To write the init script.
And fix the JetKVM detection to work during early boot while the filesystem
and modules are still being loaded; it wasn't being detected on early boot
and then tailscaled was failing to start because it didn't know it was on JetKVM
and didn't modprobe tun.
Updates #16524
Change-Id: I0524ca3abd7ace68a69af96aab4175d32c07e116
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Updates the output for "tailscale ping" to indicate if a peer relay was traversed, just like the output for DERP or direct connections.
Fixestailscale/corp#30034
Signed-off-by: Dylan Bargatze <dylan@tailscale.com>
If the specified exit node string starts with "auto:" (i.e., can be parsed as an ipn.ExitNodeExpression),
we update ipn.Prefs.AutoExitNode instead of ipn.Prefs.ExitNodeID.
Fixes#16459
Signed-off-by: Nick Khyl <nickk@tailscale.com>
When running `tailscale exit-node list`, an empty city or country name
should be displayed as a hyphen "-". However, this only happened when
there was no location at all. If a node provides a Hostinfo.Location,
then the list would display exactly what was provided.
This patch changes the listing so that empty cities and countries will
either render the provided name or "-".
Fixes#16500
Signed-off-by: Simon Law <sfllaw@tailscale.com>
In this PR, we start passing a LocalAPI actor to (*LocalBackend).Logout to make it subject
to the same access check as disconnects made via tailscale down or the GUI.
We then update the CLI to allow `tailscale logout` to accept a reason, similar to `tailscale down`.
Updates tailscale/corp#26249
Signed-off-by: Nick Khyl <nickk@tailscale.com>
With this change, policy enforcement and exit node resolution can happen in separate steps,
since enforcement no longer depends on resolving the suggested exit node. This keeps policy
enforcement synchronous (e.g., when switching profiles), while allowing exit node resolution
to be asynchronous on netmap updates, link changes, etc.
Additionally, the new preference will be used to let GUIs and CLIs switch back to "auto" mode
after a manual exit node override, which is necessary for tailscale/corp#29969.
Updates tailscale/corp#29969
Updates #16459
Signed-off-by: Nick Khyl <nickk@tailscale.com>
This patch contains the following cleanups:
1. Simplify `ffcli.Command` definitions;
2. Word-wrap help text, consistent with other commands;
3. `tailscale dns --help` usage makes subcommand usage more obvious;
4. `tailscale dns query --help` describes DNS record types.
Updates #cleanup
Signed-off-by: Simon Law <sfllaw@tailscale.com>
This means the caller does not have to remember to close the reader, and avoids
having to duplicate the logic to decode JSON into events.
Updates #15160
Change-Id: I20186fabb02f72522f61d5908c4cc80b86b8936b
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
During a short period of packet loss, a TCP connection to the home DERP
may be maintained. If no other regions emerge as winners, such as when
all regions but one are avoided/disallowed as candidates, ensure that
the current home region, if still active, is not dropped as the
preferred region until it has failed two keepalives.
Relatedly apply avoid and no measure no home to ICMP and HTTP checks as
intended.
Updates tailscale/corp#12894
Updates tailscale/corp#29491
Signed-off-by: James Tucker <james@tailscale.com>
We already present a health warning about this, but it is easy to miss
on a server when blackholing traffic makes it unreachable.
In addition to a health warning, present a risk message when exit node
is enabled.
Example:
```
$ tailscale up --exit-node=lizard
The following issues on your machine will likely make usage of exit nodes impossible:
- interface "ens4" has strict reverse-path filtering enabled
- interface "tailscale0" has strict reverse-path filtering enabled
Please set rp_filter=2 instead of rp_filter=1; see https://github.com/tailscale/tailscale/issues/3310
To skip this warning, use --accept-risk=linux-strict-rp-filter
$
```
Updates #3310
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
RELNOTE=Fix CSRF errors in the client Web UI
Replace gorilla/csrf with a Sec-Fetch-Site based CSRF protection
middleware that falls back to comparing the Host & Origin headers if no
SFS value is passed by the client.
Add an -origin override to the web CLI that allows callers to specify
the origin at which the web UI will be available if it is hosted behind
a reverse proxy or within another application via CGI.
Updates #14872
Updates #15065
Signed-off-by: Patrick O'Doherty <patrick@tailscale.com>
The same message was used for "up" and "down" permission failures, but
"set" works better for both. Suggesting "up --operator" for a "down"
permission failure was confusing.
It's not like the latter command works in one shot anyway.
