In this PR, we update LocalBackend to set WantRunning=true when applying policy settings
to the current profile's prefs, if the "always-on" mode is enabled.
We also implement a new (*LocalBackend).EditPrefsAs() method, which is like EditPrefs
but accepts an actor (e.g., a LocalAPI client's identity) that initiated the change.
If WantRunning is being set to false, the new EditPrefsAs method checks whether the actor
has ipnauth.Disconnect access to the profile and propagates an error if they do not.
Finally, we update (*ipnserver.actor).CheckProfileAccess to allow a disconnect
only if the "always-on" mode is not enabled by the AlwaysOn policy setting.
This is not a comprehensive solution to the "always-on" mode across platforms,
as instead of disconnecting a user could achieve the same effect by creating
a new empty profile, initiating a reauth, or by deleting the profile.
These are the things we should address in future PRs.
Updates #14823
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Conventionally, we use views (e.g., ipn.PrefsView, tailcfg.NodeView, etc.) when
dealing with structs that shouldn't be mutated. However, ipn.LoginProfile has been
an exception so far, with a mix of passing and returning LoginProfile by reference
(allowing accidental mutations) and by value (which is wasteful, given its
current size of 192 bytes).
In this PR, we generate an ipn.LoginProfileView and use it instead of passing/returning
LoginProfiles by mutable reference or copying them when passing/returning by value.
Now, LoginProfiles can only be mutated by (*profileManager).setProfilePrefs.
Updates #14823
Signed-off-by: Nick Khyl <nickk@tailscale.com>
We had the debug packet capture code + Lua dissector in the CLI + the
iOS app. Now we don't, with tests to lock it in.
As a bonus, tailscale.com/net/packet and tailscale.com/net/flowtrack
no longer appear in the CLI's binary either.
A new build tag ts_omit_capture disables the packet capture code and
was added to build_dist.sh's --extra-small mode.
Updates #12614
Change-Id: I79b0628c0d59911bd4d510c732284d97b0160f10
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
sync.OnceValue and slices.Compact were both added in Go 1.21.
cmp.Or was added in Go 1.22.
Updates #8632
Updates #11058
Change-Id: I89ba4c404f40188e1f8a9566c8aaa049be377754
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This provides an interface for a user to force a preferred DERP outcome
for all future netchecks that will take precedence unless the forced
region is unreachable.
The option does not persist and will be lost when the daemon restarts.
Updates tailscale/corp#18997
Updates tailscale/corp#24755
Signed-off-by: James Tucker <james@tailscale.com>
We have several places where LocalBackend instances are created for testing, but they are rarely shut down
when the tests that created them exit.
In this PR, we update newTestLocalBackend and similar functions to use testing.TB.Cleanup(lb.Shutdown)
to ensure LocalBackend instances are properly shut down during test cleanup.
Updates #12687
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Adds a /disconnect-control local API endpoint that just shuts down control client.
This can be run before shutting down an HA subnet router/app connector replica - it will ensure
that all connection to control are dropped and control thus considers this node inactive and tells
peers to switch over to another replica. Meanwhile the existing connections keep working (assuming
that the replica is given some graceful shutdown period).
Updates tailscale/tailscale#14020
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
In this PR, we add the tailscale syspolicy command with two subcommands: list, which displays
policy settings, and reload, which forces a reload of those settings. We also update the LocalAPI
and LocalClient to facilitate these additions.
Updates #12687
Signed-off-by: Nick Khyl <nickk@tailscale.com>
- `tailscale metrics print`: to show metric values in console
- `tailscale metrics write`: to write metrics to a file (with a tempfile
& rename dance, which is atomic on Unix).
Also, remove the `TS_DEBUG_USER_METRICS` envknob as we are getting
more confident in these metrics.
Updates tailscale/corp#22075
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
We add the ClientID() method to the ipnauth.Actor interface and updated ipnserver.actor to implement it.
This method returns a unique ID of the connected client if the actor represents one. It helps link a series
of interactions initiated by the client, such as when a notification needs to be sent back to a specific session,
rather than all active sessions, in response to a certain request.
We also add LocalBackend.WatchNotificationsAs and LocalBackend.StartLoginInteractiveAs methods,
which are like WatchNotifications and StartLoginInteractive but accept an additional parameter
specifying an ipnauth.Actor who initiates the operation. We store these actor identities in
watchSession.owner and LocalBackend.authActor, respectively,and implement LocalBackend.sendTo
and related helper methods to enable sending notifications to watchSessions associated with actors
(or, more broadly, identifiable recipients).
We then use the above to change who receives the BrowseToURL notifications:
- For user-initiated, interactive logins, the notification is delivered only to the user who initiated the
process. If the initiating actor represents a specific connected client, the URL notification is sent back
to the same LocalAPI client that called StartLoginInteractive. Otherwise, the notification is sent to all
clients connected as that user.
