Switch from using the Comment field to a ts-scoped annotation for
tracking which operators are cooperating over ownership of a
VIPService.
Updates tailscale/corp#24795
Change-Id: I72d4a48685f85c0329aa068dc01a1a3c749017bf
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
cmd/k8s-operator,k8s-operator: allow using LE staging endpoint for Ingress
Allow to optionally use LetsEncrypt staging endpoint to issue
certs for Ingress/HA Ingress, so that it is easier to
experiment with initial Ingress setup without hiting rate limits.
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
This adds a portable way to do a raw LocalAPI request without worrying
about the Unix-vs-macOS-vs-Windows ways of hitting the LocalAPI server.
(It was already possible but tedious with 'tailscale debug local-creds')
Updates tailscale/corp#24690
Change-Id: I0828ca55edaedf0565c8db192c10f24bebb95f1b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
There was a flaky failure case where renaming a TLS hostname for an
ingress might leave the old hostname dangling in tailscaled config. This
happened when the proxygroup reconciler loop had an outdated resource
version of the config Secret in its cache after the
ingress-pg-reconciler loop had very recently written it to delete the
old hostname. As the proxygroup reconciler then did a patch, there was
no conflict and it reinstated the old hostname.
This commit updates the patch to an update operation so that if the
resource version is out of date it will fail with an optimistic lock
error. It also checks for equality to reduce the likelihood that we make
the update API call in the first place, because most of the time the
proxygroup reconciler is not even making an update to the Secret in the
case that the hostname has changed.
Updates tailscale/corp#24795
Change-Id: Ie23a97440063976c9a8475d24ab18253e1f89050
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
cmd/k8s-operator: configure HA Ingress replicas to share certs
Creates TLS certs Secret and RBAC that allows HA Ingress replicas
to read/write to the Secret.
Configures HA Ingress replicas to run in read-only mode.
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Update the HA Ingress controller to wait until it sees AdvertisedServices
config propagated into at least 1 Pod's prefs before it updates the status
on the Ingress, to ensure the ProxyGroup Pods are ready to serve traffic
before indicating that the Ingress is ready
Updates tailscale/corp#24795
Change-Id: I1b8ce23c9e312d08f9d02e48d70bdebd9e1a4757
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Allows the use of tsweb without pulling in all of the heavy prometheus
client libraries, protobuf and so on.
Updates #15160
Signed-off-by: David Anderson <dave@tailscale.com>
This PR adds some custom logic for reading and writing
kube store values that are TLS certs and keys:
1) when store is initialized, lookup additional
TLS Secrets for this node and if found, load TLS certs
from there
2) if the node runs in certs 'read only' mode and
TLS cert and key are not found in the in-memory store,
look those up in a Secret
3) if the node runs in certs 'read only' mode, run
a daily TLS certs reload to memory to get any
renewed certs
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
When the Ingress is updated to a new hostname, the controller does not
currently clean up the old VIPService from control. Fix this up to parse
the ownership comment correctly and write a test to enforce the improved
behaviour
Updates tailscale/corp#24795
Change-Id: I792ae7684807d254bf2d3cc7aa54aa04a582d1f5
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
This adds support for using ACL Grants to configure a role for the
auto-provisioned user.
Fixestailscale/corp#14567
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
cmd/containerboot: manage HA Ingress TLS certs from containerboot
When ran as HA Ingress node, containerboot now can determine
whether it should manage TLS certs for the HA Ingress replicas
and call the LocalAPI cert endpoint to ensure initial issuance
and renewal of the shared TLS certs.
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
updates tailscale/corp#26435
Adds client support for sending audit logs to control via /machine/audit-log.
Specifically implements audit logging for user initiated disconnections.
This will require further work to optimize the peristant storage and exclusion
via build tags for mobile:
tailscale/corp#27011tailscale/corp#27012
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
Ensure that the src address for a connection is one of the primary
addresses assigned by Tailscale. Not, for example, a virtual IP address.
Updates #14667
Signed-off-by: Fran Bull <fran@tailscale.com>
Add support for Cross-Origin XHR requests to the openid-configuration
endpoint to enable clients like Grafana's auto-population of OIDC setup
data from its contents.
