Point tsapp at the tailscale/breakglass fork, fetch SSH keys from EC2
IMDSv2, restrict to the sec-scan user and internal CIDRs, start on
boot, and stop after 120s idle.
Updates #1866
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
The tailscale/gokrazy-kernel module was a fork of rtr7/kernel that
stalled at Linux 6.8.9 (July 2024). All of the kernel config options we
had added in that fork (ENA, Xen for EC2, virtio-mmio for qemu microvm,
virtio RNG, IPv6 policy routing, netlink diag, etc) are now present in
the gokrazy project's own gokrazy/kernel.amd64 module, which tracks
current kernel.org releases (Linux 7.1.3 as of this change) and is the
gokrazy project's supported kernel for x86_64 PCs and VMs.
Switch the tsapp and natlabapp images, the natlab VM tests, and the
CI workflow to gokrazy/kernel.amd64, drop the tailscale/gokrazy-kernel
dependency, and update gokrazy/kernel.arm64 to latest while here.
Verified with TestEasyEasy, TestJustIPv6, and TestTailscaleSSH in
tstest/natlab/vmtest with --run-vm-tests.
Updates #1866
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I90c3765a4e18f5609b4d77b51ac38d17c8e3688a
One AMI now self-configures from user-data or, when absent, enrolls over
serial.
Updates #1866
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
This is a variant of "tailscale configure flash-appliance" but for running
on Proxmox PVE hosts to make a Proxmox VM running the experimental
Tailscale Appliance.
This also makes the "Esc" key make the fbstatus GUI open up a terminal,
instead of Control-Alt-F2 which is hard to type over NoVNC.
And make gafpush unidirectional, to not require a local port be opened locally,
which I hit while working on this.
And make fbstatus included in all appliance variants, but bail out early
and stop respawing if the machine has no framebuffer (e.g. AWS VMs).
Updates #1866
Change-Id: I18ec2a16e4d5ff5574e16fe55c0e8d06cf4fab7f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Several improvements to the gokrazy appliance build and flash workflow:
gokrazy/build.go:
- Round Pi image size up to a power of 2 (QEMU raspi3b requires it)
- Use monogok's mkfs.Perm for the /perm ext4 partition (pure Go,
cross-platform, no e2fsprogs dependency)
gokrazy/mkfs:
- Accept optional PermFile entries to include in the freshly-created
ext4 filesystem (used for breakglass authorized_keys)
- Use progresstracking.Ticker for flush progress reporting
gokrazy/tsapp*/config.json:
- Point breakglass at /perm/breakglass.authorized_keys (not ec2)
- Fix Pi SerialConsole to serial0,115200 (not ttyS0)
cmd/tailscale/cli/configure-flash-appliance.go:
- Add --add-ssh-authorized-keys flag to write an authorized_keys
file into /perm during flash (for breakglass SSH access)
- Use progresstracking.CountingWriter + Ticker for write progress
Makefile:
- tsapp-build-and-flash-pi: auto-include ~/.ssh/id_ed25519.pub
- tsapp-qemu-pi: use virt machine + UEFI + ramfb + e1000 (working
network + framebuffer), with DTB watchdog patch and
gokrazy.log_to_serial for debugging
- Auto-detect UEFI firmware path across Debian/Homebrew/Fedora
Updates #1866
Change-Id: Ifa97ad34c509a81e1637d9bce12a788037dfe5ec
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Builds on top of the unsigned URL-based GAF update flow added previously
(see referenced issue for context). The pkgs.tailscale.com server now
publishes signed GAFs for the unstable track, with detached ed25519
signatures produced by pkgsign's signdist path (the same distsign scheme
used for every other release artifact). This change consumes them.
The URL-based path (tailscale update --gokrazy-update-from-url=URL) now
verifies the signature by default using clientupdate/distsign.Client,
which fetches distsign.pub from the root of the host serving the GAF and
checks the .sig against the root keys embedded in this binary. The
--unsigned flag stays for TestGokrazyUpdatesItselfToSameImage, whose
in-test fileserver does not publish distsign.pub.
The bare tailscale update path is now wired up for the Tailscale
appliance image. It fetches <pkgs>/<track>/?mode=json, picks the GAF
whose key matches the local device (vm-amd64, vm-arm64, or pi-arm64,
where arm64 is split via /sys/firmware/devicetree/base/model), confirms
the version with the user, and reuses the verified download path above.
To avoid wiping a user's custom Gokrazy build that happens to include
tailscaled, the bare update path is gated on hostinfo.Package == "tsapp",
which is only set when the new ts_appliance build tag is present
(mirroring the existing ts_package_container tag). The
gokrazy/tsapp*/config.json files now pass GoBuildTags ["ts_appliance"]
for the tailscale and tailscaled packages so monogok bakes the tag into
the official appliance builds. The TS_FORCE_ALLOW_TSAPP_UPDATE env var
is an escape hatch for callers who want to force the appliance update
path on a non-appliance build. The URL-based path stays ungated since it
requires explicit user intent (and is exercised by the natlab vmtest).
Updates #20002
Change-Id: I7c7856a88bf3dffb9eb8d3e9111fad0b3906743c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
When we switched to monogok in 371d6369cd, we lost our gokrazy fork's
change to let the syslog be configured from the Linux cmdline.
That's sent upstream in gokrazy/gokrazy#275 but still in review. Meanwhile,
revert to a fork, while still keeping monogok. Monogok was updated to
support an alternate init package, which is now hosted temporarily at
https://github.com/tailscale/ts-gokrazy
This means we can rip out the log polling loop out of pending PR #19568
and go ack to using syslog.
Updates #13038
Change-Id: I36931ee8eecc40d6165ad036c6181dfb07b86ba2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
... rather than abusing the generic tsapp.
Per discussion in https://github.com/gokrazy/gokrazy/pull/275
It also means we can remove stuff we don't need, like ntp or randomd.
Updates #13038
Change-Id: Iccf579c354bd3b5025d05fa1128e32f1d5bde4e4
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The heartbeat package does nothing if not configured anyway, so don't
even put it in the image and pay the cost of it running.
Updates #13038
Updates #1866
Change-Id: Id22c0fb1f8395ad21ab0e0350973d31730e8d39f
Kristoffer DalbyandKristoffer Dalby
Brad FitzpatrickandBrad Fitzpatrick