Currently, we only differentiate between users on Windows, as it is inherently a multi-user OS.
- In all other cases (e.g., node key expiration), we send the notification to all connected users.
Updates tailscale/corp#18342
Signed-off-by: Nick Khyl <nickk@tailscale.com>
We were using google/uuid in two places and that brought in database/sql/driver.
We didn't need it in either place.
Updates #13760
Updates tailscale/corp#20099
Change-Id: Ieed32f1bebe35d35f47ec5a2a429268f24f11f1f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
this commit changes usermetrics to be non-global, this is a building
block for correct metrics if a go process runs multiple tsnets or
in tests.
Updates #13420
Updates tailscale/corp#22075
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
Updates tailscale/tailscale#13326
Adds a CLI subcommand to perform DNS queries using the internal DNS forwarder and observe its internals (namely, which upstream resolvers are being used).
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
Updates tailscale/tailscale#13326
This PR begins implementing a `tailscale dns` command group in the Tailscale CLI. It provides an initial implementation of `tailscale dns status` which dumps the state of the internal DNS forwarder.
Two new endpoints were added in LocalAPI to support the CLI functionality:
- `/netmap`: dumps a copy of the last received network map (because the CLI shouldn't have to listen to the ipn bus for a copy)
- `/dns-osconfig`: dumps the OS DNS configuration (this will be very handy for the UI clients as well, as they currently do not display this information)
My plan is to implement other subcommands mentioned in tailscale/tailscale#13326, such as `query`, in later PRs.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
Currently, we use PermitRead/PermitWrite/PermitCert permission flags to determine which operations are allowed for a LocalAPI client.
These checks are performed when localapi.Handler handles a request. Additionally, certain operations (e.g., changing the serve config)
requires the connected user to be a local admin. This approach is inherently racey and is subject to TOCTOU issues.
We consider it to be more critical on Windows environments, which are inherently multi-user, and therefore we prevent more than one
OS user from connecting and utilizing the LocalBackend at the same time. However, the same type of issues is also applicable to other
platforms when switching between profiles that have different OperatorUser values in ipn.Prefs.
We'd like to allow more than one Windows user to connect, but limit what they can see and do based on their access rights on the device
(e.g., an local admin or not) and to the currently active LoginProfile (e.g., owner/operator or not), while preventing TOCTOU issues on Windows
and other platforms. Therefore, we'd like to pass an actor from the LocalAPI to the LocalBackend to represent the user performing the operation.
The LocalBackend, or the profileManager down the line, will then check the actor's access rights to perform a given operation on the device
and against the current (and/or the target) profile.
This PR does not change the current permission model in any way, but it introduces the concept of an actor and includes some preparatory
work to pass it around. Temporarily, the ipnauth.Actor interface has methods like IsLocalSystem and IsLocalAdmin, which are only relevant
to the current permission model. It also lacks methods that will actually be used in the new model. We'll be adding these gradually in the next
PRs and removing the deprecated methods and the Permit* flags at the end of the transition.
Updates tailscale/corp#18342
Signed-off-by: Nick Khyl <nickk@tailscale.com>
This commit adds a new usermetric package and wires
up metrics across the tailscale client.
Updates tailscale/corp#22075
Co-authored-by: Anton Tolchanov <anton@tailscale.com>
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
This prevents two things:
1. Crashing if there's no response body
2. Sending a nonsensical 0 response status code
Updates tailscale/corp#22357
Signed-off-by: Percy Wegmann <percy@tailscale.com>
Some users run "tailscale cert" in a cron job to renew their
certificates on disk. The time until the next cron job run may be long
enough for the old cert to expire with our default heristics.
Add a `--min-validity` flag which ensures that the returned cert is
valid for at least the provided duration (unless it's longer than the
cert lifetime set by Let's Encrypt).
Updates #8725
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Previously, we were registering TCP and UDP connections in the same map,
which could result in erroneously removing a mapping if one of the two
connections completes while the other one is still active.
Add a "proto string" argument to these functions to avoid this.
Additionally, take the "proto" argument in LocalAPI, and plumb that
through from the CLI and add a new LocalClient method.
Updates tailscale/corp#20600
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I35d5efaefdfbf4721e315b8ca123f0c8af9125fb
Add a new TS_EXPERIMENTAL_ENABLE_FORWARDING_OPTIMIZATIONS env var
that can be set for tailscale/tailscale container running as
a subnet router or exit node to enable UDP GRO forwarding
for improved performance.
See https://tailscale.com/kb/1320/performance-best-practices#linux-optimizations-for-subnet-routers-and-exit-nodes
This is currently considered an experimental approach;
the configuration support is partially to allow further experimentation
with containerized environments to evaluate the performance
improvements.