Fixes#16008
Change-Id: I6e4225ef06ce2d8e19c40bece8104e254c2aa525
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This fixes the implementation and test from #15208 which apparently
never worked.
Ignore the metacert when counting the number of expected certs
presented.
And fix the test, pulling out the TLSConfig setup code into something
shared between the real cmd/derper and the test.
Fixes#15579
Change-Id: I90526e38e59f89b480629b415f00587b107de10a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
For consistency with other flags, per Slack chat.
Updates #5902
Change-Id: I7ae1e4c97b37185573926f5fafda82cf8b46f071
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We were missing this metric, but it can be important for some workloads.
Varz memstats output allocation cost reduced from 30 allocs per
invocation to 1 alloc per invocation.
Updates tailscale/corp#28033
Signed-off-by: James Tucker <james@tailscale.com>
Co-authored-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In preparation for adding more parameters (and later, moving some away), rework
the portmapper constructor to accept its arguments on a Config struct rather
than positionally.
This is a breaking change to the function signature, but one that is very easy
to update, and a search of GitHub reveals only six instances of usage outside
clones and forks of Tailscale itself, that are not direct copies of the code
fixed up here.
While we could stub in another constructor, I think it is safe to let those
folks do the update in-place, since their usage is already affected by other
changes we can't test for anyway.
Updates #15160
Change-Id: I9f8a5e12b38885074c98894b7376039261b43f43
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
This flag is currently no-op and hidden. The flag does round trip
through the related pref. Subsequent commits will tie them to
net/udprelay.Server. There is no corresponding "tailscale up" flag,
enabling/disabling of the relay server will only be supported via
"tailscale set".
This is a string flag in order to support disablement via empty string
as a port value of 0 means "enable the server and listen on a random
unused port". Disablement via empty string also follows existing flag
convention, e.g. advertise-routes.
Early internal discussions settled on "tailscale set --relay="<port>",
but the author felt this was too ambiguous around client vs server, and
may cause confusion in the future if we add related flags.
Updates tailscale/corp#27502
Signed-off-by: Jordan Whited <jordan@tailscale.com>
`tailscale set` was created to set preferences, which used to be
overloaded into `tailscale up`. To move people over to the new
command, `up` was supposed to be frozen and no new preference flags
would be added. But people forgot, there was no test to warn them, and
so new flags were added anyway.
TestUpFlagSetIsFrozen complains when new flags are added to
`tailscale up`. It doesn’t try all combinations of GOOS, but since
the CI builds in every OS, the pull-request tests should cover this.
Updates #15460
Signed-off-by: Simon Law <sfllaw@sfllaw.ca>
The earlier #15534 prevent some dup string flags. This does it for all
flag types.
Updates #6813
Change-Id: Iec2871448394ea9a5b604310bdbf7b499434bf01
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Some CLI flags support multiple values separated by commas. These flags
are intended to be declared only once and will silently ignore subsequent
instances. This will now throw an error if multiple instances of advertise-tags
and advertise-routes are detected.
Fixes#6813
Signed-off-by: Jason O'Donnell <2160810+jasonodonnell@users.noreply.github.com>
This adds netx.DialFunc, unifying a type we have a bazillion other
places, giving it now a nice short name that's clickable in
editors, etc.
That highlighted that my earlier move (03b47a55c7) of stuff from
nettest into netx moved too much: it also dragged along the memnet
impl, meaning all users of netx.DialFunc who just wanted netx for the
type definition were instead also pulling in all of memnet.
So move the memnet implementation netx.Network into memnet, a package
we already had.
Then use netx.DialFunc in a bunch of places. I'm sure I missed some.
And plenty remain in other repos, to be updated later.
Updates tailscale/corp#27636
Change-Id: I7296cd4591218e8624e214f8c70dab05fb884e95
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
So we can link tailscale and tailscaled together into one.
Updates #5794
Change-Id: I9a8b793c64033827e4188931546cbd64db55982e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The default values for `tailscale up` and `tailscale set` are supposed
to agree for all common flags. But they don’t for `--accept-routes`
on Windows and from the Mac OS App Store, because `tailscale up`
computes this value based on the operating system:
user@host:~$ tailscale up --help 2>&1 | grep -A1 accept-routes
--accept-dns, --accept-dns=false
accept DNS configuration from the admin panel (default true)
user@host:~$ tailscale set --help 2>&1 | grep -A1 accept-routes
--accept-dns, --accept-dns=false
accept DNS configuration from the admin panel
Luckily, `tailscale set` uses `ipn.MaskedPrefs`, so the default values
don’t logically matter. But someone will get the wrong idea if they
trust the `tailscale set --help` documentation.
