Remove the TS_EXPERIMENTAL_KUBE_API_EVENTS env var from the operator and its
helm chart. This has already been marked as deprecated, and has been
scheduled to be removed in release 1.96.
Add a check in helm chart to fail if the removed variable is set to true,
prompting users to move to ACLs instead.
Fixes: #18875
Signed-off-by: Becky Pauley <becky@tailscale.com>
* cmd/k8s-operator/deploy/examples
Adds exitnode.yaml to k8s-operator
Fixes#18086
Signed-off-by: Christopher Mosetick <office@cpm.is>
* cmd/k8s-operator/deploy/examples: update connector and add exitnode examples
- Remove exitNode: true from connector.yaml to keep it focused as a subnet router example
- Update connector.yaml header comment to remove exit node reference and add pointer hint to exitnode.yaml
- Clarify exitnode.yaml comments to accurately describe separate Connector deployment pattern
Fixes#18086
Signed-off-by: Christopher Mosetick <office@cpm.is>
* Update cmd/k8s-operator/deploy/examples/exitnode.yaml
Co-authored-by: David Bond <davidsbond@users.noreply.github.com>
Signed-off-by: Chris Mosetick <cmosetick@gmail.com>
* Update cmd/k8s-operator/deploy/examples/exitnode.yaml
Co-authored-by: David Bond <davidsbond@users.noreply.github.com>
Signed-off-by: Chris Mosetick <cmosetick@gmail.com>
* Update cmd/k8s-operator/deploy/examples/exitnode.yaml
Co-authored-by: David Bond <davidsbond@users.noreply.github.com>
Signed-off-by: Chris Mosetick <cmosetick@gmail.com>
* Update cmd/k8s-operator/deploy/examples/exitnode.yaml
Co-authored-by: David Bond <davidsbond@users.noreply.github.com>
Signed-off-by: Chris Mosetick <cmosetick@gmail.com>
---------
Signed-off-by: Christopher Mosetick <office@cpm.is>
Signed-off-by: Chris Mosetick <cmosetick@gmail.com>
Co-authored-by: David Bond <davidsbond@users.noreply.github.com>
This commit implements a reconciler for the new `ProxyGroupPolicy`
custom resource. When created, all `ProxyGroupPolicy` resources
within the same namespace are merged into two `ValidatingAdmissionPolicy`
resources, one for egress and one for ingress.
These policies use CEL expressions to limit the usage of the
"tailscale.com/proxy-group" annotation on `Service` and `Ingress`
resources on create & update.
Included here is also a new e2e test that ensures that resources that
violate the policy return an error on creation, and that once the
policy is changed to allow them they can be created.
Closes: https://github.com/tailscale/corp/issues/36830
Signed-off-by: David Bond <davidsbond93@gmail.com>
This commit adds a new custom resource definition to the kubernetes
operator named `ProxyGroupPolicy`. This resource is namespace scoped
and is used as an allow list for which `ProxyGroup` resources can be
used within its namespace.
The `spec` contains two fields, `ingress` and `egress`. These should
contain the names of `ProxyGroup` resources to denote which can be
used as values in the `tailscale.com/proxy-group` annotation within
`Service` and `Ingress` resources.
The intention is for these policies to be merged within a namespace and
produce a `ValidatingAdmissionPolicy` and `ValidatingAdmissionPolicyBinding`
for both ingress and egress that prevents users from using names of
`ProxyGroup` resources in those annotations.
Closes: https://github.com/tailscale/corp/issues/36829
Signed-off-by: David Bond <davidsbond93@gmail.com>
This file was never truly necessary and has never actually been used in
the history of Tailscale's open source releases.
A Brief History of AUTHORS files
---
The AUTHORS file was a pattern developed at Google, originally for
Chromium, then adopted by Go and a bunch of other projects. The problem
was that Chromium originally had a copyright line only recognizing
Google as the copyright holder. Because Google (and most open source
projects) do not require copyright assignemnt for contributions, each
contributor maintains their copyright. Some large corporate contributors
then tried to add their own name to the copyright line in the LICENSE
file or in file headers. This quickly becomes unwieldy, and puts a
tremendous burden on anyone building on top of Chromium, since the
license requires that they keep all copyright lines intact.
