After we intercept a DNS response and assign magic and transit addresses
we must communicate the assignment to our connector so that it can
direct traffic when it arrives.
Use the recently added peerapi endpoint to send the addresses.
Updates tailscale/corp#34258
Signed-off-by: Fran Bull <fran@tailscale.com>
This change reintroduces UserProfile.Groups, a slice that contains
the ACL-defined and synced groups that a user is a member of.
The slice will only be non-nil for clients with the node attribute
see-groups, and will only contain groups that the client is allowed
to see as per the app payload of the see-groups node attribute.
For example:
```
"nodeAttrs": [
{
"target": ["tag:dev"],
"app": {
"tailscale.com/see-groups": [{"groups": ["group:dev"]}]
}
},
[...]
]
```
UserProfile.Groups will also be gated by a feature flag for the time
being.
Updates tailscale/corp#31529
Signed-off-by: Gesa Stupperich <gesa@tailscale.com>
I omitted a lot of the min/max modernizers because they didn't
result in more clear code.
Some of it's older "for x := range 123".
Also: errors.AsType, any, fmt.Appendf, etc.
Updates #18682
Change-Id: I83a451577f33877f962766a5b65ce86f7696471c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This is a minimal hacky fix for a case where the portlist poller extension
could miss updates to NetMap's CollectServices bool.
Updates tailscale/corp#36813
Change-Id: I9b50de8ba8b09e4a44f9fbfe90c9df4d8ab4d586
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We should only add one entry to our magic ips for each domain+dst and
look up any existing entry instead of always creating a new one.
Fixestailscale/corp#34252
Signed-off-by: Fran Bull <fran@tailscale.com>
The new version of app connector (conn25) needs to read DNS responses
for domains it is interested in and store and swap out IP addresses.
Add a hook to dns manager to enable this.
Give the conn25 updated netmaps so that it knows when to assign
connecting addresses and from what pool.
Assign an address when we see a DNS response for a domain we are
interested in, but don't do anything with the address yet.
Updates tailscale/corp#34252
Signed-off-by: Fran Bull <fran@tailscale.com>
Add new "webbrowser" and "colorable" feature tags so that the
github.com/toqueteos/webbrowser and mattn/go-colorable packages
can be excluded from minbox builds.
Updates #12614
Change-Id: Iabd38b242f5a56aa10ef2050113785283f4e1fe8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Package feature/conn25 is excludeable from a build via the featuretag.
Test it is excluded for minimal builds.
Updates #12614
Signed-off-by: Fran Bull <fran@tailscale.com>
This allows fetching auth keys, OAuth client secrets, and ID tokens (for
workload identity federation) from AWS Parameter Store by passing an ARN
as the value. This is a relatively low-overhead mechanism for fetching
these values from an external secret store without needing to run a
secret service.
Usage examples:
# Auth key
tailscale up \
--auth-key=arn:aws:ssm:us-east-1:123456789012:parameter/tailscale/auth-key
# OAuth client secret
tailscale up \
--client-secret=arn:aws:ssm:us-east-1:123456789012:parameter/tailscale/oauth-secret \
--advertise-tags=tag:server
# ID token (for workload identity federation)
tailscale up \
--client-id=my-client \
--id-token=arn:aws:ssm:us-east-1:123456789012:parameter/tailscale/id-token \
--advertise-tags=tag:server
Updates tailscale/corp#28792
Signed-off-by: Andrew Dunham <andrew@tailscale.com>
This file was never truly necessary and has never actually been used in
the history of Tailscale's open source releases.
A Brief History of AUTHORS files
---
The AUTHORS file was a pattern developed at Google, originally for
Chromium, then adopted by Go and a bunch of other projects. The problem
was that Chromium originally had a copyright line only recognizing
Google as the copyright holder. Because Google (and most open source
projects) do not require copyright assignemnt for contributions, each
contributor maintains their copyright. Some large corporate contributors
then tried to add their own name to the copyright line in the LICENSE
file or in file headers. This quickly becomes unwieldy, and puts a
tremendous burden on anyone building on top of Chromium, since the
license requires that they keep all copyright lines intact.
The compromise was to create an AUTHORS file that would list all of the
copyright holders. The LICENSE file and source file headers would then
include that list by reference, listing the copyright holder as "The
Chromium Authors".
This also become cumbersome to simply keep the file up to date with a
high rate of new contributors. Plus it's not always obvious who the
copyright holder is. Sometimes it is the individual making the
contribution, but many times it may be their employer. There is no way
for the proejct maintainer to know.
Eventually, Google changed their policy to no longer recommend trying to
keep the AUTHORS file up to date proactively, and instead to only add to
it when requested: https://opensource.google/docs/releasing/authors.
