Add a new "ipnbus" build feature tag so the watch-ipn-bus LocalAPI
endpoint can be independently controlled, rather than being gated
behind HasDebug || HasServe. Minimal/embedded builds that omit both
debug and serve were getting 404s on watch-ipn-bus, breaking
"tailscale up --authkey=..." and other CLI flows that depend on
WatchIPNBus.
In the CLI, check buildfeatures.HasIPNBus before attempting to watch
the IPN bus in "tailscale up"/"tailscale login", and exit early with
an informational message when the feature is omitted.
Also add the missing NewCounterFunc stub to clientmetric/omit.go,
which caused compilation errors when building with
ts_omit_clientmetrics and netstack enabled.
Fixes#19240
Change-Id: I2e3c69a72fc50fa02542b91b8a54859618a463d1
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This is a follow-up to #19117, adding a debug CLI command allowing the operator
to explicitly discard cached netmap data, as a safety and recovery measure.
Updates #12639
Change-Id: I5c3c47c0204754b9c8e526a4ff8f69d6974db6d0
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
* Refer to "tailnet-lock" instead of "network-lock" in log messages
* Log keys as `tlpub:<hex>` rather than as Go structs
Updates tailscale/corp#39455
Updates tailscale/corp#37904
Change-Id: I644407d1eda029ee11027bcc949897aa4ba52787
Signed-off-by: Alex Chan <alexc@tailscale.com>
I omitted a lot of the min/max modernizers because they didn't
result in more clear code.
Some of it's older "for x := range 123".
Also: errors.AsType, any, fmt.Appendf, etc.
Updates #18682
Change-Id: I83a451577f33877f962766a5b65ce86f7696471c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
PR #18860 adds firewall rules in the mangle table to save outbound packet
marks to conntrack and restore them on reply packets before the routing
decision. When reply packets have their marks restored, the kernel uses
the correct routing table (based on the mark) and the packets pass the
rp_filter check.
This makes the risk check and reverse path filtering warnings unnecessary.
Updates #3310Fixestailscale/corp#37846
Signed-off-by: Mike O'Driscoll <mikeo@tailscale.com>
Under extremely high load it appears we may have some retention issues
as a result of queue depth build up, but there is currently no direct
way to observe this. The scenario does not trigger the slow subscriber
log message, and the event stream debugging endpoint produces a
saturating volume of information.
Updates tailscale/corp#36904
Signed-off-by: James Tucker <james@tailscale.com>
The Tailscale CLI has some methods to watch the IPN bus for
messages, say, the current netmap (`tailscale debug netmap`).
The Tailscale daemon supports this using a streaming HTTP
response. Sometimes, the client can close its connection
abruptly -- due to an interruption, or in the case of `debug netmap`,
intentionally after consuming one message.
If the server daemon is writing a response as the client closes
its end of the socket, the daemon typically encounters a "broken pipe"
error. The "Watch IPN Bus" handler currently logs such errors after
they're propagated by a JSON encoding/writer helper.
Since the Tailscale CLI nominally closes its socket with the daemon
in this slightly ungraceful way (viz. `debug netmap`), stop logging
these broken pipe errors as far as possible. This will help avoid
confounding users when they scan backend logs.
Updates #18477
Signed-off-by: Amal Bansode <amal@tailscale.com>
This file was never truly necessary and has never actually been used in
the history of Tailscale's open source releases.
A Brief History of AUTHORS files
---
The AUTHORS file was a pattern developed at Google, originally for
Chromium, then adopted by Go and a bunch of other projects. The problem
was that Chromium originally had a copyright line only recognizing
Google as the copyright holder. Because Google (and most open source
projects) do not require copyright assignemnt for contributions, each
contributor maintains their copyright. Some large corporate contributors
then tried to add their own name to the copyright line in the LICENSE
file or in file headers. This quickly becomes unwieldy, and puts a
tremendous burden on anyone building on top of Chromium, since the
license requires that they keep all copyright lines intact.
The compromise was to create an AUTHORS file that would list all of the
copyright holders. The LICENSE file and source file headers would then
include that list by reference, listing the copyright holder as "The
Chromium Authors".
This also become cumbersome to simply keep the file up to date with a
high rate of new contributors. Plus it's not always obvious who the
copyright holder is. Sometimes it is the individual making the
contribution, but many times it may be their employer. There is no way
for the proejct maintainer to know.
Eventually, Google changed their policy to no longer recommend trying to
keep the AUTHORS file up to date proactively, and instead to only add to
it when requested: https://opensource.google/docs/releasing/authors.
They are also clear that:
> Adding contributors to the AUTHORS file is entirely within the
> project's discretion and has no implications for copyright ownership.