The compromise was to create an AUTHORS file that would list all of the
copyright holders. The LICENSE file and source file headers would then
include that list by reference, listing the copyright holder as "The
Chromium Authors".
This also become cumbersome to simply keep the file up to date with a
high rate of new contributors. Plus it's not always obvious who the
copyright holder is. Sometimes it is the individual making the
contribution, but many times it may be their employer. There is no way
for the proejct maintainer to know.
Eventually, Google changed their policy to no longer recommend trying to
keep the AUTHORS file up to date proactively, and instead to only add to
it when requested: https://opensource.google/docs/releasing/authors.
They are also clear that:
> Adding contributors to the AUTHORS file is entirely within the
> project's discretion and has no implications for copyright ownership.
It was primarily added to appease a small number of large contributors
that insisted that they be recognized as copyright holders (which was
entirely their right to do). But it's not truly necessary, and not even
the most accurate way of identifying contributors and/or copyright
holders.
In practice, we've never added anyone to our AUTHORS file. It only lists
Tailscale, so it's not really serving any purpose. It also causes
confusion because Tailscalars put the "Tailscale Inc & AUTHORS" header
in other open source repos which don't actually have an AUTHORS file, so
it's ambiguous what that means.
Instead, we just acknowledge that the contributors to Tailscale (whoever
they are) are copyright holders for their individual contributions. We
also have the benefit of using the DCO (developercertificate.org) which
provides some additional certification of their right to make the
contribution.
The source file changes were purely mechanical with:
git ls-files | xargs sed -i -e 's/\(Tailscale Inc &\) AUTHORS/\1 contributors/g'
Updates #cleanup
Change-Id: Ia101a4a3005adb9118051b3416f5a64a4a45987d
Signed-off-by: Will Norris <will@tailscale.com>
This commit contains the implementation of multi-tailnet support within the Kubernetes Operator
Each of our custom resources now expose the `spec.tailnet` field. This field is a string that must match the name of an existing `Tailnet` resource. A `Tailnet` resource looks like this:
```yaml
apiVersion: tailscale.com/v1alpha1
kind: Tailnet
metadata:
name: example # This is the name that must be referenced by other resources
spec:
credentials:
secretName: example-oauth
```
Each `Tailnet` references a `Secret` resource that contains a set of oauth credentials. This secret must be created in the same namespace as the operator:
```yaml
apiVersion: v1
kind: Secret
metadata:
name: example-oauth # This is the name that's referenced by the Tailnet resource.
namespace: tailscale
stringData:
client_id: "client-id"
client_secret: "client-secret"
```
When created, the operator performs a basic check that the oauth client has access to all required scopes. This is done using read actions on devices, keys & services. While this doesn't capture a missing "write" permission, it catches completely missing permissions. Once this check passes, the `Tailnet` moves into a ready state and can be referenced. Attempting to use a `Tailnet` in a non-ready state will stall the deployment of `Connector`s, `ProxyGroup`s and `Recorder`s until the `Tailnet` becomes ready.
The `spec.tailnet` field informs the operator that a `Connector`, `ProxyGroup`, or `Recorder` must be given an auth key generated using the specified oauth client. For backwards compatibility, the set of credentials the operator is configured with are considered the default. That is, where `spec.tailnet` is not set, the resource will be deployed in the same tailnet as the operator.
Updates https://github.com/tailscale/corp/issues/34561
* cmd/k8s-operator/e2e: run self-contained e2e tests with devcontrol
Adds orchestration for more of the e2e testing setup requirements to
make it easier to run them in CI, but also run them locally in a way
that's consistent with CI. Requires running devcontrol, but otherwise
supports creating all the scaffolding required to exercise the operator
and proxies.
Updates tailscale/corp#32085
Change-Id: Ia7bff38af3801fd141ad17452aa5a68b7e724ca6
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
* cmd/k8s-operator/e2e: being more specific on tmp dir cleanup
Signed-off-by: chaosinthecrd <tom@tmlabs.co.uk>
---------
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Signed-off-by: chaosinthecrd <tom@tmlabs.co.uk>
Co-authored-by: chaosinthecrd <tom@tmlabs.co.uk>
This commit adds the `spec.replicas` field to the `Recorder` custom
resource that allows for a highly available deployment of `tsrecorder`
within a kubernetes cluster.
