The go-httpstat package has a data race when used with connections that
are performing happy-eyeballs connection setups as we are in the DERP
client. There is a long-stale PR upstream to address this, however
revisiting the purpose of this code suggests we don't really need
httpstat here.
The code populates a latency table that may be used to compare to STUN
latency, which is a lightweight RTT check. Switching out the reported
timing here to simply the request HTTP request RTT avoids the
problematic package.
Fixestailscale/corp#25095
Signed-off-by: James Tucker <james@tailscale.com>
This is the start of an integration/e2e test suite for the tailscale operator.
It currently only tests two major features, ingress proxy and API server proxy,
but we intend to expand it to cover more features over time. It also only
supports manual runs for now. We intend to integrate it into CI checks in a
separate update when we have planned how to securely provide CI with the secrets
required for connecting to a test tailnet.
Updates #12622
Change-Id: I31e464bb49719348b62a563790f2bc2ba165a11b
Co-authored-by: Irbe Krumina <irbe@tailscale.com>
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Every so often, the ProxyGroup and other controllers lose an optimistic locking race
with other controllers that update the objects they create. Stop treating
this as an error event, and instead just log an info level log line for it.
Fixes#14072
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
cmd/containerboot,kube/kubetypes,cmd/k8s-operator: detect if Ingress is created in a tailnet that has no HTTPS
This attempts to make Kubernetes Operator L7 Ingress setup failures more explicit:
- the Ingress resource now only advertises HTTPS endpoint via status.ingress.loadBalancer.hostname when/if the proxy has succesfully loaded serve config
- the proxy attempts to catch cases where HTTPS is disabled for the tailnet and logs a warning
Updates tailscale/tailscale#12079
Updates tailscale/tailscale#10407
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
cmd/k8s-operator/deploy/chart: allow reading OAuth creds from a CSI driver's volume and annotating operator's Service account
Updates #14264
Signed-off-by: Oliver Rahner <o.rahner@dke-data.com>
When the operator enables metrics on a proxy, it uses the port 9001,
and in the near future it will start using 9002 for the debug endpoint
as well. Make sure we don't choose ports from a range that includes
9001 so that we never clash. Setting TS_SOCKS5_SERVER, TS_HEALTHCHECK_ADDR_PORT,
TS_OUTBOUND_HTTP_PROXY_LISTEN, and PORT could also open arbitrary ports,
so we will need to document that users should not choose ports from the
10000-11000 range for those settings.
Updates #13406
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
* cmd/k8s-operator,k8s-operator,go.mod: optionally create ServiceMonitor
Adds a new spec.metrics.serviceMonitor field to ProxyClass.
If that's set to true (and metrics are enabled), the operator
will create a Prometheus ServiceMonitor for each proxy to which
the ProxyClass applies.
Additionally, create a metrics Service for each proxy that has
metrics enabled.
Updates tailscale/tailscale#11292
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
We were previously relying on unintended behaviour by runc where
all containers where by default given read/write/mknod permissions
for tun devices.
This behaviour was removed in https://github.com/opencontainers/runc/pull/3468
and released in runc 1.2.
Containerd container runtime, used by Docker and majority of Kubernetes distributions
bumped runc to 1.2 in 1.7.24 https://github.com/containerd/containerd/releases/tag/v1.7.24
thus breaking our reference tun mode Tailscale Kubernetes manifests and Kubernetes
operator proxies.
This PR changes the all Kubernetes container configs that run Tailscale in tun mode
to privileged. This should not be a breaking change because all these containers would
run in a Pod that already has a privileged init container.
Updates tailscale/tailscale#14256
Updates tailscale/tailscale#10814
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/containerboot: serve health on local endpoint
We introduced stable (user) metrics in #14035, and `TS_LOCAL_ADDR_PORT`
with it. Rather than requiring users to specify a new addr/port
combination for each new local endpoint they want the container to
serve, this combines the health check endpoint onto the local addr/port
used by metrics if `TS_ENABLE_HEALTH_CHECK` is used instead of
`TS_HEALTHCHECK_ADDR_PORT`.
