the addr/port
specified by `TS_LOCAL_ADDR_PORT`.
Users can also now configure a debug endpoint more directly via the
`TS_DEBUG_ADDR_PORT` environment variable. This is not recommended for production
use, but exposes an internal set of debug metrics and pprof endpoints.
operator:
The `ProxyClass` CRD's `.spec.metrics.enable` field now enables serving the
stable user metrics documented at https://tailscale.com/kb/1482/client-metrics
at `/metrics` on the same "metrics" container port that debug metrics were
previously served on. To smooth the transition for anyone relying on the way the
operator previously consumed this field, we also _temporarily_ serve tailscaled's
internal debug metrics on the same `/debug/metrics` path as before, until 1.82.0
when debug metrics will be turned off by default even if `.spec.metrics.enable`
is set. At that point, anyone who wishes to continue using the internal debug
metrics (not recommended) will need to set the new `ProxyClass` field
`.spec.statefulSet.pod.tailscaleContainer.debug.enable`.
Users who wish to opt out of the transitional behaviour, where enabling
`.spec.metrics.enable` also enables debug metrics, can set
`.spec.statefulSet.pod.tailscaleContainer.debug.enable` to false (recommended).
Separately but related, the operator will no longer specify a host port for the
"metrics" container port definition. This caused scheduling conflicts when k8s
needs to schedule more than one proxy per node, and was not necessary for allowing
the pod's port to be exposed to prometheus scrapers.
Updates #11292
---------
Co-authored-by: Kristoffer Dalby <kristoffer@tailscale.com>
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Currently egress Services for ProxyGroup only work for Pods and Services
with IPv4 addresses. Ensure that it works on dual stack clusters by reading
proxy Pod's IP from the .status.podIPs list that always contains both
IPv4 and IPv6 address (if the Pod has them) rather than .status.podIP that
could contain IPv6 only for a dual stack cluster.
Updates tailscale/tailscale#13406
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Rearrange conditionals to reduce indentation and make it a bit easier to read
the logic. Also makes some error message updates for better consistency
with the recent decision around capitalising resource names and the
upcoming addition of config secrets.
Updates #cleanup
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
* cmd/containerboot,kube,util/linuxfw: configure kube egress proxies to route to 1+ tailnet targets
This commit is first part of the work to allow running multiple
replicas of the Kubernetes operator egress proxies per tailnet service +
to allow exposing multiple tailnet services via each proxy replica.
This expands the existing iptables/nftables-based proxy configuration
mechanism.
A proxy can now be configured to route to one or more tailnet targets
via a (mounted) config file that, for each tailnet target, specifies:
- the target's tailnet IP or FQDN
- mappings of container ports to which cluster workloads will send traffic to
tailnet target ports where the traffic should be forwarded.
Example configfile contents:
{
"some-svc": {"tailnetTarget":{"fqdn":"foo.tailnetxyz.ts.net","ports"{"tcp:4006:80":{"protocol":"tcp","matchPort":4006,"targetPort":80},"tcp:4007:443":{"protocol":"tcp","matchPort":4007,"targetPort":443}}}}
}
A proxy that is configured with this config file will configure firewall rules
to route cluster traffic to the tailnet targets. It will then watch the config file
for updates as well as monitor relevant netmap updates and reconfigure firewall
as needed.
This adds a bunch of new iptables/nftables functionality to make it easier to dynamically update
the firewall rules without needing to restart the proxy Pod as well as to make
it easier to debug/understand the rules:
- for iptables, each portmapping is a DNAT rule with a comment pointing
at the 'service',i.e:
-A PREROUTING ! -i tailscale0 -p tcp -m tcp --dport 4006 -m comment --comment "some-svc:tcp:4006 -> tcp:80" -j DNAT --to-destination 100.64.1.18:80
Additionally there is a SNAT rule for each tailnet target, to mask the source address.
- for nftables, a separate prerouting chain is created for each tailnet target
and all the portmapping rules are placed in that chain. This makes it easier
to look up rules and delete services when no longer needed.
(nftables allows hooking a custom chain to a prerouting hook, so no extra work
is needed to ensure that the rules in the service chains are evaluated).
The next steps will be to get the Kubernetes Operator to generate
the configfile and ensure it is mounted to the relevant proxy nodes.
Updates tailscale/tailscale#13406
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
containerboot's main.go had grown to well over 1000 lines with
lots of disparate bits of functionality. This commit is pure copy-
paste to group related functionality outside of the main function
into its own set of files. Everything is still in the main package
to keep the diff incremental and reviewable.
Updates #cleanup
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Tom Meadows
David Bond
Will Norris
Mario Minardi
Raj Singh
Irbe Krumina
Tom Proctor