Config.singleResolverSet returns true if all routes have the same resolvers,
even if the routes have no resolvers. If none of the routes have a specific
resolver, the default should be used instead. Therefore, check for more than
0 instead of nil.
Signed-off-by: Ryan Petris <ryan@petris.net>
An EmbeddedAppConnector is added that when configured observes DNS
responses from the PeerAPI. If a response is found matching a configured
domain, routes are advertised when necessary.
The wiring from a configuration in the netmap capmap is not yet done, so
while the connector can be enabled, no domains can yet be added.
Updates tailscale/corp#15437
Signed-off-by: James Tucker <james@tailscale.com>
As of 2023-11-27, the official IP addresses for b.root-servers.net will
change to a new set, with the older IP addresses supported for at least
a year after that date. These IPs are already active and returning
results, so update these in our recursive DNS resolver package so as to
be ready for the switchover.
See: https://b.root-servers.org/news/2023/05/16/new-addresses.htmlFixes#9994
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I29e2fe9f019163c9ec0e62bdb286e124aa90a487
Endeavour OS, at least, uses NetworkManager 1.44.2 and does
not use systemd-resolved behind the scenes at all. If we
find ourselves in that situation, return "direct" not
"systemd-resolved"
Fixes https://github.com/tailscale/tailscale/issues/9687
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
Tailscale attempts to determine if resolvconf or openresolv
is in use by running `resolvconf --version`, under the assumption
this command will error when run with Debian's resolvconf. This
assumption is no longer true and leads to the wrong commands being
run on newer versions of Debian with resolvconf >= 1.90. We can
now check if the returned version string starts with "Debian resolvconf"
if the command is successful.
Fixes#9218
Signed-off-by: Galen Guyer <galen@galenguyer.com>
Advertise it on Android (it looks like it already works once advertised).
And both advertise & likely fix it on iOS. Yet untested.
Updates #9672
Change-Id: If3b7e97f011dea61e7e75aff23dcc178b6cf9123
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Instead of just falling back to making a TCP query to an upstream DNS
server when the UDP query returns a truncated query, also start a TCP
query in parallel with the UDP query after a given race timeout. This
ensures that if the upstream DNS server does not reply over UDP (or if
the response packet is blocked, or there's an error), we can still make
queries if the server replies to TCP queries.
This also adds a new package, util/race, to contain the logic required for
racing two different functions and returning the first non-error answer.
Updates tailscale/corp#14809
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I4311702016c1093b1beaa31b135da1def6d86316
We weren't correctly retrying truncated requests to an upstream DNS
server with TCP. Instead, we'd return a truncated request to the user,
even if the user was querying us over TCP and thus able to handle a
large response.
Also, add an envknob and controlknob to allow users/us to disable this
behaviour if it turns out to be buggy (✨ DNS ✨).
Updates #9264
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ifb04b563839a9614c0ba03e9c564e8924c1a2bfd
One Quad9 IPv6 address was incorrect, and an additional group needed
adding. Additionally I checked Cloudflare and included source reference
URLs for both.
Updates #cleanup
Signed-off-by: James Tucker <james@tailscale.com>
The following IPs are not used anymore: 193.19.108.2 and 193.19.108.3.
All of the servers are now named consistently under dns.mullvad.net.
Several new servers were added.
https://mullvad.net/en/help/dns-over-https-and-dns-over-tls/
Updates #5416
Updates #9345
Signed-off-by: James Tucker <james@tailscale.com>
I didn't clean up the more idiomatic map[T]bool with true values, at
least yet. I just converted the relatively awkward struct{}-valued
maps.
Updates #cleanup
Change-Id: I758abebd2bb1f64bc7a9d0f25c32298f4679c14f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
RELNOTE=Adds support for Wikimedia DNS
Updates #9255
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I4213c29e0f91ea5aa0304a5a026c32b6690fead9
This removes a lot of API from net/interfaces (including all the
filter types, EqualFiltered, active Tailscale interface func, etc) and
moves the "major" change detection to net/netmon which knows more
about the world and the previous/new states.
Updates #9040
Change-Id: I7fe66a23039c6347ae5458745b709e7ebdcce245
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Having `127.0.0.53` is not the only way to use `systemd-resolved`. An
alternative way is to enable `libnss_resolve` module, which seems to now
be used by default on Debian 12 bookworm.
Fixes#8549
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
This change introduces tstime.NewClock and tstime.ClockOpts as a new way
to construct tstime.Clock. This is a subset of #8464 as a stepping stone
so that we can update our internal code to use the new API before making
the second round of changes.
Updates #8463
Change-Id: Ib26edb60e5355802aeca83ed60e4fdf806c90e27
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
We've talked in the past about reworking how bootstrap DNS works to
instead do recursive DNS resolution from the root; this would better
support on-prem customers and Headscale users where the DERP servers
don't currently resolve their DNS server. This package is an initial
implementation of recursive resolution for A and AAAA records.
Updates #5853
Change-Id: Ibe974d78709b4b03674b47c4ef61f9a00addf8b4
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
On some platforms (notably macOS and iOS) we look up the default
interface to bind outgoing connections to. This is both duplicated
work and results in logspam when the default interface is not available
(i.e. when a phone has no connectivity, we log an error and thus cause
more things that we will try to upload and fail).