`TS_LOCAL_ADDR_PORT` now defaults to binding to all interfaces on 9002
so that it works more seamlessly and with less configuration in
environments other than Kubernetes, where the operator always overrides
the default anyway. In particular, listening on localhost would not be
accessible from outside the container, and many scripted container
environments do not know the IP address of the container before it's
started. Listening on all interfaces allows users to just set one env
var (`TS_ENABLE_METRICS` or `TS_ENABLE_HEALTH_CHECK`) to get a fully
functioning local endpoint they can query from outside the container.
Updates #14035, #12898
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Ensure that the ExternalName Service port names are always synced to the
ClusterIP Service, to fix a bug where if users created a Service with
a single unnamed port and later changed to 1+ named ports, the operator
attempted to apply an invalid multi-port Service with an unnamed port.
Also, fixes a small internal issue where not-yet Service status conditons
were lost on a spec update.
Updates tailscale/tailscale#10102
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
containerboot:
Adds 3 new environment variables for containerboot, `TS_LOCAL_ADDR_PORT` (default
`"${POD_IP}:9002"`), `TS_METRICS_ENABLED` (default `false`), and `TS_DEBUG_ADDR_PORT`
(default `""`), to configure metrics and debug endpoints. In a follow-up PR, the
health check endpoint will be updated to use the `TS_LOCAL_ADDR_PORT` if
`TS_HEALTHCHECK_ADDR_PORT` hasn't been set.
Users previously only had access to internal debug metrics (which are unstable
and not recommended) via passing the `--debug` flag to tailscaled, but can now
set `TS_METRICS_ENABLED=true` to expose the stable metrics documented at
https://tailscale.com/kb/1482/client-metrics at `/metrics` on the addr/port
specified by `TS_LOCAL_ADDR_PORT`.
Users can also now configure a debug endpoint more directly via the
`TS_DEBUG_ADDR_PORT` environment variable. This is not recommended for production
use, but exposes an internal set of debug metrics and pprof endpoints.
operator:
The `ProxyClass` CRD's `.spec.metrics.enable` field now enables serving the
stable user metrics documented at https://tailscale.com/kb/1482/client-metrics
at `/metrics` on the same "metrics" container port that debug metrics were
previously served on. To smooth the transition for anyone relying on the way the
operator previously consumed this field, we also _temporarily_ serve tailscaled's
internal debug metrics on the same `/debug/metrics` path as before, until 1.82.0
when debug metrics will be turned off by default even if `.spec.metrics.enable`
is set. At that point, anyone who wishes to continue using the internal debug
metrics (not recommended) will need to set the new `ProxyClass` field
`.spec.statefulSet.pod.tailscaleContainer.debug.enable`.
Users who wish to opt out of the transitional behaviour, where enabling
`.spec.metrics.enable` also enables debug metrics, can set
`.spec.statefulSet.pod.tailscaleContainer.debug.enable` to false (recommended).
Separately but related, the operator will no longer specify a host port for the
"metrics" container port definition. This caused scheduling conflicts when k8s
needs to schedule more than one proxy per node, and was not necessary for allowing
the pod's port to be exposed to prometheus scrapers.
Updates #11292
---------
Co-authored-by: Kristoffer Dalby <kristoffer@tailscale.com>
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
A small follow-up to #14112- ensures that the operator itself can emit
Events for its kube state store changes.
Updates tailscale/tailscale#14080
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
This is a follow-up to #14112 where our internal kube client was updated
to allow it to emit Events - this updates our sample kube manifests
and tsrecorder manifest templates so they can benefit from this functionality.
Updates tailscale/tailscale#14080
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Adds functionality to kube client to emit Events.
Updates kube store to emit Events when tailscaled state has been loaded, updated or if any errors where
encountered during those operations.
This should help in cases where an error related to state loading/updating caused the Pod to crash in a loop-
unlike logs of the originally failed container instance, Events associated with the Pod will still be
accessible even after N restarts.