It was primarily added to appease a small number of large contributors
that insisted that they be recognized as copyright holders (which was
entirely their right to do). But it's not truly necessary, and not even
the most accurate way of identifying contributors and/or copyright
holders.
In practice, we've never added anyone to our AUTHORS file. It only lists
Tailscale, so it's not really serving any purpose. It also causes
confusion because Tailscalars put the "Tailscale Inc & AUTHORS" header
in other open source repos which don't actually have an AUTHORS file, so
it's ambiguous what that means.
Instead, we just acknowledge that the contributors to Tailscale (whoever
they are) are copyright holders for their individual contributions. We
also have the benefit of using the DCO (developercertificate.org) which
provides some additional certification of their right to make the
contribution.
The source file changes were purely mechanical with:
git ls-files | xargs sed -i -e 's/\(Tailscale Inc &\) AUTHORS/\1 contributors/g'
Updates #cleanup
Change-Id: Ia101a4a3005adb9118051b3416f5a64a4a45987d
Signed-off-by: Will Norris <will@tailscale.com>
This change adds API to ipn.LocalBackend to retrieve the ETag when
querying for the current serve config. This allows consumers of
ipn.LocalBackend.SetServeConfig to utilize the concurrency control
offered by ETags. Previous to this change, utilizing serve config ETags
required copying the local backend's internal ETag calcuation.
The local API server was previously copying the local backend's ETag
calculation as described above. With this change, the local API server
now uses the new ETag retrieval function instead. Serve config ETags are
therefore now opaque to clients, in line with best practices.
Fixestailscale/corp#35857
Signed-off-by: Harry Harpham <harry@tailscale.com>
The existing client metric methods only support incrementing (or
decrementing) a delta value. This new method allows setting the metric
to a specific value.
Updates tailscale/corp#35327
Change-Id: Ia101a4a3005adb9118051b3416f5a64a4a45987d
Signed-off-by: Will Norris <will@tailscale.com>
With the introduction of node sealing, store.New fails in some cases due
to the TPM device being reset or unavailable. Currently it results in
tailscaled crashing at startup, which is not obvious to the user until
they check the logs.
Instead of crashing tailscaled at startup, start with an in-memory store
with a health warning about state initialization and a link to (future)
docs on what to do. When this health message is set, also block any
login attempts to avoid masking the problem with an ephemeral node
registration.
Updates #15830
Updates #17654
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This commit enables user to set service backend to remote destinations, that can be a partial
URL or a full URL. The commit also prevents user to set remote destinations on linux system
when socket mark is not working. For user on any version of mac extension they can't serve a
service either. The socket mark usability is determined by a new local api.
Fixestailscale/corp#24783
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
Adds the ability to rotate discovery keys on running clients, needed for
testing upcoming disco key distribution changes.
Introduces key.DiscoKey, an atomic container for a disco private key,
public key, and the public key's ShortString, replacing the prior
separate atomic fields.
magicsock.Conn has a new RotateDiscoKey method, and access to this is
provided via localapi and a CLI debug command.
Note that this implementation is primarily for testing as it stands, and
regular use should likely introduce an additional mechanism that allows
the old key to be used for some time, to provide a seamless key rotation
rather than one that invalidates all sessions.
Updates tailscale/corp#34037
Signed-off-by: James Tucker <james@tailscale.com>
It's an unnecessary nuisance having it. We go out of our way to redact
it in so many places when we don't even need it there anyway.
Updates #12639
Change-Id: I5fc72e19e9cf36caeb42cf80ba430873f67167c3
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Saves ~94 KB from the min build.
Updates #12614
Change-Id: I3b0b8a47f80b9fd3b1038c2834b60afa55bf02c2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Saves ~102 KB from the min build.
Updates #12614
Change-Id: Ie1d4f439321267b9f98046593cb289ee3c4d6249
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Saves 262 KB so far. I'm sure I missed some places, but shotizam says
these were the low hanging fruit.
Updates #12614
Change-Id: Ia31c01b454f627e6d0470229aae4e19d615e45e3
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Add and wire up event publishers for these two event types in the AppConnector.
Nothing currently subscribes to them, so this is harmless. Subscribers for
these events will be added in a near-future commit.
As part of this, move the appc.RouteInfo type to the types/appctype package.
It does not contain any package-specific details from appc. Beside it, add
appctype.RouteUpdate to carry route update event state, likewise not specific
to appc. Update all usage of the appc.* types throughout to use appctype.*
instead, and update depaware files to reflect these changes.
Add a Close method to the AppConnector to make sure the client gets cleaned up
when the connector is dropped (we re-create connectors).