They are also clear that:
> Adding contributors to the AUTHORS file is entirely within the
> project's discretion and has no implications for copyright ownership.
It was primarily added to appease a small number of large contributors
that insisted that they be recognized as copyright holders (which was
entirely their right to do). But it's not truly necessary, and not even
the most accurate way of identifying contributors and/or copyright
holders.
In practice, we've never added anyone to our AUTHORS file. It only lists
Tailscale, so it's not really serving any purpose. It also causes
confusion because Tailscalars put the "Tailscale Inc & AUTHORS" header
in other open source repos which don't actually have an AUTHORS file, so
it's ambiguous what that means.
Instead, we just acknowledge that the contributors to Tailscale (whoever
they are) are copyright holders for their individual contributions. We
also have the benefit of using the DCO (developercertificate.org) which
provides some additional certification of their right to make the
contribution.
The source file changes were purely mechanical with:
git ls-files | xargs sed -i -e 's/\(Tailscale Inc &\) AUTHORS/\1 contributors/g'
Updates #cleanup
Change-Id: Ia101a4a3005adb9118051b3416f5a64a4a45987d
Signed-off-by: Will Norris <will@tailscale.com>
Adds the ability to detect what provider the client is running on and tries fetch the ID token to use with Workload Identity.
Updates https://github.com/tailscale/corp/issues/33316
Signed-off-by: Danni Popova <danni@tailscale.com>
Add support for authenticating the gitops-pusher using workload identity
federation.
Updates https://github.com/tailscale/corp/issues/34172
Signed-off-by: Mario Minardi <mario@tailscale.com>
QR codes are used by `tailscale up --qr` to provide an easy way to
open a web-page without transcribing a difficult URI. However, there’s
no need for this feature if the client will never be called
interactively. So this PR adds the `ts_omit_qrcodes` build tag.
Updates #18182
Signed-off-by: Simon Law <sfllaw@tailscale.com>
Adding both user and client metrics for peer relay forwarded bytes and
packets, and the total endpoints gauge.
User metrics:
tailscaled_peer_relay_forwarded_packets_total{transport_in, transport_out}
tailscaled_peer_relay_forwarded_bytes_total{transport_in, transport_out}
tailscaled_peer_relay_endpoints_total{}
Where the transport labels can be of "udp4" or "udp6".
Client metrics:
udprelay_forwarded_(packets|bytes)_udp(4|6)_udp(4|6)
udprelay_endpoints
RELNOTE: Expose tailscaled metrics for peer relay.
Updates tailscale/corp#30820
Change-Id: I1a905d15bdc5ee84e28017e0b93210e2d9660259
Signed-off-by: Alex Valiushko <alexvaliushko@tailscale.com>
When peers request an IP address mapping to be stored, the connector
stores it in memory.
Fixestailscale/corp#34251
Signed-off-by: Fran Bull <fran@tailscale.com>
In preparation for exposing its configuration via ipn.ConfigVAlpha,
change {Masked}Prefs.RelayServerPort from *int to *uint16. This takes a
defensive stance against invalid inputs at JSON decode time.
'tailscale set --relay-server-port' is currently the only input to this
pref, and has always sanitized input to fit within a uint16.
Updates tailscale/corp#34591
Signed-off-by: Jordan Whited <jordan@tailscale.com>
And fix up the TestAutoUpdateDefaults integration tests as they
weren't testing reality: the DefaultAutoUpdate is supposed to only be
relevant on the first MapResponse in the stream, but the tests weren't
testing that. They were instead injecting a 2nd+ MapResponse.
This changes the test control server to add a hook to modify the first
map response, and then makes the test control when the node goes up
and down to make new map responses.
Also, the test now runs on macOS where the auto-update feature being
disabled would've previously t.Skipped the whole test.
Updates #11502
Change-Id: If2319bd1f71e108b57d79fe500b2acedbc76e1a6
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
(trying to get in smaller obvious chunks ahead of later PRs to make
them smaller)
Updates #17925
Change-Id: I184002001055790484e4792af8ffe2a9a2465b2e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
6a73c0bdf5 added a feature tag but didn't re-run go generate on ./feature/buildfeatures.
Updates #9192
Change-Id: I7819450453e6b34c60cad29d2273e3e118291643
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
DA protection is not super helpful because we don't set an authorization
password on the key. But if authorization fails for other reasons (like
TPM being reset), we will eventually cause DA lockout with tailscaled
trying to load the key. DA lockout then leads to (1) issues for other
processes using the TPM and (2) the underlying authorization error being
masked in logs.
Updates #17654
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
The key.NewEmptyHardwareAttestationKey hook returns a non-nil empty
attestationKey, which means that the nil check in Clone doesn't trigger
and proceeds to try and clone an empty key. Check IsZero instead to
reduce log spam from Clone.