In addition, `ipn.Prefs.RouteAll` defaults to true so it disagrees
with both of the flags above.
This patch makes `--accept-routes` use the same logic for in both
commands by hoisting the logic that was buried in `cmd/tailscale/cli`
to `ipn.Prefs.DefaultRouteAll`. Then, all three of defaults can agree.
Fixes: #15319
Signed-off-by: Simon Law <sfllaw@sfllaw.ca>
The default values for `tailscale up` and `tailscale set` are supposed
to agree on all common flags. But they don’t for `--accept-dns`:
user@host:~$ tailscale up --help 2>&1 | grep -A1 accept-dns
--accept-dns, --accept-dns=false
accept DNS configuration from the admin panel (default true)
user@host:~$ tailscale set --help 2>&1 | grep -A1 accept-dns
--accept-dns, --accept-dns=false
accept DNS configuration from the admin panel
Luckily, `tailscale set` uses `ipn.MaskedPrefs`, so the default values
don’t logically matter. But someone will get the wrong idea if they
trust the `tailscale set --help` documentation.
This patch makes `--accept-dns` default to true in both commands and
also introduces `TestSetDefaultsMatchUpDefaults` to prevent any future
drift.
Fixes: #15319
Signed-off-by: Simon Law <sfllaw@sfllaw.ca>
This adds a portable way to do a raw LocalAPI request without worrying
about the Unix-vs-macOS-vs-Windows ways of hitting the LocalAPI server.
(It was already possible but tedious with 'tailscale debug local-creds')
Updates tailscale/corp#24690
Change-Id: I0828ca55edaedf0565c8db192c10f24bebb95f1b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Allows the use of tsweb without pulling in all of the heavy prometheus
client libraries, protobuf and so on.
Updates #15160
Signed-off-by: David Anderson <dave@tailscale.com>
* go.toolchain.branch: update to Go 1.24
Updates #15015
Change-Id: I29c934ec17e60c3ac3264f30fbbe68fc21422f4d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
* cmd/testwrapper: fix for go1.24
Updates #15015
Signed-off-by: Paul Scott <paul@tailscale.com>
* go.mod,Dockerfile: bump to Go 1.24
Also bump golangci-lint to a version that was built with 1.24
Updates #15015
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
---------
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Signed-off-by: Paul Scott <paul@tailscale.com>
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Co-authored-by: Paul Scott <paul@tailscale.com>
Co-authored-by: Andrew Lytvynov <awly@tailscale.com>
Even after we remove the deprecated API, we will want to maintain a minimal
API for internal use, in order to avoid importing the external
tailscale.com/client/tailscale/v2 package. This shim exposes only the necessary
parts of the deprecated API for internal use, which gains us the following:
1. It removes deprecation warnings for internal use of the API.
2. It gives us an inventory of which parts we will want to keep for internal use.
Updates tailscale/corp#22748
Signed-off-by: Percy Wegmann <percy@tailscale.com>
Introduce new TaildropTargetStatus in PeerStatus
Refactor getTargetStableID to solely rely on Status() instead of calling FileTargets(). This removes a possible race condition between the two calls and provides more detailed failure information if a peer can't receive files.
Updates tailscale/tailscale#14393
Signed-off-by: kari-ts <kari@tailscale.com>
The hiding of internal packages has hidden things I wanted to see a
few times now. Stop hiding them. This makes depaware.txt output a bit
longer, but not too much. Plus we only really look at it with diffs &
greps anyway; it's not like anybody reads the whole thing.
Updates #12614
Change-Id: I868c89eeeddcaaab63e82371651003629bc9bda8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We had the debug packet capture code + Lua dissector in the CLI + the
iOS app. Now we don't, with tests to lock it in.
As a bonus, tailscale.com/net/packet and tailscale.com/net/flowtrack
no longer appear in the CLI's binary either.
A new build tag ts_omit_capture disables the packet capture code and
was added to build_dist.sh's --extra-small mode.
Updates #12614
Change-Id: I79b0628c0d59911bd4d510c732284d97b0160f10
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Jordan Whited
Brad Fitzpatrick
Dylan Bargatze
Nick Khyl
Simon Law
Kristoffer Dalby
Anton Tolchanov
M. J. Fromberger
James Tucker
Claus Lensbøl
Patrick O'Doherty
David Anderson
Simon Law
Jason O'Donnell
Percy Wegmann
kari-ts
Sandro Jäckel
Andrea Gottardo
yejingchen