Updates https://github.com/tailscale/tailscale/issues/10263
Signed-off-by: Patrick O'Doherty <patrick@tailscale.com>
natc itself can't immediately fix the problem, but it can more correctly
error that return bad addresses.
Updates tailscale/corp#26968
Signed-off-by: James Tucker <james@tailscale.com>
For people who can't use LetsEncrypt because it's banned.
Per https://github.com/tailscale/tailscale/issues/11776#issuecomment-2520955317
This does two things:
1) if you run derper with --certmode=manual and --hostname=$IP_ADDRESS
we previously permitted, but now we also:
* auto-generate the self-signed cert for you if it doesn't yet exist on disk
* print out the derpmap configuration you need to use that
self-signed cert
2) teaches derp/derphttp's derp dialer to verify the signature of
self-signed TLS certs, if so declared in the existing
DERPNode.CertName field, which previously existed for domain fronting,
separating out the dial hostname from how certs are validates,
so it's not overloaded much; that's what it was meant for.
Fixes#11776
Change-Id: Ie72d12f209416bb7e8325fe0838cd2c66342c5cf
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
cmd/k8s-operator: ensure HA Ingress can operate in multicluster mode.
Update the owner reference mechanism so that:
- if during HA Ingress resource creation, a VIPService
with some other operator's owner reference is already found,
just update the owner references to add one for this operator
- if during HA Ingress deletion, the VIPService is found to have owner
reference(s) from another operator, don't delete the VIPService, just
remove this operator's owner reference
- requeue after HA Ingress reconciles that resulted in VIPService updates,
to guard against overwrites due to concurrent operations from different
clusters.
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Use secure constant time comparisons for the client ID and secret values
during the allowRelyingParty authorization check.
Updates #cleanup
Signed-off-by: Patrick O'Doherty <patrick@tailscale.com>
Now that packets flow for VIPServices, the last piece needed to start
serving them from a ProxyGroup is config to tell the proxy Pods which
services they should advertise.
Updates tailscale/corp#24795
Change-Id: Ic7bbeac8e93c9503558107bc5f6123be02a84c77
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
We are soon going to start assigning shared-in nodes a CGNAT IPv4 in the Hello tailnet when necessary, the same way that normal node shares assign a new IPv4 on conflict.
But Hello wants to display the node's native IPv4, the one it uses in its own tailnet. That IPv4 isn't available anywhere in the netmap today, because it's not normally needed for anything.
We are going to start sending that native IPv4 in the peer node CapMap, only for Hello's netmap responses. This change enables Hello to display that native IPv4 instead, when available.
Updates tailscale/corp#25393
Change-Id: I87480b6d318ab028b41ef149eb3ba618bd7f1e08
Signed-off-by: Brian Palmer <brianp@tailscale.com>
* go.toolchain.branch: update to Go 1.24
Updates #15015
Change-Id: I29c934ec17e60c3ac3264f30fbbe68fc21422f4d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
* cmd/testwrapper: fix for go1.24
Updates #15015
Signed-off-by: Paul Scott <paul@tailscale.com>
* go.mod,Dockerfile: bump to Go 1.24
Also bump golangci-lint to a version that was built with 1.24
Updates #15015
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
---------
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Signed-off-by: Paul Scott <paul@tailscale.com>
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Co-authored-by: Paul Scott <paul@tailscale.com>
Co-authored-by: Andrew Lytvynov <awly@tailscale.com>
There's nothing about it on
https://github.com/multipath-tcp/mptcp_net-next/issues/ but empirically
MPTCP doesn't support this option on awly's kernel 6.13.2 and in GitHub
actions.
Updates #15015
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This will help debug unexpected issues encountered by consumers of the gitops-pusher.
Updates tailscale/corp#26664
Signed-off-by: Percy Wegmann <percy@tailscale.com>
Even after we remove the deprecated API, we will want to maintain a minimal
API for internal use, in order to avoid importing the external
tailscale.com/client/tailscale/v2 package. This shim exposes only the necessary
parts of the deprecated API for internal use, which gains us the following:
1. It removes deprecation warnings for internal use of the API.
2. It gives us an inventory of which parts we will want to keep for internal use.
Updates tailscale/corp#22748
Signed-off-by: Percy Wegmann <percy@tailscale.com>
testwrapper doesn't work with Go 1.24 and the coverage support is
making it harder to debug.