Updates tailscale/tailscale#14080
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
We currently annotate pods with a hash of the tailscaled config so that
we can trigger pod restarts whenever it changes. However, the hash
updates more frequently than is necessary causing more restarts than is
necessary. This commit removes two causes; scaling up/down and removing
the auth key after pods have initially authed to control. However, note
that pods will still restart on scale-up/down because of the updated set
of volumes mounted into each pod. Hopefully we can fix that in a planned
follow-up PR.
Updates #13406
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Or unless the new "ts_debug_websockets" build tag is set.
Updates #1278
Change-Id: Ic4c4f81c1924250efd025b055585faec37a5491d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Otherwise all the clients only using control/controlhttp for the
ts2021 HTTP client were also pulling in WebSocket libraries, as the
server side always needs to speak websockets, but only GOOS=js clients
speak it.
This doesn't yet totally remove the websocket dependency on Linux because
Linux has a envknob opt-in to act like GOOS=js for manual testing and force
the use of WebSockets for DERP only (not control). We can put that behind
a build tag in a future change to eliminate the dep on all GOOSes.
Updates #1278
Change-Id: I4f60508f4cad52bf8c8943c8851ecee506b7ebc9
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Sets a custom hostinfo app type for ProxyGroup replicas, similarly
to how we do it for all other Kubernetes Operator managed components.
Updates tailscale/tailscale#13406,tailscale/corp#22920
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
This adds a new generic result type (motivated by golang/go#70084) to
try it out, and uses it in the new lineutil package (replacing the old
lineread package), changing that package to return iterators:
sometimes over []byte (when the input is all in memory), but sometimes
iterators over results of []byte, if errors might happen at runtime.
Updates #12912
Updates golang/go#70084
Change-Id: Iacdc1070e661b5fb163907b1e8b07ac7d51d3f83
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In this PR, we add the tailscale syspolicy command with two subcommands: list, which displays
policy settings, and reload, which forces a reload of those settings. We also update the LocalAPI
and LocalClient to facilitate these additions.
Updates #12687
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Now when we have HA for egress proxies, it makes sense to support topology
spread constraints that would allow users to define more complex
topologies of how proxy Pods need to be deployed in relation with other
Pods/across regions etc.
Updates tailscale/tailscale#13406
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
In this PR, we update the syspolicy package to utilize syspolicy/rsop under the hood,
and remove syspolicy.CachingHandler, syspolicy.windowsHandler and related code
which is no longer used.
We mark the syspolicy.Handler interface and RegisterHandler/SetHandlerForTest functions
as deprecated, but keep them temporarily until they are no longer used in other repos.
We also update the package to register setting definitions for all existing policy settings
and to register the Registry-based, Windows-specific policy stores when running on Windows.
Finally, we update existing internal and external tests to use the new API and add a few more
tests and benchmarks.
Updates #12687
Signed-off-by: Nick Khyl <nickk@tailscale.com>
It had bit-rotted likely during the transition to vector io in
76389d8baf. Tested on Ubuntu 24.04
by creating a netns and doing the DHCP dance to get an IP.
Updates #2589
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Updates tailscale/tailscale#13839
Adds a new blockblame package which can detect common MITM SSL certificates used by network appliances. We use this in `tlsdial` to display a dedicated health warning when we cannot connect to control, and a network appliance MITM attack is detected.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
Adds logic to `checkExitNodePrefsLocked` to return an error when
attempting to use exit nodes on a platform where this is not supported.
This mirrors logic that was added to error out when trying to use `ssh`
on an unsupported platform, and has very similar semantics.
Fixes https://github.com/tailscale/tailscale/issues/13724
Signed-off-by: Mario Minardi <mario@tailscale.com>
This helps better distinguish what is generating activity to the
Tailscale public API.
Updates tailscale/corp#23838
Signed-off-by: Percy Wegmann <percy@tailscale.com>
cmd/k8s-operator,k8s-operator/apis: set a readiness condition on egress Services
Set a readiness condition on ExternalName Services that define a tailnet target
to route cluster traffic to via a ProxyGroup's proxies. The condition
is set to true if at least one proxy is currently set up to route.
Updates tailscale/tailscale#13406
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
We don't need to error out and continuously reconcile if ProxyClass
has not (yet) been created, once it gets created the ProxyGroup
reconciler will get triggered.