Many changes were required here as the code hard-coded the assumption
of a single replica. This has required a few loops, similar to what we
do for the `Connector` resource to create auth and state secrets. It
was also required to add a check to remove dangling state and auth
secrets should the recorder be scaled down.
Updates: https://github.com/tailscale/tailscale/issues/17965
Signed-off-by: David Bond <davidsbond93@gmail.com>
ArgoCD sends boolean values but the template expects strings, causing
"incompatible types for comparison" errors. Wrap values with toString
so both work.
Fixes#17158
Signed-off-by: Raj Singh <raj@tailscale.com>
This commit modifies the helm/static manifest configuration for the
k8s-operator to prefer the stable image tag. This avoids making those
using static manifests seeing unstable behaviour by default if they
do not manually make the change.
This is managed for us when using helm but not when generating the
static manifests.
Updates https://github.com/tailscale/tailscale/issues/10655
Signed-off-by: David Bond <davidsbond93@gmail.com>
The feature is currently in private alpha, so requires a tailnet feature
flag. Initially focuses on supporting the operator's own auth, because the
operator is the only device we maintain that uses static long-lived
credentials. All other operator-created devices use single-use auth keys.
Testing steps:
* Create a cluster with an API server accessible over public internet
* kubectl get --raw /.well-known/openid-configuration | jq '.issuer'
* Create a federated OAuth client in the Tailscale admin console with:
* The issuer from the previous step
* Subject claim `system:serviceaccount:tailscale:operator`
* Write scopes services, devices:core, auth_keys
* Tag tag:k8s-operator
* Allow the Tailscale control plane to get the public portion of
the ServiceAccount token signing key without authentication:
* kubectl create clusterrolebinding oidc-discovery \
--clusterrole=system:service-account-issuer-discovery \
--group=system:unauthenticated
* helm install --set oauth.clientId=... --set oauth.audience=...
Updates #17457
Change-Id: Ib29c85ba97b093c70b002f4f41793ffc02e6c6e9
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Add a .gitignore for the chart version of the CRDs that we never commit,
because the static manifest CRD files are the canonical version. This
makes it easier to deploy the CRDs via the helm chart in a way that
reflects the production workflow without making the git checkout
"dirty".
Given that the chart CRDs are ignored, we can also now safely generate
them for the kube-generate-all Makefile target without being a nuisance
to the state of the git checkout. Added a slightly more robust repo root
detection to the generation logic to make sure the command works from
the context of both the Makefile and the image builder command we run
for releases in corp.
Updates tailscale/corp#32085
Change-Id: Id44a4707c183bfaf95a160911ec7a42ffb1a1287
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
DNS configuration support to ProxyClass, allowing users to customize DNS resolution for Tailscale proxy pods.
Fixes#16886
Signed-off-by: Raj Singh <raj@tailscale.com>
This commit modifies the `DNSConfig` custom resource to allow specifying
a replica count when deploying a nameserver. This allows deploying
nameservers in a HA configuration.
Updates https://github.com/tailscale/corp/issues/32589
Signed-off-by: David Bond <davidsbond93@gmail.com>
This change adds full IPv6 support to the Kubernetes operator's DNS functionality,
enabling dual-stack and IPv6-only cluster support.
Fixes#16633
Signed-off-by: Raj Singh <raj@tailscale.com>
This commit adds a `replicas` field to the `Connector` custom resource that
allows users to specify the number of desired replicas deployed for their
connectors.
This allows users to deploy exit nodes, subnet routers and app connectors
in a highly available fashion.