Updates #15015
Updates tailscale/corp#26659
Change-Id: I0125e881d08c92f1ecef88b57344f6bbb571b569
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In this PR, we enable the registration of LocalBackend extensions to exclude code specific to certain
platforms or environments. We then introduce desktopSessionsExt, which is included only in Windows builds
and only if the ts_omit_desktop_sessions tag is disabled for the build. This extension tracks desktop sessions
and switches to (or remains on) the appropriate profile when a user signs in or out, locks their screen,
or disconnects a remote session.
As desktopSessionsExt requires an ipn/desktop.SessionManager, we register it with tsd.System
for the tailscaled subprocess on Windows.
We also fix a bug in the sessionWatcher implementation where it attempts to close a nil channel on stop.
Updates #14823
Updates tailscale/corp#26247
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Introduce new TaildropTargetStatus in PeerStatus
Refactor getTargetStableID to solely rely on Status() instead of calling FileTargets(). This removes a possible race condition between the two calls and provides more detailed failure information if a peer can't receive files.
Updates tailscale/tailscale#14393
Signed-off-by: kari-ts <kari@tailscale.com>
Bart has had some substantial improvements in internal representation,
update functions, and other optimizations to reduce memory usage and
improve runtime performance.
Updates tailscale/corp#26353
Signed-off-by: James Tucker <james@tailscale.com>
These tunings reduced memory usage while the implementation was
struggling with earlier bugs, but will no longer be necessary after
those bugs are addressed.
Depends #14933
Depends #14934
Updates #9707
Updates #10408
Updates tailscale/corp#24483
Updates tailscale/corp#25169
Signed-off-by: James Tucker <james@tailscale.com>
Cubic performs better than Reno in higher BDP scenarios, and enables the
use of the hystart++ implementation contributed by Coder. This improves
throughput on higher BDP links with a much faster ramp.
gVisor is bumped as well for some fixes related to send queue processing
and RTT tracking.
Updates #9707
Updates #10408
Updates #12393
Updates tailscale/corp#24483
Updates tailscale/corp#25169
Signed-off-by: James Tucker <james@tailscale.com>
Incorrect disabled support for not having a mesh key in
d5316a4fbb
Allow for no mesh key to be set.
Fixes#14928
Signed-off-by: Mike O'Driscoll <mikeo@tailscale.com>
Since dynamic reload of setec is not supported
in derper at this time, close the server after
the secret is loaded.
Updates tailscale/corp#25756
Signed-off-by: Mike O'Driscoll <mikeo@tailscale.com>
It was moved in f57fa3cbc3.
Updates tailscale/corp#22748
Change-Id: I19f965e6bded1d4c919310aa5b864f2de0cd6220
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
A previous PR accidentally logged the key as part
of an error. Remove logging of the key.
Add log print for Setec store steup.
Updates tailscale/corp#25756
Signed-off-by: Mike O'Driscoll <mikeo@tailscale.com>
Add setec secret support for derper.
Support dev mode via env var, and setec via secrets URL.
For backwards compatibility use setec load from file also.
Updates tailscale/corp#25756
Signed-off-by: Mike O'Driscoll <mikeo@tailscale.com>
This change:
- reinstates the HA Ingress controller that was disabled for 1.80 release
- fixes the API calls to manage VIPServices as the API was changed
- triggers the HA Ingress reconciler on ProxyGroup changes
Updates tailscale/tailscale#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Many places that need to work with node/peer capabilities end up with a
something-View and need to either reimplement the helper code or make an
expensive copy. We have the machinery to easily handle this now.
Updates #cleanup
Change-Id: Ic3f55be329f0fc6c178de26b34359d0e8c6ca5fc
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
Tom Proctor
Irbe Krumina
Brad Fitzpatrick
David Anderson
Anton Tolchanov
Paul Scott
Jonathan Nobels
Fran Bull
Patrick O'Doherty
James Tucker
Sam Linville
James Sanderson
Brian Palmer
Andrew Lytvynov
Percy Wegmann
Nick Khyl
kari-ts
Sandro Jäckel
Mike O'Driscoll
Adrian Dewhurst