As a drive-by, make tpmAvailable check a sync.Once because the result
won't change.
Updates #17882
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This commit replaces usage of local.Client in net/udprelay with DERPMap
plumbing over the eventbus. This has been a longstanding TODO. This work
was also accelerated by a memory leak in net/http when using
local.Client over long periods of time. So, this commit also addresses
said leak.
Updates #17801
Signed-off-by: Jordan Whited <jordan@tailscale.com>
When systemd notification support was omitted from the build, or on
non-Linux systems, we were unnecessarily emitting code and generating
garbage stringifying addresses upon transition to the Running state.
Updates #12614
Change-Id: If713f47351c7922bb70e9da85bf92725b25954b9
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In particular on Windows, the `transport.TPMCloser` we get is not safe
for concurrent use. This is especially noticeable because
`tpm.attestationKey.Clone` uses the same open handle as the original
key. So wrap the operations on ak.tpm with a mutex and make a deep copy
with a new connection in Clone.
Updates #15830
Updates #17662
Updates #17644
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
On some platforms e.g. ChromeOS the owner hierarchy might not always be
available to us. To avoid stale sealing exceptions later we probe to
confirm it's working rather than rely solely on family indicator status.
Updates #17622
Signed-off-by: Patrick O'Doherty <patrick@tailscale.com>
Check that the TPM we have opened is advertised as a 2.0 family device
before using it for state sealing / hardware attestation.
Updates #17622
Signed-off-by: Patrick O'Doherty <patrick@tailscale.com>
Add new arguments to `tailscale up` so authkeys can be generated dynamically via identity federation.
Updates #9192
Signed-off-by: mcoulombe <max@tailscale.com>
Merge the connstats package into the netlog package
and unexport all of its declarations.
Remove the buildfeatures.HasConnStats and use HasNetLog instead.
Updates tailscale/corp#33352
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
I was debugging a customer issue and saw in their 1.88.3 logs:
TPM: error opening: stat /dev/tpm0: no such file or directory
That's unnecessary output. The lack of TPM will be reported by
them having a nil Hostinfo.TPM, which is plenty elsewhere in logs.
Let's only write out an "error opening" line if it's an interesting
error. (perhaps permissions, or EIO, etc)
Updates #cleanup
Change-Id: I3f987f6bf1d3ada03473ca3eef555e9cfafc7677
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Extend Persist with AttestationKey to record a hardware-backed
attestation key for the node's identity.
Add a flag to tailscaled to allow users to control the use of
hardware-backed keys to bind node identity to individual machines.
Updates tailscale/corp#31269
Change-Id: Idcf40d730a448d85f07f1bebf387f086d4c58be3
Signed-off-by: Patrick O'Doherty <patrick@tailscale.com>
The lazy init led to confusion and a belief that was something was
wrong. It's reasonable to expect the daemon to listen on the port at the
time it's configured.
Updates tailscale/corp#33094
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Part of making all netlink monitoring code optional.
Updates #17311 (how I got started down this path)
Updates #12614
Change-Id: Ic80d8a7a44dc261c4b8678b3c2241c3b3778370d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Saves ~53 KB from the min build.
Updates #12614
Change-Id: I73f9544a9feea06027c6ebdd222d712ada851299
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Saves ~102 KB from the min build.
Updates #12614
Change-Id: Ie1d4f439321267b9f98046593cb289ee3c4d6249
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Due to iOS memory limitations in 2020 (see
https://tailscale.com/blog/go-linker, etc) and wireguard-go using
multiple goroutines per peer, commit 16a9cfe2f4 introduced some
convoluted pathsways through Tailscale to look at packets before
they're delivered to wireguard-go and lazily reconfigure wireguard on
the fly before delivering a packet, only telling wireguard about peers
that are active.
We eventually want to remove that code and integrate wireguard-go's
configuration with Tailscale's existing netmap tracking.
To make it easier to find that code later, this makes it modular. It
saves 12 KB (of disk) to turn it off (at the expense of lots of RAM),
but that's not really the point. The point is rather making it obvious
(via the new constants) where this code even is.
Updates #12614
Change-Id: I113b040f3e35f7d861c457eaa710d35f47cee1cb
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Saves only 12 KB, but notably removes some deps on packages that future
changes can then eliminate entirely.
Updates #12614
Change-Id: Ibf830d3ee08f621d0a2011b1d4cd175427ef50df
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Fran Bull
Gesa Stupperich
Brad Fitzpatrick
Andrew Dunham
Will Norris
Danni Popova
Mario Minardi
Simon Law
Alex Valiushko
Anton Tolchanov
Andrew Lytvynov
Jordan Whited
Alex Chan
Max Coulombe
Patrick O'Doherty
Joe Tsai