Fixes#14020
Signed-off-by: David Bond <davidsbond93@gmail.com>
* cmd/k8s-operator,k8s-operator: allow setting a `priorityClassName`
Fixes#16682
Signed-off-by: Lee Briggs <lee@leebriggs.co.uk>
* Update k8s-operator/apis/v1alpha1/types_proxyclass.go
Co-authored-by: Tom Proctor <tomhjp@users.noreply.github.com>
Signed-off-by: Lee Briggs <jaxxstorm@users.noreply.github.com>
* run make kube-generate-all
Change-Id: I5f8f16694fdc181b048217b9f05ec2ee2aa04def
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
---------
Signed-off-by: Lee Briggs <lee@leebriggs.co.uk>
Signed-off-by: Lee Briggs <jaxxstorm@users.noreply.github.com>
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Co-authored-by: Tom Proctor <tomhjp@users.noreply.github.com>
This commit modifies the kubernetes operator's `DNSConfig` resource
with the addition of a new field at `nameserver.service.clusterIP`.
This field allows users to specify a static in-cluster IP address of
the nameserver when deployed.
Fixes#14305
Signed-off-by: David Bond <davidsbond93@gmail.com>
Adds a new reconciler for ProxyGroups of type kube-apiserver that will
provision a Tailscale Service for each replica to advertise. Adds two
new condition types to the ProxyGroup, TailscaleServiceValid and
TailscaleServiceConfigured, to post updates on the state of that
reconciler in a way that's consistent with the service-pg reconciler.
The created Tailscale Service name is configurable via a new ProxyGroup
field spec.kubeAPISserver.ServiceName, which expects a string of the
form "svc:<dns-label>".
Lots of supporting changes were needed to implement this in a way that's
consistent with other operator workflows, including:
* Pulled containerboot's ensureServicesUnadvertised and certManager into
kube/ libraries to be shared with k8s-proxy. Use those in k8s-proxy to
aid Service cert sharing between replicas and graceful Service shutdown.
* For certManager, add an initial wait to the cert loop to wait until
the domain appears in the devices's netmap to avoid a guaranteed error
on the first issue attempt when it's quick to start.
* Made several methods in ingress-for-pg.go and svc-for-pg.go into
functions to share with the new reconciler
* Added a Resource struct to the owner refs stored in Tailscale Service
annotations to be able to distinguish between Ingress- and ProxyGroup-
based Services that need cleaning up in the Tailscale API.
* Added a ListVIPServices method to the internal tailscale client to aid
cleaning up orphaned Services
* Support for reading config from a kube Secret, and partial support for
config reloading, to prevent us having to force Pod restarts when
config changes.
* Fixed up the zap logger so it's possible to set debug log level.
Updates #13358
Change-Id: Ia9607441157dd91fb9b6ecbc318eecbef446e116
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Adds a new k8s-proxy command to convert operator's in-process proxy to
a separately deployable type of ProxyGroup: kube-apiserver. k8s-proxy
reads in a new config file written by the operator, modelled on tailscaled's
conffile but with some modifications to ensure multiple versions of the
config can co-exist within a file. This should make it much easier to
support reading that config file from a Kube Secret with a stable file name.
To avoid needing to give the operator ClusterRole{,Binding} permissions,
the helm chart now optionally deploys a new static ServiceAccount for
the API Server proxy to use if in auth mode.
Proxies deployed by kube-apiserver ProxyGroups currently work the same as
the operator's in-process proxy. They do not yet leverage Tailscale Services
for presenting a single HA DNS name.
Updates #13358
Change-Id: Ib6ead69b2173c5e1929f3c13fb48a9a5362195d8
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Based on feedback that it wasn't clear what the user is meant to do with
the output of the last command, clarify that it's an optional command to
explore what got created.
Updates #13427
Change-Id: Iff64ec6d02dc04bf4bbebf415d7ed1a44e7dd658
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
This commit modifies the k8s operator to allow for customisation of the ingress class name
via a new `OPERATOR_INGRESS_CLASS_NAME` environment variable. For backwards compatibility,
this defaults to `tailscale`.
When using helm, a new `ingress.name` value is provided that will set this environment variable
and modify the name of the deployed `IngressClass` resource.
Fixes https://github.com/tailscale/tailscale/issues/16248
Signed-off-by: David Bond <davidsbond93@gmail.com>
Refactors setting status into its own top-level function to make it
easier to ensure we _always_ set the status if it's changed on every
reconcile. Previously, it was possible to have stale status if some
earlier part of the provision logic failed.