Update the unit tests in the appc package to also check the events published
alongside calls to the RouteAdvertiser.
For now the tests still rely on the RouteAdvertiser for correctness; this is OK
for now as the two methods are always performed together. In the near future,
we need to rework the tests so not require that, but that will require building
some more test fixtures that we can handle separately.
Updates #15160
Updates #17192
Change-Id: I184670ba2fb920e0d2cb2be7c6816259bca77afe
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
Saves 442 KB. Lock it with a new min test.
Updates #12614
Change-Id: Ia7bf6f797b6cbf08ea65419ade2f359d390f8e91
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Saves 328 KB (2.5%) off the minimal binary.
For IoT devices that don't need MagicDNS (e.g. they don't make
outbound connections), this provides a knob to disable all the DNS
functionality.
Rather than a massive refactor today, this uses constant false values
as a deadcode sledgehammer, guided by shotizam to find the largest DNS
functions which survived deadcode.
A future refactor could make it so that the net/dns/resolver and
publicdns packages don't even show up in the import graph (along with
their imports) but really it's already pretty good looking with just
these consts, so it's not at the top of my list to refactor it more
soon.
Also do the same in a few places with the ACME (cert) functionality,
as I saw those while searching for DNS stuff.
Updates #12614
Change-Id: I8e459f595c2fde68ca16503ff61c8ab339871f97
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Allow the user to access information about routes an app connector has
learned, such as how many routes for each domain.
Fixestailscale/corp#32624
Signed-off-by: Fran Bull <fran@tailscale.com>
Removes 434 KB from the minimal Linux binary, or ~3%.
Primarily this comes from not linking in the zstd encoding code.
Fixes#17323
Change-Id: I0a90de307dfa1ad7422db7aa8b1b46c782bfaaf7
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The dnstype package is used by tailcfg, which tries to be light and
leafy. But it brings in dnstype. So dnstype shouldn't bring in
x/net/dns/dnsmessage.
Updates #12614
Change-Id: I043637a7ce7fed097e648001f13ca1927a781def
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
A customer wants to allow their employees to restart tailscaled at will, when access rights and MDM policy allow it,
as a way to fully reset client state and re-create the tunnel in case of connectivity issues.
On Windows, the main tailscaled process runs as a child of a service process. The service restarts the child
when it exits (or crashes) until the service itself is stopped. Regular (non-admin) users can't stop the service,
and allowing them to do so isn't ideal, especially in managed or multi-user environments.
In this PR, we add a LocalAPI endpoint that instructs ipnserver.Server, and by extension the tailscaled process,
to shut down. The service then restarts the child tailscaled. Shutting down tailscaled requires LocalAPI write access
and an enabled policy setting.
Updates tailscale/corp#32674
Updates tailscale/corp#32675
Signed-off-by: Nick Khyl <nickk@tailscale.com>
I'd started to do this in the earlier ts_omit_server PR but
decided to split it into this separate PR.
Updates #17128
Change-Id: Ief8823a78d1f7bbb79e64a5cab30a7d0a5d6ff4b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The Tracker was using direct callbacks to ipnlocal. This PR moves those
to be triggered via the eventbus.
Additionally, the eventbus is now closed on exit from tailscaled
explicitly, and health is now a SubSystem in tsd.
Updates #15160
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
This is a small introduction of the eventbus into controlclient that
communicates with mainly ipnlocal. While ipnlocal is a complicated part
of the codebase, the subscribers here are from the perspective of
ipnlocal already called async.
Updates #15160
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
As of this commit (per the issue), the Taildrive code remains where it
was, but in new files that are protected by the new ts_omit_drive
build tag. Future commits will move it.
Updates #17058
Change-Id: Idf0a51db59e41ae8da6ea2b11d238aefc48b219e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Some of the operations of the local API need an event bus to correctly
instantiate other components (notably including the portmapper).
This commit adds that, and as the parameter list is starting to get a bit long
and hard to read, I took the opportunity to move the arguments to a config
type. Only a few call sites needed to be updated and this API is not intended
for general use, so I did not bother to stage the change.
Updates #15160
Updates #16842
Change-Id: I7b057d71161bd859f5acb96e2f878a34c85be0ef
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
Make it possible to dump the eventbus graph as JSON or DOT to both debug
and document what is communicated via the bus.
Updates #15160
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
Brad Fitzpatrick
M. J. Fromberger
Alex Chan
Mike O'Driscoll
James Tucker
Amal Bansode
Will Norris
Harry Harpham
Andrew Lytvynov
KevinLiang10
James Tucker
James 'zofrex' Sanderson
Fran Bull
Nick Khyl
Claus Lensbøl
Jordan Whited