Fixed by passing around a netmon.Monitor to more places, so that we can
use its cached interface state.
Fixes#7850
Updates #7621
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
We're using it in more and more places, and it's not really specific to
our use of Wireguard (and does more just link/interface monitoring).
Also removes the separate interface we had for it in sockstats -- it's
a small enough package (we already pull in all of its dependencies
via other paths) that it's not worth the extra complexity.
Updates #7621
Updates #7850
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
This is a follow-up to #7905 that adds two more linters and fixes the corresponding findings. As per the previous PR, this only flags things that are "obviously" wrong, and fixes the issues found.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I8739bdb7bc4f75666a7385a7a26d56ec13741b7c
This adds an initial and intentionally minimal configuration for
golang-ci, fixes the issues reported, and adds a GitHub Action to check
new pull requests against this linter configuration.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I8f38fbc315836a19a094d0d3e986758b9313f163
So we're staying within the netip.Addr/AddrPort consistently and
avoiding allocs/conversions to the legacy net addr types.
Updates #5162
Change-Id: I59feba60d3de39f773e68292d759766bac98c917
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Using log.Printf may end up being printed out to the console, which
is not desirable. I noticed this when I was investigating some client
logs with `sockstats: trace "NetcheckClient" was overwritten by another`.
That turns to be harmless/expected (the netcheck client will fall back
to the DERP client in some cases, which does its own sockstats trace).
However, the log output could be visible to users if running the
`tailscale netcheck` CLI command, which would be needlessly confusing.
Updates tailscale/corp#9230
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Makes it cheaper/simpler to persist values, and encourages reuse of
labels as opposed to generating an arbitrary number.
Updates tailscale/corp#9230
Updates #3363
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Despite the fact that WSL configuration is still disabled by default, we
continue to log the machine's list of WSL distros as a diagnostic measure.
Unfortunately I have seen the "wsl.exe -l" command hang indefinitely. This patch
adds a (more than reasonable) 10s timeout to ensure that tailscaled does not get
stuck while executing this operation.
I also modified the Windows implementation of NewOSConfigurator to do the
logging asynchronously, since that information is not required in order to
continue starting up.
Fixes#7476
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
Uses the hooks added by tailscale/go#45 to instrument the reads and
writes on the major code paths that do network I/O in the client. The
convention is to use "<package>.<type>:<label>" as the annotation for
the responsible code path.
Enabled on iOS, macOS and Android only, since mobile platforms are the
ones we're most interested in, and we are less sensitive to any
throughput degradation due to the per-I/O callback overhead (macOS is
also enabled for ease of testing during development).
For now just exposed as counters on a /v0/sockstats PeerAPI endpoint.
We also keep track of the current interface so that we can break out
the stats by interface.
Updates tailscale/corp#9230
Updates #3363
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
It was originally added to control memory use on iOS (#2490), but then
was relaxed conditionally when running on iOS 15 (#3098). Now that we
require iOS 15, there's no need for the limit at all, so simplify back
to the original state.
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Add the envknob TS_DEBUG_EXIT_NODE_DNS_NET_PKG, which enables more
verbose debug logging when calling the handleExitNodeDNSQueryWithNetPkg
function. This function is currently only called on Windows and Android.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ieb3ca7b98837d7dc69cd9ca47609c1c52e3afd7b
This updates all source files to use a new standard header for copyright
and license declaration. Notably, copyright no longer includes a date,
and we now use the standard SPDX-License-Identifier header.
This commit was done almost entirely mechanically with perl, and then
some minimal manual fixes.
Updates #6865
Signed-off-by: Will Norris <will@tailscale.com>
I typoed/brainoed in the earlier 3582628691
Change-Id: Ic198a6f9911f195d9da9fc5259b5784a4b15e5e3
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
With a42a594bb3, iOS uses netstack and
hence there are no longer any platforms which use the legacy MagicDNS path. As such, we remove it.
We also normalize the limit for max in-flight DNS queries on iOS (it was 64, now its 256 as per other platforms).
It was 64 for the sake of being cautious about memory, but now we have 50Mb (iOS-15 and greater) instead of 15Mb
so we have the spare headroom.
Signed-off-by: Tom DNetto <tom@tailscale.com>
We saw a few cases where we hit this limit; bumping to 4k seems
relatively uncontroversial.
Change-Id: I218fee3bc0d2fa5fde16eddc36497a73ebd7cbda
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Previously, if a DNS-over-TCP message was received while there were
existing queries in-flight, and it was over the size limit, we'd close
the 'responses' channel. This would cause those in-flight queries to
send on the closed channel and panic.
Instead, don't close the channel at all and rely on s.ctx being
canceled, which will ensure that in-flight queries don't hang.
Fixes#6725
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I8267728ac37ed7ae38ddd09ce2633a5824320097
Andrew Lytvynov
Aaron Klotz
Juergen Knaack
Ryan Petris
James Tucker
Andrew Dunham
Denton Gentry
Galen Guyer
Brad Fitzpatrick
Andrew Dunham
David Anderson
Michael Stapelberg
Anton Tolchanov
Adrian Dewhurst
Mihai Parparita
Maisem Ali
Will Norris
Tom DNetto