Updates #16327
Change-Id: Idab0cfc15ae426cf6914a82f0d37a5cc7845236b
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
This commit modifies the operator helm chart values to bring the newly
added `loginServer` field to the top level. We felt as though it was a bit
confusing to be at the `operatorConfig` level as this value modifies the
behaviour or the operator, api server & all resources that the operator
manages.
Updates https://github.com/tailscale/corp/issues/29847
Signed-off-by: David Bond <davidsbond93@gmail.com>
This commit modifies the kubernetes operator to allow for customisation of the tailscale
login url. This provides some data locality for people that want to configure it.
This value is set in the `loginServer` helm value and is propagated down to all resources
managed by the operator. The only exception to this is recorder nodes, where additional
changes are required to support modifying the url.
Updates https://github.com/tailscale/corp/issues/29847
Signed-off-by: David Bond <davidsbond93@gmail.com>
This commit adds a NOTES.txt to the operator helm chart that will be written to the
terminal upon successful installation of the operator.
It includes a small list of knowledgebase articles with possible next steps for
the actor that installed the operator to the cluster. It also provides possible
commands to use for explaining the custom resources.
Fixes#13427
Signed-off-by: David Bond <davidsbond93@gmail.com>
This reconciler allows users to make applications highly available at L3 by
leveraging Tailscale Virtual Services. Many Kubernetes Service's
(irrespective of the cluster they reside in) can be mapped to a
Tailscale Virtual Service, allowing access to these Services at L3.
Updates #15895
Signed-off-by: chaosinthecrd <tom@tmlabs.co.uk>
Adds Recorder fields to configure the name and annotations of the ServiceAccount
created for and used by its associated StatefulSet. This allows the created Pod
to authenticate with AWS without requiring a Secret with static credentials,
using AWS' IAM Roles for Service Accounts feature, documented here:
https://docs.aws.amazon.com/eks/latest/userguide/iam-roles-for-service-accounts.htmlFixes#15875
Change-Id: Ib0e15c0dbc357efa4be260e9ae5077bacdcb264f
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
This change introduces an Age column in the output for all custom
resources to enhance visibility into their lifecycle status.
Fixes#15499
Signed-off-by: satyampsoni <satyampsoni@gmail.com>
Re-enable HA Ingress again that was disabled for 1.82 release.
This reverts commit fea74a60d5.
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Temporarily make sure that the HA Ingress reconciler does not run,
as we do not want to release this to stable just yet.
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
cmd/k8s-operator,k8s-operator: allow using LE staging endpoint for Ingress
Allow to optionally use LetsEncrypt staging endpoint to issue
certs for Ingress/HA Ingress, so that it is easier to
experiment with initial Ingress setup without hiting rate limits.
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
cmd/k8s-operator: configure HA Ingress replicas to share certs
Creates TLS certs Secret and RBAC that allows HA Ingress replicas
to read/write to the Secret.
Configures HA Ingress replicas to run in read-only mode.
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
This change:
- reinstates the HA Ingress controller that was disabled for 1.80 release
- fixes the API calls to manage VIPServices as the API was changed
- triggers the HA Ingress reconciler on ProxyGroup changes
Updates tailscale/tailscale#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
The HA Ingress functionality is not actually doing anything
valuable yet, so don't run the controller in 1.80 release yet.
Updates tailscale/tailscale#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
This change builds on top of #14436 to ensure minimum downtime during egress ProxyGroup update rollouts:
- adds a readiness gate for ProxyGroup replicas that prevents kubelet from marking
the replica Pod as ready before a corresponding readiness condition has been added
to the Pod
- adds a reconciler that reconciles egress ProxyGroup Pods and, for each that is not ready,
if cluster traffic for relevant egress endpoints is routed via this Pod- if so add the
readiness condition to allow kubelet to mark the Pod as ready.
During the sequenced StatefulSet update rollouts kubelet does not restart
a Pod before the previous replica has been updated and marked as ready, so
ensuring that a replica is not marked as ready allows to avoid a temporary
post-update situation where all replicas have been restarted, but none of the
new ones are yet set up as an endpoint for the egress service, so cluster traffic is dropped.