Updates tailscale/tailscale#13406
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Ensure that .status.podIPs is used to select Pod's IP
in all reconcilers.
Updates tailscale/tailscale#13406
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
As discussed in #13684, base the ProxyGroup's proxy definitions on the same
scaffolding as the existing proxies, as defined in proxy.yaml
Updates #13406
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Currently egress Services for ProxyGroup only work for Pods and Services
with IPv4 addresses. Ensure that it works on dual stack clusters by reading
proxy Pod's IP from the .status.podIPs list that always contains both
IPv4 and IPv6 address (if the Pod has them) rather than .status.podIP that
could contain IPv6 only for a dual stack cluster.
Updates tailscale/tailscale#13406
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
The default ProxyClass can be set via helm chart or env var, and applies
to all proxies that do not otherwise have an explicit ProxyClass set.
This ensures proxies created by the new ProxyGroup CRD are consistent
with the behaviour of existing proxies
Nearby but unrelated changes:
* Fix up double error logs (controller runtime logs returned errors)
* Fix a couple of variable names
Updates #13406
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Implements the controller for the new ProxyGroup CRD, designed for
running proxies in a high availability configuration. Each proxy gets
its own config and state Secret, and its own tailscale node ID.
We are currently mounting all of the config secrets into the container,
but will stop mounting them and instead read them directly from the kube
API once #13578 is implemented.
Updates #13406
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Adds a new reconciler that reconciles ExternalName Services that define a
tailnet target that should be exposed to cluster workloads on a ProxyGroup's
proxies.
The reconciler ensures that for each such service, the config mounted to
the proxies is updated with the tailnet target definition and that
and EndpointSlice and ClusterIP Service are created for the service.
Adds a new reconciler that ensures that as proxy Pods become ready to route
traffic to a tailnet target, the EndpointSlice for the target is updated
with the Pods' endpoints.
Updates tailscale/tailscale#13406
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
The operator creates a non-reusable auth key for each of
the cluster proxies that it creates and puts in the tailscaled
configfile mounted to the proxies.
The proxies are always tagged, and their state is persisted
in a Kubernetes Secret, so their node keys are expected to never
be regenerated, so that they don't need to re-auth.
Some tailnet configurations however have seen issues where the auth
keys being left in the tailscaled configfile cause the proxies
to end up in unauthorized state after a restart at a later point
in time.
Currently, we have not found a way to reproduce this issue,
however this commit removes the auth key from the config once
the proxy can be assumed to have logged in.
If an existing, logged-in proxy is upgraded to this version,
its redundant auth key will be removed from the conffile.
If an existing, logged-in proxy is downgraded from this version
to a previous version, it will work as before without re-issuing key
as the previous code did not enforce that a key must be present.
Updates tailscale/tailscale#13451
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
The ProxyGroup CRD specifies a set of N pods which will each be a
tailnet device, and will have M different ingress or egress services
mapped onto them. It is the mechanism for specifying how highly
available proxies need to be. This commit only adds the definition, no
controller loop, and so it is not currently functional.
This commit also splits out TailnetDevice and RecorderTailnetDevice
into separate structs because the URL field is specific to recorders,
but we want a more generic struct for use in the ProxyGroup status field.
Updates #13406
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
cmd/k8s-operator,k8s-operator,kube: Add TSRecorder CRD + controller
Deploys tsrecorder images to the operator's cluster. S3 storage is
configured via environment variables from a k8s Secret. Currently
only supports a single tsrecorder replica, but I've tried to take early
steps towards supporting multiple replicas by e.g. having a separate
secret for auth and state storage.
Example CR:
```yaml
apiVersion: tailscale.com/v1alpha1
kind: Recorder
metadata:
name: rec
spec:
enableUI: true
```
Updates #13298
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Tom Proctor
Irbe Krumina
James Tucker
Oliver Rahner
James Stocker
Brad Fitzpatrick
Nick Khyl
Nick Kirby
Maisem Ali
Andrea Gottardo
Mario Minardi
Percy Wegmann
Cameron Stokes