Updates tailscale/tailscale#12295
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
This adds a new ListenPacket function on tsnet.Server
which acts mostly like `net.ListenPacket`.
Unlike `Server.Listen`, this requires listening on a
specific IP and does not automatically listen on both
V4 and V6 addresses of the Server when the IP is unspecified.
To test this, it also adds UDP support to tsdial.Dialer.UserDial
and plumbs it through the localapi. Then an associated test
to make sure the UDP functionality works from both sides.
Updates #12182
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This fixes bugs where after using the cli to set AdvertiseRoutes users
were finding that they had to restart tailscaled before the app
connector would advertise previously learned routes again. And seems
more in line with user expectations.
Fixes#11006
Signed-off-by: Fran Bull <fran@tailscale.com>
This moves most of the health package global variables to a new
`health.Tracker` type.
But then rather than plumbing the Tracker in tsd.System everywhere,
this only goes halfway and makes one new global Tracker
(`health.Global`) that all the existing callers now use.
A future change will eliminate that global.
Updates #11874
Updates #4136
Change-Id: I6ee27e0b2e35f68cb38fecdb3b2dc4c3f2e09d68
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
There is an undocumented 16KiB limit for text log messages.
However, the limit for JSON messages is 256KiB.
Even worse, logging JSON as text results in significant overhead
since each double quote needs to be escaped.
Instead, use logger.Logf.JSON to explicitly log the info as JSON.
We also modify osdiag to return the information as structured data
rather than implicitly have the package log on our behalf.
This gives more control to the caller on how to log.
Updates #7802
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
This is primarily for GUIs, so they don't need to remember the most
recently used exit node themselves.
This adds some CLI commands, but they're disabled and behind the WIP
envknob, as we need to consider naming (on/off is ambiguous with
running an exit node, etc) as well as automatic exit node selection in
the future. For now the CLI commands are effectively developer debug
things to test the LocalAPI.
Updates tailscale/corp#18724
Change-Id: I9a32b00e3ffbf5b29bfdcad996a4296b5e37be7e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This change makes the normalizeShareName function public, so it can be
used for validation in control.
Updates tailscale/corp#16827
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
This change switches the api to /drive, rather than the previous /tailfs
as well as updates the log lines to reflect the new value. It also
cleans up some existing tailfs references.
Updates tailscale/corp#16827
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
This change updates all tailfs functions and the majority of the tailfs
variables to use the new drive naming.
Updates tailscale/corp#16827
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
This change updates the tailfs file and package names to their new
naming convention.
Updates #tailscale/corp#16827
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
This allows sending multiple files via Taildrop in one request.
Progress is tracked via ipn.Notify.
Updates tailscale/corp#18202
Signed-off-by: Percy Wegmann <percy@tailscale.com>
This allows sending multiple files via Taildrop in one request.
Progress is tracked via ipn.Notify.
Updates tailscale/corp#18202
Signed-off-by: Percy Wegmann <percy@tailscale.com>
To force the problem in its worst case scenario before fixing it.
Updates tailscale/corp#17859
Change-Id: I2c8b8e5f15c7801e1ab093feeafac52ec175a763
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
- Updates API to support renaming TailFS shares.
- Adds a CLI rename subcommand for renaming a share.
- Renames the CLI subcommand 'add' to 'set' to make it clear that
this is an add or update.
- Adds a unit test for TailFS in ipnlocal
Updates tailscale/corp#16827
Signed-off-by: Percy Wegmann <percy@tailscale.com>
Previously, the configuration of which folders to share persisted across
profile changes. Now, it is tied to the user's profile.
Updates tailscale/corp#16827
Signed-off-by: Percy Wegmann <percy@tailscale.com>
Updates tailscale/corp#17859
Provides a local API endpoint to be called from the GUI to inform the backend when the client menu is opened or closed.
cc @bradfitz
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
Signed-off-by: Andrea Gottardo <andrea@tailscale.com>
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
Add a WebDAV-based folder sharing mechanism that is exposed to local clients at
100.100.100.100:8080 and to remote peers via a new peerapi endpoint at
/v0/tailfs.
Add the ability to manage folder sharing via the new 'share' CLI sub-command.
Updates tailscale/corp#16827
Signed-off-by: Percy Wegmann <percy@tailscale.com>
Nick Khyl
Brad Fitzpatrick
Nahum Shalman
James Tucker
Anton Tolchanov
Irbe Krumina
Kristoffer Dalby
Andrea Gottardo
Percy Wegmann
Andrew Lytvynov
Andrew Dunham
Maisem Ali
Fran Bull
Joe Tsai
Claire Wang
Charlotte Brandhorst-Satzkorn
Andrea Gottardo
kari-ts