Updates tailscale/tailscale#14326
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/k8s-operator,k8s-operator: allow users to set custom labels for the optional ServiceMonitor
Updates tailscale/tailscale#14381
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Currently this does not yet do anything apart from creating
the ProxyGroup resources like StatefulSet.
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
cmd/k8s-operator/deploy/chart: allow reading OAuth creds from a CSI driver's volume and annotating operator's Service account
Updates #14264
Signed-off-by: Oliver Rahner <o.rahner@dke-data.com>
* cmd/k8s-operator,k8s-operator,go.mod: optionally create ServiceMonitor
Adds a new spec.metrics.serviceMonitor field to ProxyClass.
If that's set to true (and metrics are enabled), the operator
will create a Prometheus ServiceMonitor for each proxy to which
the ProxyClass applies.
Additionally, create a metrics Service for each proxy that has
metrics enabled.
Updates tailscale/tailscale#11292
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
We were previously relying on unintended behaviour by runc where
all containers where by default given read/write/mknod permissions
for tun devices.
This behaviour was removed in https://github.com/opencontainers/runc/pull/3468
and released in runc 1.2.
Containerd container runtime, used by Docker and majority of Kubernetes distributions
bumped runc to 1.2 in 1.7.24 https://github.com/containerd/containerd/releases/tag/v1.7.24
thus breaking our reference tun mode Tailscale Kubernetes manifests and Kubernetes
operator proxies.
This PR changes the all Kubernetes container configs that run Tailscale in tun mode
to privileged. This should not be a breaking change because all these containers would
run in a Pod that already has a privileged init container.
Updates tailscale/tailscale#14256
Updates tailscale/tailscale#10814
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
containerboot:
Adds 3 new environment variables for containerboot, `TS_LOCAL_ADDR_PORT` (default
`"${POD_IP}:9002"`), `TS_METRICS_ENABLED` (default `false`), and `TS_DEBUG_ADDR_PORT`
(default `""`), to configure metrics and debug endpoints. In a follow-up PR, the
health check endpoint will be updated to use the `TS_LOCAL_ADDR_PORT` if
`TS_HEALTHCHECK_ADDR_PORT` hasn't been set.
Users previously only had access to internal debug metrics (which are unstable
and not recommended) via passing the `--debug` flag to tailscaled, but can now
set `TS_METRICS_ENABLED=true` to expose the stable metrics documented at
https://tailscale.com/kb/1482/client-metrics at `/metrics` on the addr/port
specified by `TS_LOCAL_ADDR_PORT`.
Users can also now configure a debug endpoint more directly via the
`TS_DEBUG_ADDR_PORT` environment variable. This is not recommended for production
use, but exposes an internal set of debug metrics and pprof endpoints.
operator:
The `ProxyClass` CRD's `.spec.metrics.enable` field now enables serving the
stable user metrics documented at https://tailscale.com/kb/1482/client-metrics
at `/metrics` on the same "metrics" container port that debug metrics were
previously served on. To smooth the transition for anyone relying on the way the
operator previously consumed this field, we also _temporarily_ serve tailscaled's
internal debug metrics on the same `/debug/metrics` path as before, until 1.82.0
when debug metrics will be turned off by default even if `.spec.metrics.enable`
is set. At that point, anyone who wishes to continue using the internal debug
metrics (not recommended) will need to set the new `ProxyClass` field
`.spec.statefulSet.pod.tailscaleContainer.debug.enable`.
Users who wish to opt out of the transitional behaviour, where enabling
`.spec.metrics.enable` also enables debug metrics, can set
`.spec.statefulSet.pod.tailscaleContainer.debug.enable` to false (recommended).
Separately but related, the operator will no longer specify a host port for the
"metrics" container port definition. This caused scheduling conflicts when k8s
needs to schedule more than one proxy per node, and was not necessary for allowing
the pod's port to be exposed to prometheus scrapers.
Updates #11292
---------
Co-authored-by: Kristoffer Dalby <kristoffer@tailscale.com>
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
BeckyPauley
Chris Mosetick
David Bond
Tom Meadows
Will Norris
Tom Proctor
Raj Singh
Lee Briggs
Satyam Soni
Irbe Krumina
Oliver Rahner